[U-Boot] [PATCH v2 1/3] ppc/P1_P2_RDB: NAND Boot Support

[Kumar Gala]

On Oct 8, 2009, at 3:03 AM, Dipen Dudhat wrote:

> NAND Boot support for P1 and P2 series RDB platforms.
>
> This patch is derived from latest NAND Boot support on MPC8536DS by  
> Mingkai Hu.
>
> Signed-off-by: Dipen Dudhat <dipen.dudhat at freescale.com>
> ---
> - Applies to http://git.denx.de/u-boot.git
> - Changes from v1: Integrated kumar's comments
> MAKEALL                                        |    4 +
> Makefile                                       |    6 +-
> board/freescale/p1_p2_rdb/config.mk            |    7 ++
> board/freescale/p1_p2_rdb/tlb.c                |   10 ++
> include/configs/P1_P2_RDB.h                    |   72 ++++++++++++--
> nand_spl/board/freescale/p1_p2_rdb/Makefile    |  127 +++++++++++++++ 
> +++++++++
> nand_spl/board/freescale/p1_p2_rdb/nand_boot.c |   97 +++++++++++++++ 
> +++
> 7 files changed, 315 insertions(+), 8 deletions(-)
> create mode 100644 nand_spl/board/freescale/p1_p2_rdb/Makefile
> create mode 100644 nand_spl/board/freescale/p1_p2_rdb/nand_boot.c

applied to 85xx

- k