[U-Boot] Pull request u-boot-blackfin.git
Wolfgang Denk
wd at denx.de
Wed Mar 25 22:43:52 CET 2009
Dear Mike Frysinger,
In message <1237944560-13637-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit 4ace2823bc1fcc96874069a9a8c0821ff4f95f5d:
> Wolfgang Denk (1):
> Merge branch 'master' of git://git.denx.de/u-boot-avr32
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-blackfin.git master
>
> Mike Frysinger (31):
> Blackfin: update anomaly lists
> Blackfin: fix SWRST/SYSCR register sizes
> Blackfin: unify net-related init code
> Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...)
> Blackfin: fix jtag console tstc
> Blackfin: mark bfin_reset static
> Blackfin: update lockbox api according to latest documentation
> Blackfin: safely flush data caches when in writeback mode
> Blackfin: print out Flash: before checking it
> Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX
> Blackfin: unify duplicate CPU port definitions
> Blackfin: drop SPORT_TX read helper macros
> Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits
> Blackfin: simplify symbol_lookup() a bit
> Blackfin: kill off LDR jump block
> Blackfin: handle reboot anomaly 432
> Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers
> Blackfin: do not program voltage regulator on parts that do not have one
> Blackfin: put memory into self-refresh before/after programming clocks
> Blackfin: unify common ADI board settings
> Blackfin: bf533-stamp: rewrite startup LED notifications
> Blackfin: bf533-stamp: bump up default clocks
> Blackfin: add clkin_hz= to default kernel command line for ADI boards
> Blackfin: bf537-stamp: rewrite MAC-in-flash handling
> Blackfin: bf537-stamp: bump default SCLK up to 125MHz
> Blackfin: bf537-stamp: increase monitor size
> Blackfin: add hack for crappy m25p80
> Blackfin: add support for SST SPI flashes
> Blackfin: overhaul SPI flash handling to speed things up
> Blackfin: add support for S25FL128 parts
> Blackfin: bf537-stamp: split post code out into dedicated post.c
>
> Sonic Zhang (1):
> Blackfin: spi: there is no PORTJ_FER MMR on BF537
>
> blackfin_config.mk | 1 +
> board/bf533-ezkit/u-boot.lds.S | 5 +-
> board/bf533-stamp/bf533-stamp.c | 62 ++-
> board/bf533-stamp/u-boot.lds.S | 5 +-
> board/bf537-stamp/Makefile | 3 +-
> board/bf537-stamp/bf537-stamp.c | 313 +++-----------
> board/bf537-stamp/post-memory.c | 3 -
> board/bf537-stamp/post.c | 244 +++++++++++
> board/bf537-stamp/spi_flash.c | 297 +++++++++++---
> board/bf537-stamp/u-boot.lds.S | 5 +-
> board/bf561-ezkit/u-boot.lds.S | 5 +-
> cpu/blackfin/cpu.c | 8 +-
> cpu/blackfin/initcode.c | 255 +++++++++---
> cpu/blackfin/jtag-console.c | 15 +-
> cpu/blackfin/reset.c | 2 +-
> cpu/blackfin/start.S | 83 +++--
> cpu/blackfin/traps.c | 2 +-
> drivers/spi/bfin_spi.c | 8 +-
> include/asm-blackfin/blackfin-config-pre.h | 6 -
> .../mach-bf527/ADSP-EDN-BF52x-extended_cdef.h | 8 +-
> include/asm-blackfin/mach-bf527/anomaly.h | 6 +-
> include/asm-blackfin/mach-bf527/ports.h | 75 +---
> include/asm-blackfin/mach-bf533/anomaly.h | 7 +-
> include/asm-blackfin/mach-bf533/ports.h | 18 +-
> .../mach-bf537/ADSP-EDN-BF534-extended_cdef.h | 8 +-
> include/asm-blackfin/mach-bf537/anomaly.h | 7 +-
> include/asm-blackfin/mach-bf537/ports.h | 56 +---
> .../mach-bf548/ADSP-EDN-BF542-extended_cdef.h | 3 -
> .../mach-bf548/ADSP-EDN-BF544-extended_cdef.h | 3 -
> .../mach-bf548/ADSP-EDN-BF547-extended_cdef.h | 4 -
> .../mach-bf548/ADSP-EDN-BF548-extended_cdef.h | 4 -
> .../mach-bf548/ADSP-EDN-BF549-extended_cdef.h | 4 -
> include/asm-blackfin/mach-bf548/anomaly.h | 23 +-
> include/asm-blackfin/mach-bf548/ports.h | 189 +--------
> include/asm-blackfin/mach-bf561/BF561_cdef.h | 12 +-
> include/asm-blackfin/mach-bf561/anomaly.h | 7 +-
> include/asm-blackfin/mach-bf561/def_local.h | 2 +
> include/asm-blackfin/mach-bf561/ports.h | 44 ++
> .../mach-common/ADSP-EDN-DUAL-CORE-extended_cdef.h | 2 -
> .../mach-common/ADSP-EDN-extended_cdef.h | 8 +-
> include/asm-blackfin/mach-common/bits/lockbox.h | 70 ++--
> include/asm-blackfin/mach-common/bits/ports-a.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-b.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-c.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-d.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-e.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-f.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-g.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-h.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-i.h | 25 ++
> include/asm-blackfin/mach-common/bits/ports-j.h | 25 ++
> include/asm-blackfin/net.h | 28 ++
> include/configs/bf533-ezkit.h | 286 +++++--------
> include/configs/bf533-stamp.h | 457 +++++++-------------
> include/configs/bf537-stamp.h | 443 +++++++------------
> include/configs/bf561-ezkit.h | 295 +++++--------
> include/configs/bfin_adi_common.h | 199 +++++++++
> lib_blackfin/board.c | 32 +-
> lib_blackfin/cache.c | 42 ++
> 59 files changed, 2107 insertions(+), 1807 deletions(-)
> create mode 100644 board/bf537-stamp/post.c
> create mode 100644 include/asm-blackfin/mach-bf561/ports.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-a.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-b.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-c.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-d.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-e.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-f.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-g.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-h.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-i.h
> create mode 100644 include/asm-blackfin/mach-common/bits/ports-j.h
> create mode 100644 include/asm-blackfin/net.h
> create mode 100644 include/configs/bfin_adi_common.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A failure will not appear until a unit has passed final inspection.
More information about the U-Boot
mailing list