[U-Boot] Regarding Reset command.

[Thirumalai]

Hi kumar,
            We are having QUAD MPC8640D based System on which all the 
processors are sharing the same boot code which is residing on the 32bit 
boot flash memory. i don't find any problem with this. But i just want to 
know whether it will create any problem. My configuration is Processor 1 
will boot first and it will kick the P2,P3,P4 from Processor 1 with help of 
Glue logic.
            One more clarification regarding fsl_pci_config_unlock() 
function. Where can we use this function ? On the datasheet it was mentioned 
that the Endpoint should use this bit to allow the inbound configuration 
accesses of endpoint.

Regards,
T.