[U-Boot] Problems with USB mass storage on at91sam9263

[Remy Bohmer]

Hello,

2009/1/14 Paal Bakken <pabakken at online.no>:
> I have problems with usb mass storage in u-boot.
> We have our own at91sam9263 board, but I experience exactly the same problems on the standard at91sam9263ek. And the usb-port AND memory stick works fine in linux. I have tried both FAT and FAT32. Below follows an edited screendump of some usb commands with a u-boot snapshot version from 13.01.2009.

The current version should work, indeed a lot has been done in that
area for these cores. However, IIRC there were some problems with the
bootstrap code not initialising the PLLB correctly, which resulted in
similar errors. I thought that Stelian got it to work finally on this
particular core as well, so maybe he can confirm this. (I concentrated
the patches on the sam9261)

Kind Regards,

Remy

> (Re)start USB...
> USB:   scanning bus for devices... 2 USB Device(s) found
>       scanning bus for storage devices... ERROR:  USB-error: STALL: TD was moved to the Done Queue because the endpoint returned a STALL PID (4)
> ERROR: USB-error: STALL: TD was moved to the Done Queue because the endpoint returned a STALL PID (4)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> :
>        225 more of the same error? :-)
> :
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5) Device NOT ready
>   Request Sense returned 00 00 00
> 1 Storage Device(s) found
>
> DUnf-Boot2009> usb tree
>
> Device Tree:
>  1  Hub (12MBit/s, 0mA)
>  |   OHCI Root Hub
>  |
>  |?-2  Mass Storage (12MBit/s, 100mA)
>       TTI-MSA      USB 2.0 Mobile Disk     FF04091900068
>
> DUnf-Boot2009> usb info
>
> 1: Hub,  USB Revision 1.10
>  -  OHCI Root Hub
>  - Class: Hub
>  - PacketSize: 8  Configurations: 1
>  - Vendor: 0x0000  Product 0x0000 Version 0.0
>   Configuration: 1
>   - Interfaces: 1 Self Powered 0mA
>     Interface: 0
>     - Alternate Setting 0, Endpoints: 1
>     - Class Hub
>     - Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms
>
> 2: Mass Storage,  USB Revision 2.0
>  - TTI-MSA      USB 2.0 Mobile Disk     FF04091900068
>  - Class: (from Interface) Mass Storage
>  - PacketSize: 64  Configurations: 1
>  - Vendor: 0x126f  Product 0x1325 Version 1.0
>   Configuration: 1
>   - Interfaces: 1 Bus Powered 100mA
>   - ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
>
>     Interface: 0
>     - Alternate Setting 0, Endpoints: 3
>     - Class Mass Storage, Transp. SCSI, Bulk only
>     - ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
> ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did not provide a handshake (OUT) (5)
>
>     - Endpoint 1 In Bulk MaxPacket 64
>     - Endpoint 2 Out Bulk MaxPacket 64
>     - Endpoint 3 In Interrupt MaxPacket 2 Interval 1ms
>
> DUnf-Boot2009> usb storage
>  Device 0: Vendor:  Rev:  Prod:
>            Type: Removable Hard Disk
>            Capacity: not available
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>