[U-Boot] [PATCH 01/03 v2] Add inverted clock polarity support for Atmel LCD driver

[Dimitar Dimitrov]

This is my second try for Olimex SAM9-L9260/61 board support patches. 
I deleted the board ethernet initialization and hopefully will add
it later in a state that can be accepted.

Here follows the first patch.
---

Boards utilizing the Atmel LCD driver can now specify that the LCD clock must
be inverted by defining the macro CONFIG_ATMEL_LCD_INVCLK.

Signed-off-by: Dimitar Dimitrov <dinuxbg at gmail.com>
---
 drivers/video/atmel_lcdfb.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index db86763..64f8e87 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -112,6 +112,9 @@ void lcd_ctrl_init(void *lcdbase)
 
 	value |= panel_info.vl_sync;
 	value |= (panel_info.vl_bpix << 5);
+#if defined(CONFIG_ATMEL_LCD_INVCLK)
+	value |= ATMEL_LCDC_INVCLK_INVERTED;
+#endif
 	lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
 
 	/* Vertical timing */
-- 
1.5.6.1