[U-Boot] Relocating u-boot console

[Mike Frysinger]

On Wednesday 14 October 2009 09:47:27 Matthias Weißer wrote:
> Is it possible to relocate the u-boot console depending on the state of
> some GPIO pins (e.g. in board_init or board_late_init)? Currently I have
> the following serial configuration for my board:
> 
> #define CONFIG_SERIAL_MULTI
> #define CONFIG_SYS_NS16550
> #define CONFIG_SYS_NS16550_SERIAL
> #define CONFIG_SYS_NS16550_REG_SIZE		(-4)
> #define CONFIG_SYS_NS16550_CLK			CONFIG_JADE_IOCLK
> #define CONFIG_SYS_NS16550_COM1			0xfffe1000
> #define CONFIG_SYS_NS16550_COM2			0xfff50000
> #define CONFIG_SYS_NS16550_COM3			0xfff51000
> #define CONFIG_SYS_NS16550_COM4			0xfff43000
> #define CONFIG_CONS_INDEX	4
> 
> This results in a console on COM4. Now I would like to have the console
> on COM1 under some circumstances for maintanance reasons.

if your devices fit into the stdio framework, simply change the 
std{err,in,out} env vars in your board code
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20091014/d53f5e76/attachment.pgp