[U-Boot] [PATCH] OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000.
Dirk Behme
dirk.behme at googlemail.com
Tue Mar 17 11:19:23 CET 2009
Fix OMAP3 timer handling to 1ms tick and CONFIG_SYS_HZ to 1000.
Clean up macros and comments.
Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
Signed-off-by: Manikandan Pillai <mani.pillai at ti.com>
---
Changes from Mani's original patch which is replaced by this [1]:
* Don't remove overflow handling in get_timer_masked()
* Update omap3_zoom1.h, too.
* Clean up timer related comments and macros in config files
* Don't touch reset_timer_masked()
* Switch divider clock divider from 256 to 8 to be able to get 1000Hz
* Remove unused udelay_masked()
* Minor clean up of get_tbclk()
[1] http://lists.denx.de/pipermail/u-boot/2009-March/049012.html
This patch is against U-Boot mainline commit
'b3dd629e78870ba2dc9f8032978721c0fa02a856'
'Prepare 2009.03-rc2'
cpu/arm_cortexa8/omap3/interrupts.c | 50 +++++++++++-------------------------
include/configs/omap3_beagle.h | 11 +++----
include/configs/omap3_evm.h | 15 +++++-----
include/configs/omap3_overo.h | 11 +++----
include/configs/omap3_pandora.h | 11 +++----
include/configs/omap3_zoom1.h | 11 +++----
6 files changed, 43 insertions(+), 66 deletions(-)
Index: u-boot-main/cpu/arm_cortexa8/omap3/interrupts.c
===================================================================
--- u-boot-main.orig/cpu/arm_cortexa8/omap3/interrupts.c
+++ u-boot-main/cpu/arm_cortexa8/omap3/interrupts.c
@@ -169,7 +169,16 @@ static ulong timestamp;
static ulong lastinc;
static gptimer_t *timer_base = (gptimer_t *)CONFIG_SYS_TIMERBASE;
-/* nothing really to do with interrupts, just starts up a counter. */
+/*
+ * Nothing really to do with interrupts, just starts up a counter.
+ * We run the counter with 13MHz, divided by 8, resulting in timer
+ * frequency of 1.625MHz. With 32bit counter register, counter
+ * overflows in ~44min
+ */
+
+/* 13MHz / 8 = 1.625MHz */
+#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PVT))
+
int interrupt_init(void)
{
/* start the counter ticking up, reload value on overflow */
@@ -232,50 +241,25 @@ void udelay(unsigned long usec)
void reset_timer_masked(void)
{
/* reset time, capture current incrementer value time */
- lastinc = readl(&timer_base->tcrr);
+ lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
timestamp = 0; /* start "advancing" time stamp from 0 */
}
ulong get_timer_masked(void)
{
- ulong now = readl(&timer_base->tcrr); /* current tick value */
+ /* current tick value */
+ ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
if (now >= lastinc) /* normal mode (non roll) */
/* move stamp fordward with absoulte diff ticks */
timestamp += (now - lastinc);
else /* we have rollover of incrementer */
- timestamp += (0xFFFFFFFF - lastinc) + now;
+ timestamp += ((0xFFFFFFFF / (TIMER_CLOCK / CONFIG_SYS_HZ))
+ - lastinc) + now;
lastinc = now;
return timestamp;
}
-/* waits specified delay value and resets timestamp */
-void udelay_masked(unsigned long usec)
-{
- ulong tmo;
- ulong endtime;
- signed long diff;
-
- /* if "big" number, spread normalization to seconds */
- if (usec >= 1000) {
- /* start to normalize for usec to ticks per sec */
- tmo = usec / 1000;
- /* find number of "ticks" to wait to achieve target */
- tmo *= CONFIG_SYS_HZ;
- tmo /= 1000; /* finish normalize. */
- } else { /* else small number, */
- /* don't kill it prior to HZ multiply */
- tmo = usec * CONFIG_SYS_HZ;
- tmo /= (1000 * 1000);
- }
- endtime = get_timer_masked() + tmo;
-
- do {
- ulong now = get_timer_masked();
- diff = endtime - now;
- } while (diff >= 0);
-}
-
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
@@ -291,7 +275,5 @@ unsigned long long get_ticks(void)
*/
ulong get_tbclk(void)
{
- ulong tbclk;
- tbclk = CONFIG_SYS_HZ;
- return tbclk;
+ return CONFIG_SYS_HZ;
}
Index: u-boot-main/include/configs/omap3_beagle.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_beagle.h
+++ u-boot-main/include/configs/omap3_beagle.h
@@ -220,14 +220,13 @@
/* load address */
/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
*/
-#define V_PVT 7
-
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_PVT 2 /* Divisor: 2^(PVT+1) => 8 */
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Stack sizes
Index: u-boot-main/include/configs/omap3_evm.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_evm.h
+++ u-boot-main/include/configs/omap3_evm.h
@@ -216,17 +216,16 @@
/* in Hz */
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
- /* address */
+ /* address */
/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
*/
-#define V_PVT 7
-
-#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
-#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PVT 2 /* Divisor: 2^(PVT+1) => 8 */
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Stack sizes
Index: u-boot-main/include/configs/omap3_overo.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_overo.h
+++ u-boot-main/include/configs/omap3_overo.h
@@ -213,14 +213,13 @@
/* address */
/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
*/
-#define V_PVT 7
-
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_PVT 2 /* Divisor: 2^(PVT+1) => 8 */
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Stack sizes
Index: u-boot-main/include/configs/omap3_pandora.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_pandora.h
+++ u-boot-main/include/configs/omap3_pandora.h
@@ -215,14 +215,13 @@
/* address */
/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
*/
-#define V_PVT 7
-
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_PVT 2 /* Divisor: 2^(PVT+1) => 8 */
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Stack sizes
Index: u-boot-main/include/configs/omap3_zoom1.h
===================================================================
--- u-boot-main.orig/include/configs/omap3_zoom1.h
+++ u-boot-main/include/configs/omap3_zoom1.h
@@ -222,14 +222,13 @@
/* load address */
/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
*/
-#define V_PVT 7
-
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
-#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
-#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
+#define CONFIG_SYS_PVT 2 /* Divisor: 2^(PVT+1) => 8 */
+#define CONFIG_SYS_HZ 1000
/*-----------------------------------------------------------------------
* Stack sizes
More information about the U-Boot
mailing list