[U-Boot] MPC8541 SPI through CPM

[Alemao]

Hi all,

Im trying to use SPI through CPM in my MPC8541 board.

I haven't see support for this combination even in the newest U-Boot.
So I followed MPC8555E Reference Manual, but I'm having some problems:

- I can see the clock and chip select (using a osciloscope) but data
out (MOSI) is always zero.

- If I use chip select from CPM (SPISEL, dedicated pin), instead a
simple GPIO, I got a "Multiple Master Error", as if it was reading the
pin.


Any help is welcome, thanks!


--
Alemao