[U-Boot] ARM pull request v3

Tom Rix tom at bumblecow.com
Tue Oct 13 14:55:10 CEST 2009


Wolfgang,

I have cleaned up the commits to arm/master-sync.

The cleanup is from doing a
git rev-list --reverse master..arm/master
Then working back from my notes to take only the commits
were either misc arm or other arm pull requests.
These were cherry picked on top of the current u-boot/master.

I ran the MAKEALL regression and the results look like
what I posted on Sunday.

That said, it would be a good idea to wait a bit for others to
review this list and pick up on anything that I missed.

I will be offline for about 10hrs and will fix any problems
then.

Tom

The following changes since commit 14abfe361b3ed23b02f564e2f5d663e158cd5799:
   Wolfgang Denk (1):
         Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

   git://git.denx.de/u-boot-arm master-sync

Daniel Gorsulowski (1):
       at91: Update MEESC board support

Dirk Behme (1):
       OMAP3 MMC: Fix warning dereferencing type-punned pointer

Olof Johansson (3):
       OMAP3: Clean up whitespace in mux configs
       SMC911X: Add chip auto detection
       TI: OMAP3: Overo Tobi ethernet support

Prafulla Wadaskar (2):
       Kirkwood: rd6281a: Add kwbimage build support
       Kirkwood: mv88f6281gtw_ge: Add kwbimage build support

Sandeep Paulraj (9):
       TI DaVinci: Remove references to SZ_xx
       TI DaVinci: DM6446: Fix Compilation error in NAND mode
       TI DaVinci: DM646x: Initial Support for DM646x SOC
       TI DaVinci: DM355: Config Cleanup and Update
       TI DaVinci DM365: Removing header file which does not exist
       TI: DaVinci DM365: Minor config cleanup
       TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
       TI: DaVinci: GPIO header file and definitions
       TI: DaVinci DM365: Enabling network Support on DM365 EVM

Simon Kagstrom (2):
       Support for the OpenRD base board
       arm: Correct build with CONFIG_SYS_HUSH_PARSER set

Tom Rix (4):
       OMAP3 Move cache routine to cache.S
       Add support for Eukrea CPUAT91 SBC
       Add support for Eukrea CPU9260/CPU9G20 SBC
       TI OMAP3 Use arm init sequence to initialize i2c

  MAINTAINERS                                |   10 +
  MAKEALL                                    |    6 +-
  Makefile                                   |   17 +
  board/Marvell/mv88f6281gtw_ge/config.mk    |    3 +
  board/Marvell/mv88f6281gtw_ge/kwbimage.cfg |  165 +++++++
  board/Marvell/openrd_base/Makefile         |   56 +++
  board/Marvell/openrd_base/config.mk        |   33 ++
  board/Marvell/openrd_base/kwbimage.cfg     |  168 +++++++
  board/Marvell/openrd_base/openrd_base.c    |  160 +++++++
  board/Marvell/openrd_base/openrd_base.h    |   46 ++
  board/Marvell/rd6281a/config.mk            |    3 +
  board/Marvell/rd6281a/kwbimage.cfg         |  167 +++++++
  board/davinci/dm365evm/dm365evm.c          |   44 ++-
  board/esd/meesc/meesc.c                    |   65 +++-
  board/eukrea/cpu9260/Makefile              |   59 +++
  board/eukrea/cpu9260/config.mk             |    1 +
  board/eukrea/cpu9260/cpu9260.c             |  220 +++++++++
  board/eukrea/cpu9260/led.c                 |  153 +++++++
  board/eukrea/cpuat91/Makefile              |   50 +++
  board/eukrea/cpuat91/config.mk             |    1 +
  board/eukrea/cpuat91/cpuat91.c             |   81 ++++
  board/logicpd/zoom1/zoom1.h                |  164 ++++----
  board/logicpd/zoom2/zoom2.h                |  188 ++++----
  board/overo/overo.c                        |   59 +++
  board/overo/overo.h                        |  645 
++++++++++++++--------------
  board/pandora/pandora.h                    |  662 
++++++++++++++--------------
  board/ti/beagle/beagle.h                   |  640 
++++++++++++++--------------
  board/ti/evm/evm.h                         |  662 
++++++++++++++--------------
  board/timll/devkit8000/devkit8000.h        |  628 
+++++++++++++-------------
  cpu/arm920t/at91rm9200/Makefile            |    5 +-
  cpu/arm920t/at91rm9200/ks8721.c            |  249 +++++++++++
  cpu/arm926ejs/at91/lowlevel_init.S         |    3 +-
  cpu/arm926ejs/davinci/Makefile             |    1 +
  cpu/arm926ejs/davinci/dm646x.c             |   41 ++
  cpu/arm926ejs/kirkwood/cpu.c               |    1 +
  cpu/arm_cortexa8/cpu.c                     |    2 +-
  cpu/arm_cortexa8/omap3/Makefile            |    2 +-
  cpu/arm_cortexa8/omap3/board.c             |    2 +-
  cpu/arm_cortexa8/omap3/cache.S             |  191 ++++++++
  cpu/arm_cortexa8/omap3/cache.c             |   95 ----
  cpu/arm_cortexa8/start.S                   |   85 ----
  drivers/mmc/omap3_mmc.c                    |   48 +--
  drivers/net/smc911x.c                      |   14 +-
  drivers/net/smc911x.h                      |    7 +-
  include/asm-arm/arch-davinci/emac_defs.h   |    4 +-
  include/asm-arm/arch-davinci/gpio_defs.h   |   53 +++
  include/asm-arm/arch-davinci/hardware.h    |   11 +
  include/asm-arm/arch-davinci/nand_defs.h   |    2 +-
  include/asm-arm/arch-omap3/mmc.h           |    7 +
  include/asm-arm/arch-omap3/omap3.h         |    2 +
  include/asm-arm/arch-omap3/sys_proto.h     |    2 +-
  include/configs/cpu9260.h                  |  453 +++++++++++++++++++
  include/configs/cpuat91.h                  |  228 ++++++++++
  include/configs/davinci_dm355evm.h         |   26 +-
  include/configs/davinci_dm365evm.h         |   11 +-
  include/configs/davinci_dvevm.h            |    6 +-
  include/configs/davinci_schmoogie.h        |    3 +-
  include/configs/davinci_sffsdr.h           |    3 +-
  include/configs/davinci_sonata.h           |    3 +-
  include/configs/devkit8000.h               |    1 +
  include/configs/meesc.h                    |   25 +-
  include/configs/omap3_beagle.h             |    1 +
  include/configs/omap3_evm.h                |    1 +
  include/configs/omap3_overo.h              |   18 +-
  include/configs/omap3_pandora.h            |    1 +
  include/configs/omap3_zoom1.h              |    1 +
  include/configs/omap3_zoom2.h              |    1 +
  include/configs/openrd_base.h              |  220 +++++++++
  include/ks8721.h                           |   78 ++++
  69 files changed, 4988 insertions(+), 2075 deletions(-)
  create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
  create mode 100644 board/Marvell/openrd_base/Makefile
  create mode 100644 board/Marvell/openrd_base/config.mk
  create mode 100644 board/Marvell/openrd_base/kwbimage.cfg
  create mode 100644 board/Marvell/openrd_base/openrd_base.c
  create mode 100644 board/Marvell/openrd_base/openrd_base.h
  create mode 100644 board/Marvell/rd6281a/kwbimage.cfg
  create mode 100644 board/eukrea/cpu9260/Makefile
  create mode 100644 board/eukrea/cpu9260/config.mk
  create mode 100644 board/eukrea/cpu9260/cpu9260.c
  create mode 100644 board/eukrea/cpu9260/led.c
  create mode 100644 board/eukrea/cpuat91/Makefile
  create mode 100644 board/eukrea/cpuat91/config.mk
  create mode 100644 board/eukrea/cpuat91/cpuat91.c
  create mode 100644 cpu/arm920t/at91rm9200/ks8721.c
  create mode 100644 cpu/arm926ejs/davinci/dm646x.c
  create mode 100644 cpu/arm_cortexa8/omap3/cache.S
  delete mode 100644 cpu/arm_cortexa8/omap3/cache.c
  create mode 100644 include/asm-arm/arch-davinci/gpio_defs.h
  create mode 100644 include/configs/cpu9260.h
  create mode 100644 include/configs/cpuat91.h
  create mode 100644 include/configs/openrd_base.h
  create mode 100644 include/ks8721.h


More information about the U-Boot mailing list