[U-Boot] Build breaks on some OMAP3 configs

[Premi, Sanjeev]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Gadiyar, Anand
> Sent: Friday, October 30, 2009 10:25 PM
> To: u-boot at lists.denx.de
> Subject: Re: [U-Boot] Build breaks on some OMAP3 configs
> 
> > Hi,
> > 
> > I was trying to build u-boot for omap3_3430sdp and
> > omap3_zoom2, and the build fails with the error below.
> > 
> > I'm on commit f2b4bc0 from the master branch. I'm
> > using CodeSourcery's 2008q3 toolchain.
> > The commands I ran were:
> > 
> > make CROSS_COMPILE=arm-none-linux-gnueabi- 
> > omap3_3430sdp_config; make CROSS_COMPILE=arm-none-linux-gnueabi-
> > 
> > Any ideas what I'm doing wrong?
> > 
> > make -C examples/standalone all
> > make[1]: Entering directory 
> `/data/git/denx-uboot/u-boot/examples/standalone'
> > arm-none-linux-gnueabi-gcc -g  -Os   -fno-common -ffixed-r8 
> -msoft-float   -D__KERNEL__ -DTEXT_BASE=0x80e80000 
> -I/data/git/denx-uboot/u-boot/include -fno-builtin 
> -ffreestanding -nostdinc -isystem 
> /data/arm-2008q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/i
> nclude -pipe  -DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux 
> -mno-thumb-interwork -march=armv5 -Wall -Wstrict-prototypes 
> -fno-stack-protector -g  -Os   -fno-common -ffixed-r8 
> -msoft-float   -D__KERNEL__ -DTEXT_BASE=0x80e80000 
> -I/data/git/denx-uboot/u-boot/include -fno-builtin 
> -ffreestanding -nostdinc -isystem 
> /data/arm-2008q3/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.2/i
> nclude -pipe  -DCONFIG_ARM -D__ARM__ -marm  -mabi=aapcs-linux 
> -mno-thumb-interwork -march=armv5 -I.. -Bstatic -T u-boot.lds 
>  -Ttext 0x80e80000     -o .c
> > arm-none-linux-gnueabi-gcc: no input files
> > make[1]: *** [.c] Error 1
> > make[1]: Leaving directory 
> `/data/git/denx-uboot/u-boot/examples/standalone'
> > make: *** [examples/standalone] Error 2
> 
> 
> I took a look at examples/standalone/Makefile:
> 
> The patch below gets things going again. So looks like something
> clobbered $(ELF-y). Any ideas what it could be?
> 
> Thanks in advance,
> Anand
> 
> diff --git a/examples/standalone/Makefile 
> b/examples/standalone/Makefile
> index 5e2f2bc..73b19e9 100644
> --- a/examples/standalone/Makefile
> +++ b/examples/standalone/Makefile
> @@ -39,6 +39,7 @@ ELF-ppc                          += sched
>  ELF-oxc                          += eepro100_eeprom
>  
>  ELF := $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU))
> +ELF := hello_world

[sp] This will break the earlier definition for ELF.
     I am submitting the right fix in few mins..

~sanjeev

>  SREC = $(addsuffix .srec,$(ELF))
>  BIN  = $(addsuffix .bin,$(ELF))
>  
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
>