September 2009 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Sep 1 03:41:42 CEST 2009
Ending: Wed Sep 30 23:51:21 CEST 2009
Messages: 2148

• [U-Boot] [PATCH v6 2/2] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
  • [U-Boot] [PATCH v6 2/2] arm: A320: Add support for Faraday A320 evaluation board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM preprocessor error generating assembly dependencies   Dirk Behme
  • [U-Boot] ARM preprocessor error generating assembly dependencies   Wolfgang Denk
    • [U-Boot] ARM preprocessor error generating assembly dependencies   Dirk Behme
      • [U-Boot] ARM preprocessor error generating assembly dependencies   Wolfgang Denk
      • [U-Boot] ARM preprocessor error generating assembly dependencies   Dirk Behme
  • [U-Boot] [PATCH] add Matrix Vision specific dir for common code.   André Schwarz
    • [U-Boot] [PATCH] add Matrix Vision specific dir for common code.   Wolfgang Denk
  • [U-Boot] [PATCH] Add common code dir for Matrix Vision boards.   André Schwarz
    • [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Albin Tonnerre
    • [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Sami Kantoluoto
    • [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Sami Kantoluoto
    • [U-Boot] [PATCH] AT91: Add SD/MMC controller support   Albin Tonnerre
• [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
  • [U-Boot] how to enable various command support in u-boot-1.3.4?   Wolfgang Denk
    • [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
      • [U-Boot] how to enable various command support in u-boot-1.3.4?   Wolfgang Denk
      • [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
      • [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
      • [U-Boot] how to enable various command support in u-boot-1.3.4?   Wolfgang Denk
      • [U-Boot] how to enable various command support in u-boot-1.3.4?   sunr2007
  • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
    • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Stefan Roese
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
    • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Wolfgang Denk
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
      • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Thiago A. Corrêa
  • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
    • [U-Boot] [PATCH] at91sam9260/afeb9260: Fix SPI initialization   Albin Tonnerre
    • [U-Boot] [PATCH] at91sam9260/afeb9260: Fix SPI initialization   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
• [U-Boot] [PATCH] Support for Micrel/Kendin KS899xM managed switches.   Sami Kantoluoto
  • [U-Boot] [PATCH][v1] ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk   Dipen Dudhat
  • [U-Boot] [PATCH][v1] ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk   Kumar Gala
  • [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree for P1 & P2 RDB platforms   Dipen Dudhat
  • [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree for P1 & P2 RDB platforms   Kumar Gala
• [U-Boot] Obtaining board specific phy diagnostics   Matthew Lear
  • [U-Boot] Obtaining board specific phy diagnostics   Matthew Lear
• [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
  • [U-Boot] Is there any full story about how to take advantage FDT function ?   Jerry Van Baren
    • [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
      • [U-Boot] Is there any full story about how to take advantage FDT function ?   Scott Wood
      • [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
      • [U-Boot] Is there any full story about how to take advantage FDT function ?   Scott Wood
      • [U-Boot] Is there any full story about how to take advantage FDT function ?   Gao Ya'nan
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Sami Kantoluoto
• [U-Boot] Large Block USB Flash Drive Problem   Barnes, Clifton A.
  • [U-Boot] Large Block USB Flash Drive Problem   Remy Bohmer
  • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Haavard Skinnemoen
    • [U-Boot] [PATCH] atngw100: Use virtual address in CONFIG_ENV_ADDR   Mark Jackson
      • [U-Boot] Virtual addresses, u-boot, and the MMU   J. William Campbell
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Wolfgang Denk
      • [U-Boot] Virtual addresses, u-boot, and the MMU   J. William Campbell
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Wolfgang Denk
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Becky Bruce
      • [U-Boot] Virtual addresses, u-boot, and the MMU   J. William Campbell
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Andrew Dyer
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Mark Jackson
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Haavard Skinnemoen
      • [U-Boot] Virtual addresses, u-boot, and the MMU   Haavard Skinnemoen
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   John Rigby
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Scott Wood
  • [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Paulraj, Sandeep
    • [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   John Rigby
    • [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Scott Wood
      • [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Matt Waddel
• [U-Boot] API License Terms   Daniel Sherwood
  • [U-Boot] API License Terms   Wolfgang Denk
    • [U-Boot] API License Terms   Rafal Jaworowski
    • [U-Boot] [PATCH 1/2] ppc: Remove -fno-strict-aliasing   Kumar Gala
    • [U-Boot] [PATCH 2/2] arm: Remove -fno-strict-aliasing   Kumar Gala
    • [U-Boot] [PATCH 2/2] arm: Remove -fno-strict-aliasing   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] ppc: Remove -fno-strict-aliasing   Wolfgang Denk
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   John Rigby
• [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Anton Vorontsov
  • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Anton Vorontsov
      • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Albin Tonnerre
      • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Anton Vorontsov
      • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Mike Frysinger
      • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Wolfgang Denk
      • [U-Boot] [PATCH v2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
      • [U-Boot] [PATCH v2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Timur Tabi
      • [U-Boot] [PATCH v2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Kumar Gala
  • [U-Boot] [PATCH 1/2] Move uninitialized_var() macro from ubi_uboot.h to compiler.h   Wolfgang Denk
• [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Kumar Gala
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
  • [U-Boot] invalid core multipliers?   Kári Davíðsson
  • [U-Boot] invalid core multipliers?   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Timur Tabi
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warningп   Anton Vorontsov
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Anton Vorontsov
      • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] fsl: sys_eeprom: Fix 'may be used uninitialized' warning   Timur Tabi
  • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
  • [U-Boot] [PATCH v3] arm: Kirkwood: add SYSRSTn Duration Counter Support   Prafulla Wadaskar
• [U-Boot] I2c imd/imw for a digital potentiometer?   Brian Hutchinson
  • [U-Boot] I2c imd/imw for a digital potentiometer?   Jerry Van Baren
    • [U-Boot] I2c imd/imw for a digital potentiometer?   Brian Hutchinson
  • [U-Boot] I2c imd/imw for a digital potentiometer?   Andrew Dyer
• [U-Boot] API License Terms   Daniel Sherwood
• [U-Boot] [PATCH 2/2] MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST   Scott Wood
• [U-Boot] [PATCH] imx27lite: add support for imx27lite board from LogicPD   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] arm: Kirkwood: add SYSRSTn Duration Counter Support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v8] Support for the Calao TNY-A9260/TNY-A9G20 boards   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] ppc/8xxx: relocate cpu pointer in global data   Kumar Gala
  • [U-Boot] [PATCH] ppc/8xxx: relocate cpu pointer in global data   Kumar Gala
• [U-Boot] Does u-boot support nand flash boot   雷 高
  • [U-Boot] [PATCH v6 1/2 resend] arm: A320: driver for FTRTC010 real time clock   ratbert.chuang at gmail.com
  • [U-Boot] [PATCH v6 1/2 resend] arm: A320: driver for FTRTC010 real time clock   Po-Yu Chuang
  • [U-Boot] [PATCH v6 2/2 resend] arm: A320: Add support for Faraday A320 evaluation board   ratbert.chuang at gmail.com
  • [U-Boot] [PATCH v6 2/2 resend] arm: A320: Add support for Faraday A320 evaluation board   Po-Yu Chuang
  • [U-Boot] [PATCH] ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist   Kumar Gala
  • [U-Boot] [PATCH] ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist   Kumar Gala
  • [U-Boot] [PATCH][v1] ppc/85xx,86xx: Handling Unknown SOC version   Poonam Aggrwal
  • [U-Boot] [PATCH][v1] ppc/85xx, 86xx: Handling Unknown SOC version   Wolfgang Denk
  • [U-Boot] [PATCH][v1] ppc/85xx, 86xx: Handling Unknown SOC version   Aggrwal Poonam-B10812
  • [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree   Dipen Dudhat
  • [U-Boot] [PATCH][v1] ppc/85xx: Fix up eSDHC controller clock frequency in the device tree   Kumar Gala
• [U-Boot] Xilinx LL temac update   Michal Simek
  • [U-Boot] [PATCH][v2] ppc/85xx,86xx: Handling Unknown SOC version   Poonam Aggrwal
  • [U-Boot] [PATCH][v2] ppc/85xx, 86xx: Handling Unknown SOC version   Kumar Gala
  • [U-Boot] [PATCH] net: add random_port() prototype   Mike Frysinger
  • [U-Boot] [PATCH] net: add random_port() prototype   Ben Warren
  • [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Kumar Gala
  • [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Kumar Gala
  • [U-Boot] [PATCH] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH v2] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Kumar Gala
  • [U-Boot] [PATCH v3] TQM85xx: enable partition support, sort commands   Wolfgang Denk
  • [U-Boot] [PATCH] cmd_mtdparts.c: fix compiler warning in debug code   Wolfgang Denk
  • [U-Boot] [PATCH] cmd_mtdparts.c: fix compiler warning in debug code   Wolfgang Denk
• [U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image   Kyungmin Park
  • [U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image   Scott Wood
    • [U-Boot] [PATCH] [OneNAND] Board can override OneNAND IPL image   Kyungmin Park
    • [U-Boot] [PATCH 0/8] Blackfin updates for 2009.11   Mike Frysinger
    • [U-Boot] [PATCH 1/8] Blackfin: use +(filesize) to make sure we are only doing what is necessary   Mike Frysinger
    • [U-Boot] [PATCH 2/8] Blackfin: bf537-stamp: comment CF-Flash Card Support better   Mike Frysinger
    • [U-Boot] [PATCH 3/8] Blackfin: enable more network commands for ADI dev boards   Mike Frysinger
    • [U-Boot] [PATCH 4/8] Blackfin: change global data register from P5 to P3   Mike Frysinger
    • [U-Boot] [PATCH 5/8] Blackfin: cm-bf537u: new board port   Mike Frysinger
    • [U-Boot] [PATCH 5/8 v2] Blackfin: cm-bf537u: new board port   Mike Frysinger
    • [U-Boot] [PATCH 6/8] Blackfin: fix debug printf modifiers   Mike Frysinger
    • [U-Boot] [PATCH 7/8] Blackfin: increase default console size   Mike Frysinger
    • [U-Boot] [PATCH 8/8] Blackfin: use scratch pad for exception stack   Mike Frysinger
    • [U-Boot] [PATCH 9/8] Blackfin: enable 64bit printf for nand   Mike Frysinger
    • [U-Boot] [PATCH 10/8] Blackfin: cm-bf548: fix device->stdio_dev fallout   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Mike Frysinger
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Remy Bohmer
  • [U-Boot] [PATCH] usb: musb: add support for Blackfin MUSB   Mike Frysinger
    • [U-Boot] [PATCH 0/2] License cleanup: get serious   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] License cleanup: remove unintended "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] License cleanup: remove unintended "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Dirk Behme
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Dirk Behme
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Stefan Roese
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Roland Dreier
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Stefan Roese
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Roland Dreier
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Kumar Gala
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Kumar Gala
    • [U-Boot] mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice   Anton Vorontsov
    • [U-Boot] mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Kumar Gala
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Anton Vorontsov
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Mike Frysinger
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Michal Simek
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Michal Simek
    • [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Stephen Neuendorffer
• [U-Boot] lib_generic/zlib.c breaks when DEBUG are defined   Gao Ya'nan
  • [U-Boot] lib_generic/zlib.c breaks when DEBUG are defined   Wolfgang Denk
    • [U-Boot] lib_generic/zlib.c breaks when DEBUG are defined   Gao Ya'nan
• [U-Boot] [PATCH 2/2] License cleanup: remove all files with "All Rights Reserved" notices.   Wolfgang Denk
  • [U-Boot] [PATCH] ppc/85xx: Cleanup makefile and related optional files   Kumar Gala
  • [U-Boot] [PATCH] ppc/85xx: Cleanup makefile and related optional files   Kumar Gala
  • [U-Boot] [PATCH][v1] ppc/85x/86xxx: Device tree fixup for number of cores   Poonam Aggrwal
  • [U-Boot] [PATCH][v1] ppc/85x/86xxx: Device tree fixup for number of cores   Kumar Gala
  • [U-Boot] [PATCH] amcc-common.h: Use filenames from environment variables for update procedure.   Detlev Zundel
  • [U-Boot] [PATCH] amcc-common.h: Use filenames from environment variables for update procedure.   Wolfgang Denk
  • [U-Boot] [PATCH] amcc-common.h: Use filenames from environment variables for update procedure.   Stefan Roese
• [U-Boot] HP Jornada 720 flashrom   Kristoffer Ericson
  • [U-Boot] HP Jornada 720 flashrom   Wolfgang Denk
    • [U-Boot] HP Jornada 720 flashrom   Kristoffer Ericson
      • [U-Boot] HP Jornada 720 flashrom   Wolfgang Denk
      • [U-Boot] [PATCH] ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host   Kumar Gala
      • [U-Boot] [PATCH] ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host   Kumar Gala
  • [U-Boot] [PATCH] mxc_nand: Remove Freescale's "All Rights Reserved."   Scott Wood
    • [U-Boot] [PATCH] mxc_nand: Remove Freescale's "All Rights Reserved."   Wolfgang Denk
• [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Scott Wood
  • [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Paulraj, Sandeep
    • [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Scott Wood
      • [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Paulraj, Sandeep
      • [U-Boot] "All rights reserved" in drivers/mtd/nand/nand_util.c   Scott Wood
• [U-Boot] RAM burst mode problem   Mikhail Zaturenskiy
  • [U-Boot] RAM burst mode problem   Frank Svendsbøe
    • [U-Boot] RAM burst mode problem   Mikhail Zaturenskiy
      • [U-Boot] RAM burst mode problem   Frank Svendsbøe
• [U-Boot] GPL 'All Rights Reserved' Cleanup - AMD derived code   Graeme Russ
• [U-Boot] More davinci 4-bit hw ecc questions   John Rigby
  • [U-Boot] More davinci 4-bit hw ecc questions   John Rigby
    • [U-Boot] More davinci 4-bit hw ecc questions   David Brownell
      • [U-Boot] More davinci 4-bit hw ecc questions   John Rigby
      • [U-Boot] More davinci 4-bit hw ecc questions   David Brownell
• [U-Boot] [PATCH] Reset i2c slave devices during init on mpc5xxx cpus   Heiko Schocher
• [U-Boot] Interrupts in uboot with ARM AT91SAM9   Manuel Sahm
  • [U-Boot] [PATCH] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
  • [U-Boot] [PATCH] zlib: fix code when DEBUG is defined   Wolfgang Denk
• [U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)   Manuel Sahm
  • [U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] Antw: Re: Interrupts in uboot with ARM AT91SAM9 (V2)   Manuel Sahm
      • [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
      • [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Wolfgang Denk
      • [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
      • [U-Boot] [PATCH v2] zlib: fix code when DEBUG is defined   Wolfgang Denk
• [U-Boot] RTLWS11 / XUM-2009, 28-30 September, TU-Dresden - Call for Participation   Wolfgang Denk
  • [U-Boot] [PATCH v3] zlib: fix code when DEBUG is defined   Giuseppe CONDORELLI
  • [U-Boot] [PATCH v3] zlib: fix code when DEBUG is defined   Wolfgang Denk
  • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
  • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
    • [U-Boot] [PATCH v3 4/4] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Simon Kagstrom
• [U-Boot] HP Jornada flashrom doesnt boot   Kristoffer Ericson
• [U-Boot] [PATCH v2] Reset i2c slave devices during init on mpc5xxx cpus   Eric Millbrandt
  • [U-Boot] [PATCH v2] Reset i2c slave devices during init on mpc5xxx cpus   Heiko Schocher
    • [U-Boot] [PATCH] ppc/85xx: Add a simple function to search the TLB   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Add a simple function to search the TLB   Kumar Gala
    • [U-Boot] [PATCH 1/2 v2] 85xx: CONFIG_MP Boot Page Translation update   Kumar Gala
    • [U-Boot] [PATCH 1/2 v2] 85xx: CONFIG_MP Boot Page Translation update   Peter Tyser
• [U-Boot] Request to mailing list U-Boot-Users   Tien Guo
  • [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Kumar Gala
  • [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Peter Tyser
  • [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Kumar Gala
  • [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Kumar Gala
  • [U-Boot] [PATCH][v1] ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().   Poonam Aggrwal
  • [U-Boot] [PATCH][v1] ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().   Kumar Gala
  • [U-Boot] [PATCH][v1] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
    • [U-Boot] [PATCH][v1] ep8248: add support for device tree and secondary Ethernet interface.   Peter Tyser
      • [U-Boot] [PATCH][v1] ep8248: add support for device tree and secondary Ethernet interface.   Marcel ziswiler
      • [U-Boot] [PATCH][v2] ep8248: add support for device tree and secondary Ethernet interface.   Marcel ziswiler
      • [U-Boot] [PATCH][v2] ep8248: add support for device tree and secondary Ethernet interface.   Peter Tyser
      • [U-Boot] [PATCH][v2] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
• [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
  • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Heiko Schocher
    • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Peter Tyser
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Peter Tyser
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Timur Tabi
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Scott Wood
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
      • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Scott Wood
  • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
    • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Scott Wood
    • [U-Boot] Odd value for I2C_TIMEOUT in fsl_i2c.c   Wolfgang Denk
• [U-Boot] TEST   Wolfgang Denk
• [U-Boot] Newest Version U-boot   Marcos Cunha
  • [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
  • [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] push LOAD_ADDR out to arch mk files   Mike Frysinger
  • [U-Boot] [PATCH 1/3] push LOAD_ADDR out to arch mk files   Wolfgang Denk
  • [U-Boot] [PATCH 2/3] standalone: convert to kbuild style   Mike Frysinger
  • [U-Boot] [PATCH 2/3] standalone: convert to kbuild style   Wolfgang Denk
  • [U-Boot] [PATCH 2/3 v2] standalone: convert to kbuild style   Mike Frysinger
  • [U-Boot] [PATCH 2/3 v2] standalone: convert to kbuild style   Wolfgang Denk
  • [U-Boot] [PATCH 3/3] atmel_df_pow2: standalone to convert dataflashes to pow2   Mike Frysinger
  • [U-Boot] [PATCH 3/3] atmel_df_pow2: standalone to convert dataflashes to pow2   Wolfgang Denk
  • [U-Boot] [PATCH 3/3] atmel_df_pow2: standalone to convert dataflashes to pow2   Mike Frysinger
  • [U-Boot] U-boot environment on Sheevaplug   Prafulla Wadaskar
    • [U-Boot] U-boot environment on Sheevaplug   Simon Kagstrom
• [U-Boot] boot linux data aboot for S3C2440A   fluke56512
  • [U-Boot] boot linux data aboot for S3C2440A   abdoulaye Walsimou Gaye
    • [U-Boot] boot linux data aboot for S3C2440A   kevin.morfitt at fearnside-systems.co.uk
  • [U-Boot] boot linux data aboot for S3C2440A   Wolfgang Denk
• [U-Boot] [PATCH 1/4] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
  • [U-Boot] [PATCH 1/4] s5pc1xx: support Samsung s5pc1xx SoC   Wolfgang Denk
• [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Minkyu Kang
  • [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Wolfgang Denk
    • [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Kyungmin Park
      • [U-Boot] [PATCH 2/4] s5pc1xx: support onenand driver   Wolfgang Denk
• [U-Boot] [PATCH 3/4] s5pc1xx: support serial driver   Minkyu Kang
  • [U-Boot] [PATCH 3/4] s5pc1xx: support serial driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Minkyu Kang
  • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
    • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Kyungmin Park
      • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
    • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Minkyu Kang
      • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
  • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH 4/4] s5pc1xx: add support SMDKC100 board   Minkyu Kang
• [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
  • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
    • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Kyungmin Park
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Kyungmin Park
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Dirk Behme
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Minkyu Kang
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Tom
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Paulraj, Sandeep
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Wolfgang Denk
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Kyungmin Park
      • [U-Boot] [PATCH] arm_cortexa8: support cache flush to other soc   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Fix PMC405DE support   Matthias Fuchs
  • [U-Boot] [PATCH] ppc4xx: Fix PMC405DE support   Stefan Roese
• [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Simon Kagstrom
  • [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Simon Kagstrom
    • [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Stefan Roese
      • [U-Boot] [PATCH, RFC] Make arm926ejs use -march=armv5t to avoid problems with EABI   Simon Kagstrom
• [U-Boot] Question AT91SAM9G20 boot from SD   Konrad Mattheis
  • [U-Boot] Question AT91SAM9G20 boot from SD   Albin Tonnerre
    • [U-Boot] Question AT91SAM9G20 boot from SD   Konrad Mattheis
    • [U-Boot] Question AT91SAM9G20 boot from SD   Albin Tonnerre
• [U-Boot] Starting compressed win CE kernel   A. Geisreiter
  • [U-Boot] Starting compressed win CE kernel   Wolfgang Denk
    • [U-Boot] Starting compressed win CE kernel   A. Geisreiter
      • [U-Boot] Starting compressed win CE kernel   Wolfgang Denk
      • [U-Boot] Starting compressed win CE kernel   Dirk Behme
• [U-Boot] ARM mach-types.h sync request   Daniel Gorsulowski
  • [U-Boot] ARM mach-types.h sync request   Wolfgang Denk
    • [U-Boot] ARM mach-types.h sync request   Daniel Gorsulowski
• [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
  • [U-Boot] [Fwd: Newest Version U-boot]   Dirk Behme
  • [U-Boot] [Fwd: Newest Version U-boot]   Wolfgang Denk
    • [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
      • [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
      • [U-Boot] [Fwd: Newest Version U-boot]   Marcos Cunha
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Wolfgang Denk
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Simon Kagstrom
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
• [U-Boot] PPC440GX: DDR ECC init time.   Wouter Eckhardt
  • [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
    • [U-Boot] PPC440GX: DDR ECC init time.   Wouter Eckhardt
      • [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
      • [U-Boot] PPC440GX: DDR ECC init time.   Wouter Eckhardt
      • [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
      • [U-Boot] PPC440GX: DDR ECC init time.   Felix Radensky
      • [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
      • [U-Boot] PPC440GX: DDR ECC init time.   Felix Radensky
      • [U-Boot] PPC440GX: DDR ECC init time.   Stefan Roese
      • [U-Boot] PPC440GX: DDR ECC init time.   Grant Erickson
  • [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Marcel ziswiler
    • [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Peter Tyser
    • [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Heiko Schocher
      • [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v1] mpc8260: move FDT memory node fixup into common CPU code.   Heiko Schocher
• [U-Boot] sh7760 platform   Luca Luminari
• [U-Boot] [PATCH] atmel_df_pow2: standalone to convert dataflashes to pow2   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
  • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
    • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Scott Wood
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Scott Wood
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
      • [U-Boot] [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Scott Wood
      • [U-Boot] 答复: [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Hu Mingkai-B21284
      • [U-Boot] 答复: [PATCH 01/10] mkconfig: parse top level makefile target to multiple config targets   Wolfgang Denk
• [U-Boot] [PATCH 1/3] Consolidate arch-specific sbrk() implementations   Wolfgang Denk
• [U-Boot] [PATCH 2/3] Standardize mem_malloc_init() implementation   Wolfgang Denk
• [U-Boot] [PATCH 3/3] Consolidate arch-specific mem_malloc_init() implementations   Wolfgang Denk
• [U-Boot] [PATCH 01/17] Add errno.h to i386   Wolfgang Denk
• [U-Boot] [PATCH 02/17] Change inline asm global symbols to local   Wolfgang Denk
• [U-Boot] [PATCH 03/17] Fix regression introduced by commit 8c63d47651f7   Wolfgang Denk
• [U-Boot] [PATCH 04/17] Fix environment configuration for eNET board   Wolfgang Denk
• [U-Boot] [PATCH 05/17] Fix sc520 timer interrupt generation   Wolfgang Denk
• [U-Boot] [PATCH 06/17] Misc i386 PCI fixups   Wolfgang Denk
• [U-Boot] [PATCH 07/17] Misc SATA fixups   Wolfgang Denk
• [U-Boot] [PATCH 08/17] Misc ti_pci1410a fixups   Wolfgang Denk
• [U-Boot] [PATCH 09/17] Misc ds1722 fixups   Wolfgang Denk
• [U-Boot] [PATCH 10/17] Fixup sc520_spunk board   Wolfgang Denk
• [U-Boot] [PATCH 11/17] Misc sc520 cdp fixups   Wolfgang Denk
• [U-Boot] [PATCH 12/17] Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure   Wolfgang Denk
• [U-Boot] [PATCH 13/17] Moved PCI from #ifdef to conditional compile for sc520 boards   Wolfgang Denk
• [U-Boot] [PATCH 14/17] Add PCI support to eNET board   Wolfgang Denk
• [U-Boot] [RFC][PATCH] Ethernet Support for eNET Board   Wolfgang Denk
• [U-Boot] [PATCH] Use different PBA value for E1000 PCI and PCIe cards   Wolfgang Denk
• [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Wolfgang Denk
  • [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Simon Kagstrom
    • [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Prafulla Wadaskar
    • [U-Boot] [PATCH] ARM: compiler options cleanup - improve tool chain support   Simon Kagstrom
• [U-Boot] [PATCH v2] Add ability for arch code to make changes before we boot   Wolfgang Denk
  • [U-Boot] [PATCH 1/8] USB Consolidate descriptor definitions   Tom Rix
  • [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Tom Rix
  • [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Tom Rix
  • [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Tom Rix
  • [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Tom
  • [U-Boot] [PATCH 4/8] OMAP3 Add usb device support   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Tom
  • [U-Boot] [PATCH 3/8] TWL4030 Add usb PHY support   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 2/8] USB add macros for debugging usb device setup.   Tom
  • [U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration   Tom Rix
  • [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration   Tom Rix
  • [U-Boot] [PATCH 7/8] USBTTY make some function declarations easier to use.   Tom Rix
  • [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom Rix
  • [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 8/8] OMAP3 zoom2 Use usbtty if the debug board is not connected.   Tom
  • [U-Boot] [PATCH 6/8] OMAP3 beagle Add usbtty configuration   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] Add chip select region to galaxy5200   Wolfgang Denk
• [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Wolfgang Denk
  • [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Wolfgang Denk
      • [U-Boot] [PATCH v4 0/4]: bitops cleanup and fixes   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] USB device support for OMAP3   Tom
  • [U-Boot] USB device support for OMAP3   Pandita, Vikram
  • [U-Boot] USB device support for OMAP3   Dirk Behme
• [U-Boot] ARM mach-types.h sync request   Wolfgang Denk
  • [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Justin Waters
    • [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Simon Kagstrom
      • [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Denk
      • [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Peter Tyser
      • [U-Boot] [PATCH] fsl_i2c: increase I2C timeout values and make them configurable   Heiko Schocher
• [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
  • [U-Boot] RFC: split ARM repo and distribute workload   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] RFC: split ARM repo and distribute workload   Prafulla Wadaskar
  • [U-Boot] RFC: split ARM repo and distribute workload   Dirk Behme
    • [U-Boot] RFC: split ARM repo and distribute workload   Paulraj, Sandeep
      • [U-Boot] RFC: split ARM repo and distribute workload   Tom
      • [U-Boot] RFC: split ARM repo and distribute workload   Paulraj, Sandeep
      • [U-Boot] RFC: split ARM repo and distribute workload   Tom
      • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
      • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
  • [U-Boot] RFC: split ARM repo and distribute workload   Kyungmin Park
    • [U-Boot] RFC: split ARM repo and distribute workload   Prafulla Wadaskar
    • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
    • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
      • [U-Boot] RFC: split ARM repo and distribute workload   Minkyu Kang
  • [U-Boot] RFC: split ARM repo and distribute workload   Magnus Lilja
    • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
  • [U-Boot] Merging u-boot-s3c24xx with u-boot-samsung   Wolfgang Denk
    • [U-Boot] Merging u-boot-s3c24xx with u-boot-samsung   Harald Welte
  • [U-Boot] RFC: split ARM repo and distribute workload   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
      • [U-Boot] RFC: split ARM repo and distribute workload   Prafulla Wadaskar
      • [U-Boot] RFC: split ARM repo and distribute workload   Wolfgang Denk
      • [U-Boot] RFC: split ARM repo and distribute workload   Tom
      • [U-Boot] RFC: split ARM repo and distribute workload   Tom
      • [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Timur Tabi
      • [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Timur Tabi
      • [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Timur Tabi
      • [U-Boot] [PATCH 2/2] fsl: add register read-back to set_law()   Kumar Gala
• [U-Boot] [PATCH] Add support for the DevKit8000 board   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] Add support for the DevKit8000 board   Dirk Behme
• [U-Boot] [PATCH] Add support for the Calao SBC35-A9G20 board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AT91: Add support for blue_LED_* and add coloured_LED_init to at91/led.c   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] AT91: Add support for blue_LED_* and add coloured_LED_init to at91/led.c   Albin Tonnerre
    • [U-Boot] [PATCH] AT91: Add support for blue_LED_* and add coloured_LED_init to at91/led.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [U-BOOT][Patch] DM9000 init for pm9261   Ilko Iliev
• [U-Boot] boot linux data aboot for S3C2440A   fluke56512
  • [U-Boot] boot linux data aboot for S3C2440A   Gaye Abdoulaye Walsimou
• [U-Boot] [PATCH] MCI support for AT91 family processors.   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] [PATCH] MCI support for AT91 family processors.   Albin Tonnerre
    • [U-Boot] [PATCH] MCI support for AT91 family processors.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] ARM Pull Request   Dirk Behme
    • [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] ARM Pull Request   Dirk Behme
      • [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
      • [U-Boot] ARM Pull Request   Dirk Behme
      • [U-Boot] ARM Pull Request   Peter Tyser
      • [U-Boot] ARM Pull Request   Dirk Behme
      • [U-Boot] ARM Pull Request   Peter Tyser
      • [U-Boot] ARM Pull Request   Tom
      • [U-Boot] ARM Pull Request   Wolfgang Denk
      • [U-Boot] ARM Pull Request   Tom
      • [U-Boot] ARM Pull Request   Dirk Behme
      • [U-Boot] ARM Pull Request   Wolfgang Denk
      • [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
  • [U-Boot] ARM Pull Request   Heiko Schocher
    • [U-Boot] ARM Pull Request   Heiko Schocher
    • [U-Boot] ARM Pull Request   Wolfgang Denk
  • [U-Boot] ARM Pull Request   Wolfgang Denk
    • [U-Boot] [PATCH] at91: move base address define to soc header   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support   Albin Tonnerre
    • [U-Boot] [PATCH v3] AT91: Add SD/MMC controller support   Albin Tonnerre
  • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
    • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Gary Jennejohn
    • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Wolfgang Denk
      • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
      • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   Wolfgang Denk
      • [U-Boot] [PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards   kevin.morfitt at fearnside-systems.co.uk
  • [U-Boot] s3c24x0 code changes   kevin.morfitt at fearnside-systems.co.uk
    • [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Eric Benard
    • [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Jean-Christophe PLAGNIOL-VILLARD
    • [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Eric Bénard
    • [U-Boot] [PATCH] Add support for Eukrea CPU9260/CPU9G20 SBC   Wolfgang Denk
    • [U-Boot] MTD compile error   Kumar Gala
    • [U-Boot] MTD compile error   Stefan Roese
• [U-Boot] Warning in omap3_mmc.c   Dirk Behme
  • [U-Boot] Warning in omap3_mmc.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] omap: move TI's boards to board/ti/   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] omap: move TI's boards to board/ti/   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] reloacting uboot   Ulf Samuelsson
  • [U-Boot] [PATCH-ARM 1/4] Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code   kevin.morfitt at fearnside-systems.co.uk
  • [U-Boot] [PATCH-ARM 2/4] Clean-up of s3c24x0 header files   kevin.morfitt at fearnside-systems.co.uk
  • [U-Boot] [PATCH-ARM 3/4] Clean-up of s3c24x0 drivers excluding nand driver   kevin.morfitt at fearnside-systems.co.uk
    • [U-Boot] [PATCH-ARM 3/4] Clean-up of s3c24x0 drivers excluding nand driver   Gaye Abdoulaye Walsimou
  • [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   kevin.morfitt at fearnside-systems.co.uk
    • [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   Scott Wood
    • [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   Wolfgang Denk
    • [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   abdoulaye Walsimou Gaye
    • [U-Boot] [PATCH-ARM 4/4] Clean-up of s3c24x0 nand driver   Scott Wood
• [U-Boot] Microblaze repo update - patches   Michal Simek
  • [U-Boot] Microblaze repo update - patches   Wolfgang Denk
    • [U-Boot] Microblaze repo update - patches   Michal Simek
      • [U-Boot] Microblaze repo update - patches   Ben Warren
  • [U-Boot] Microblaze repo update - patches   Ben Warren
• [U-Boot] How to burn new U-Boot over network   alex889
  • [U-Boot] How to burn new U-Boot over network   Daniel Gorsulowski
    • [U-Boot] How to burn new U-Boot over network   alex889
      • [U-Boot] How to burn new U-Boot over network   Scott Wood
      • [U-Boot] [PATCH 1/5] tools: mkimage: Include default/fit_image.o in the build dependency calculations   Prafulla Wadaskar
      • [U-Boot] [PATCH 2/5][repost] tools: mkimage: Making genimg_print_size API global   Prafulla Wadaskar
      • [U-Boot] [PATCH 2/5][repost] tools: mkimage: Making genimg_print_size API global   Wolfgang Denk
      • [U-Boot] [PATCH 1/5] tools: mkimage: Include default/fit_image.o in the build dependency calculations   Wolfgang Denk
      • [U-Boot] [PATCH 3/5][repost] tools: mkimage: Making table_entry code global   Prafulla Wadaskar
      • [U-Boot] [PATCH 4/5] Kirkwood: Sheevaplug: kwimage configuration   Prafulla Wadaskar
      • [U-Boot] [PATCH v4 5/5] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
      • [U-Boot] [PATCH 4/5] Kirkwood: Sheevaplug: kwimage configuration   Wolfgang Denk
      • [U-Boot] [PATCH 3/5][repost] tools: mkimage: Making table_entry code global   Wolfgang Denk
      • [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
      • [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
      • [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Prafulla Wadaskar
      • [U-Boot] [PATCH v4 5/5][repost] tools: mkimage: Add: Kirkwood Boot Image support (kwbimage)   Wolfgang Denk
      • [U-Boot] [PATCH] ppc4xx: Fix compilation warning in 4xx miiphy.c   Stefan Roese
      • [U-Boot] [PATCH] ppc4xx: Fix compilation warning in 4xx miiphy.c   Stefan Roese
  • [U-Boot] autoscr command failure saveenv dataflash   Berns
    • [U-Boot] autoscr command failure saveenv dataflash   Wolfgang Denk
      • [U-Boot] [PATCH 1/2] ppc4xx: Allow overwriting pci target registers for all 4xx boards   Matthias Fuchs
      • [U-Boot] [PATCH 2/2] ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards   Matthias Fuchs
      • [U-Boot] [PATCH 2/2] ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards   Stefan Roese
      • [U-Boot] [PATCH 1/2] ppc4xx: Allow overwriting pci target registers for all 4xx boards   Stefan Roese
      • [U-Boot] [PATCH] Remove "atmel_df_pow2" binary with "make clean"   Wolfgang Denk
      • [U-Boot] [PATCH] Remove "atmel_df_pow2" binary with "make clean"   Wolfgang Denk
• [U-Boot] Enabling D cache on Arm Cortex A8 in U-boot   akshay ts
  • [U-Boot] U-boot environment on Sheevaplug   Prafulla Wadaskar
    • [U-Boot] [PATCH v1 1/2] mkconfig: pass the board name to board config file   Mingkai Hu
    • [U-Boot] [PATCH v2 2/2] mpc8536: simplify the top makefile for 36-bit config   Mingkai Hu
    • [U-Boot] [PATCH v2 2/2] mpc8536: simplify the top makefile for 36-bit config   Kumar Gala
    • [U-Boot] [PATCH v1 1/2] mkconfig: pass the board name to board config file   Kumar Gala
    • [U-Boot] [PATCH v1 1/2] mkconfig: pass the board name to board config file   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc4xx: Rename compactcenter to intip   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
  • [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
    • [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] u-boot-1.3.4 porting problem   王培养
  • [U-Boot] u-boot-1.3.4 porting problem   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Kumar Gala
  • [U-Boot] Please pull u-boot-mpc85xx - master branch   Wolfgang Denk
    • [U-Boot] [PATCH] TI DaVinci: DM355: Config Cleanup   s-paulraj at ti.com
    • [U-Boot] [PATCH] TI DaVinci: DM365: Minor Updates to DM365 EVM   s-paulraj at ti.com
    • [U-Boot] [PATCH] TI DaVinci: DM365: Minor Updates to DM365 EVM   Wolfgang Denk
  • [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
  • [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
    • [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Wolfgang Denk
      • [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
      • [U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.   Wolfgang Denk
      • [U-Boot] [PATCH][v2] r7780mp: fix typo in Ethernet chip model number comment.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] r7780mp: fix typo in Ethernet chip model number comment.   Wolfgang Denk
  • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
    • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
      • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
      • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
      • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
      • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
      • [U-Boot] [PATCH][v1] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] FDT: remove obsolete OF_CPU and OF_SOC macros.   Guennadi Liakhovetski
      • [U-Boot] [PATCH][v2] FDT: remove obsolete OF_CPU and OF_SOC macros.   Wolfgang Denk
  • [U-Boot] [PATCH][v1] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Marcel Ziswiler
    • [U-Boot] [PATCH][v1] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Heiko Schocher
      • [U-Boot] [PATCH][v2] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] muas3001: remove BRG clock node fixup to use common mpc8260 code.   Wolfgang Denk
  • [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
    • [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Wolfgang Denk
      • [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Heiko Schocher
      • [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
    • [U-Boot] [PATCH][v1] mpc8260: remove Ethernet node fixup to use generic FDT code.   Heiko Schocher
      • [U-Boot] [PATCH][v2] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] mpc8260: remove Ethernet node fixup to use generic FDT code.   Wolfgang Denk
  • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
    • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
      • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
      • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
      • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
    • [U-Boot] [PATCH][v2] mpc8260: move FDT memory node fixup into common CPU code.   Heiko Schocher
      • [U-Boot] [PATCH][v3] mpc8260: move FDT memory node fixup into common CPU code.   Marcel Ziswiler
      • [U-Boot] [PATCH][v3] mpc8260: move FDT memory node fixup into common CPU code.   Wolfgang Denk
  • [U-Boot] [PATCH][v3] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
    • [U-Boot] [PATCH][v3] ep8248: add support for device tree and secondary Ethernet interface.   Wolfgang Denk
      • [U-Boot] [PATCH][v3] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
      • [U-Boot] [PATCH][v4] ep8248: add support for device tree and secondary Ethernet interface.   Marcel Ziswiler
      • [U-Boot] [PATCH][v4] ep8248: add support for device tree and secondary Ethernet interface.   Wolfgang Denk
      • [U-Boot] [PATCH] TI DaVinci: DM646x: Initial Support for DM646x SOC   s-paulraj at ti.com
      • [U-Boot] [PATCH] TI DaVinci: DM646x: Initial Support for DM646x SOC   Paulraj, Sandeep
• [U-Boot] PowerPC -mrelocatable   Peter Tyser
  • [U-Boot] PowerPC -mrelocatable   Mike Frysinger
  • [U-Boot] PowerPC -mrelocatable   Wolfgang Denk
    • [U-Boot] PowerPC -mrelocatable   Joakim Tjernlund
    • [U-Boot] PowerPC -mrelocatable   Peter Tyser
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   s-paulraj at ti.com
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Tom
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   J.C. Wren
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   J.C. Wren
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Jerry Van Baren
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   J.C. Wren
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Jerry Van Baren
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
      • [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx   Jerry Van Baren
      • [U-Boot] [PATCH] ppc/85xx: Clean up do_reset   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Clean up do_reset   Kumar Gala
• [U-Boot] [PATCH] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
• [U-Boot] [PATCH v2] 85xx: Move to a common linker script   Wolfgang Denk
  • [U-Boot] [PATCH v2] TI DaVinci: Remove references to SZ_xx   s-paulraj at ti.com
  • [U-Boot] [PATCH v2] TI DaVinci: Remove references to SZ_xx   Wolfgang Denk
  • [U-Boot] [PATCH v2] TI DaVinci: DM355: Config Cleanup and Update   s-paulraj at ti.com
  • [U-Boot] [PATCH v2] TI DaVinci: DM355: Config Cleanup and Update   John Rigby
  • [U-Boot] [PATCH v2] TI DaVinci: DM355: Config Cleanup and Update   Paulraj, Sandeep
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Mingkai Hu
  • [U-Boot] [PATCH 2/2] mpc8536: simplify the top makefile for 36-bit config   Mingkai Hu
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Stefan Roese
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Hu Mingkai-B21284
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Scott Wood
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Kumar Gala
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Hu Mingkai-B21284
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Michal Simek
  • [U-Boot] [PATCH v2 1/2] mkconfig: split the board make target to multiple config targets   Wolfgang Denk
• [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?   akshay ts
  • [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?   Dirk Behme
    • [U-Boot] Why Cache flush required in some ARM Cortex boards to enable D cache?   akshay ts
      • [U-Boot] [PATCH v3] ppc4xx: Rename compactcenter to intip   Dirk Eibach
      • [U-Boot] [PATCH v3] ppc4xx: Rename compactcenter to intip   Wolfgang Denk
• [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support & [PATCH v3]   Konrad Mattheis
  • [U-Boot] [PATCH v2] AT91: Add SD/MMC controller support & [PATCH v3]   Albin Tonnerre
    • [U-Boot] [PATCH v3] AT91: Problems with SD   Konrad Mattheis
    • [U-Boot] [PATCH v3] AT91: Problems with SD   Albin Tonnerre
• [U-Boot] [PATCH 0/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
• [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
  • [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Detlev Zundel
    • [U-Boot] [PATCH 1/2] mpc52xx, mucmc52, uc101: config cleanup   Wolfgang Denk
      • [U-Boot] [PATCHv2 1/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
      • [U-Boot] [PATCHv2 1/2] mpc52xx, mucmc52, uc101: config cleanup   Detlev Zundel
      • [U-Boot] [PATCHv2 1/2] mpc52xx, mucmc52, uc101: config cleanup   Heiko Schocher
      • [U-Boot] [PATCHv3 1/2] mpc5200, mucmc52, uc101: config cleanup   Heiko Schocher
      • [U-Boot] [PATCHv3 1/2] mpc5200, mucmc52, uc101: config cleanup   Detlev Zundel
      • [U-Boot] [PATCHv3 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
  • [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
    • [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
      • [U-Boot] [PATCHv2 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCHv2 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Detlev Zundel
      • [U-Boot] [PATCHv2 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Stefan Roese
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Jerry Van Baren
      • [U-Boot] [PATCH v4 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Wolfgang Denk
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Wolfgang Denk
      • [U-Boot] [PATCH 1/1] at91: Update MEESC board support   Daniel Gorsulowski
    • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Detlev Zundel
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Grandegger
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Timur Tabi
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Grandegger
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Wolfgang Grandegger
      • [U-Boot] fsl_i2c: increase I2C timeout values and make them configurable   Joakim Tjernlund
      • [U-Boot] [PATCH v1] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dipen Dudhat
      • [U-Boot] [PATCH v1] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
      • [U-Boot] [PATCH] net: kirkwood_egiga.c: fixed build warning   Prafulla Wadaskar
      • [U-Boot] [PATCH v2] net: kirkwood_egiga.c: fixed build warning   Prafulla Wadaskar
      • [U-Boot] [PATCH v4] ppc4xx: Rename compactcenter to intip   Dirk Eibach
      • [U-Boot] [PATCH v4] ppc4xx: Rename compactcenter to intip   Stefan Roese
• [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
  • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
    • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Wolfgang Denk
      • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
  • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Magnus Lilja
    • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
      • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Wolfgang Denk
      • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   javier Martin
      • [U-Boot] [PATCH v2] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Wolfgang Denk
      • [U-Boot] [PATCH v2] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH 1/2 v3] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH 1/2 v3] env: only build env_embedded and envcrc when needed   Wolfgang Denk
      • [U-Boot] [PATCH 2/2] Blackfin: tweak embedded env config option   Mike Frysinger
      • [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Mike Frysinger
      • [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Wolfgang Denk
      • [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Mike Frysinger
      • [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Wolfgang Denk
      • [U-Boot] [PATCH 2/2 v2] Blackfin: tweak embedded env config option   Mike Frysinger
      • [U-Boot] [PATCH 1/2 v4] env: only build env_embedded and envcrc when needed   Mike Frysinger
      • [U-Boot] [PATCH 2/2 v3] Blackfin: tweak embedded LDR env config option   Mike Frysinger
• [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Mike Frysinger
  • [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Wolfgang Denk
    • [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Mike Frysinger
      • [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Wolfgang Denk
      • [U-Boot] [PATCH] tools/netconsole: make a bit more robust and use ncb when possible   Mike Frysinger
      • [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Mike Frysinger
      • [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Wolfgang Denk
      • [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Mike Frysinger
      • [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Wolfgang Denk
      • [U-Boot] [PATCH] move default bootm config options to config_cmd_default.h   Mike Frysinger
• [U-Boot] [PATCH] ppc/85xx: Set CONFIG_SYS_MONITOR_LEN correctly   Kumar Gala
  • [U-Boot] [PATCH] ppc/85xx: Set CONFIG_SYS_MONITOR_LEN correctly   Wolfgang Denk
    • [U-Boot] [PATCH] ppc/85xx: Set CONFIG_SYS_MONITOR_LEN correctly   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Use CONFIG_SYS_MONITOR_LEN in linker script   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Use CONFIG_SYS_MONITOR_LEN in linker script   Wolfgang Denk
    • [U-Boot] [PATCH] TI: OMAP3: Remove SZ_xx references   s-paulraj at ti.com
    • [U-Boot] [PATCH] TI: OMAP3: Remove SZ_xx references   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Big cleanup of PPC4xx defines   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Big cleanup of PPC4xx defines   Stefan Roese
    • [U-Boot] [PATCH v2] TI: OMAP3: Remove SZ_xx references   s-paulraj at ti.com
    • [U-Boot] [PATCH 1/2 v2] tools/netconsole: make a bit more robust   Mike Frysinger
    • [U-Boot] [PATCH 1/2 v2] tools/netconsole: make a bit more robust   Wolfgang Denk
    • [U-Boot] [PATCH 2/2 v2] tools/netconsole: use ncb automatically if available   Mike Frysinger
    • [U-Boot] [PATCH 2/2 v2] tools/netconsole: use ncb automatically if available   Wolfgang Denk
    • [U-Boot] [PATCH] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Wolfgang Denk
  • [U-Boot] LZMA support   Prafulla Wadaskar
    • [U-Boot] LZMA support   Mike Frysinger
      • [U-Boot] LZMA support   khteh at smartbridges.com
    • [U-Boot] LZMA support   Luigi Mantellini
      • [U-Boot] [PATCH v2] document network driver framework   Mike Frysinger
      • [U-Boot] [PATCH v2] document network driver framework   Wolfgang Denk
      • [U-Boot] [PATCH] TI DaVinci: DM6446: Fix Compilation error in NAND mode   s-paulraj at ti.com
      • [U-Boot] [PATCH] TI DaVinci: DM6446: Fix Compilation error in NAND mode   Paulraj, Sandeep
      • [U-Boot] [PATCH v2] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Kumar Gala
      • [U-Boot] [PATCH v2] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Wolfgang Denk
      • [U-Boot] [PATCH v2] ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address   Kumar Gala
• [U-Boot] Getting pcmcia drivers builtin by default (bug?)   Kristoffer Ericson
  • [U-Boot] Getting pcmcia drivers builtin by default (bug?)   Wolfgang Denk
• [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Roy Zang
  • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Kumar Gala
  • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Zang Roy-R61911
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Hu Mingkai-B21284
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Hu Mingkai-B21284
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Wolfgang Denk
    • [U-Boot] [PATCH] Enable usb ehci support for p2020ds board   Felix Radensky
    • [U-Boot] [PATCH] net: Fix problem with 405EZ ethernet interrupt   Stefan Roese
    • [U-Boot] [PATCH] net: Fix problem with 405EZ ethernet interrupt   Ben Warren
• [U-Boot] [PATCH 1/4 v2] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
  • [U-Boot] [PATCH 1/4 v2] s5pc1xx: support Samsung s5pc1xx SoC   Wolfgang Denk
    • [U-Boot] [PATCH 1/4 v2] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
      • [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
      • [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Tom
      • [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Minkyu Kang
      • [U-Boot] [PATCH 1/4 v3] s5pc1xx: support Samsung s5pc1xx SoC   Tom
• [U-Boot] [PATCH 2/4 v2] s5pc1xx: support onenand driver   Minkyu Kang
  • [U-Boot] [PATCH 2/4 v2] s5pc1xx: support onenand driver   Wolfgang Denk
    • [U-Boot] [PATCH 2/4 v2] s5pc1xx: support onenand driver   Minkyu Kang
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Minkyu Kang
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Tom
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Minkyu Kang
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Kyungmin Park
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Tom
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Wolfgang Denk
      • [U-Boot] [PATCH 2/4 v3] s5pc1xx: support onenand driver   Scott Wood
• [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Minkyu Kang
  • [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Wolfgang Denk
    • [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Minkyu Kang
      • [U-Boot] [PATCH 3/4 v2] s5pc1xx: support serial driver   Minkyu Kang
      • [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Minkyu Kang
      • [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Tom
      • [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Minkyu Kang
      • [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Tom
      • [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Tom
      • [U-Boot] [PATCH 3/4 v3] s5pc1xx: support serial driver   Minkyu Kang
• [U-Boot] [PATCH 4/4 v2] s5pc1xx: add support SMDKC100 board   Minkyu Kang
  • [U-Boot] [PATCH 4/4 v2] s5pc1xx: add support SMDKC100 board   Wolfgang Denk
    • [U-Boot] [PATCH 4/4 v2] s5pc1xx: add support SMDKC100 board   Minkyu Kang
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Minkyu Kang
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Peter Tyser
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Peter Tyser
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Minkyu Kang
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Minkyu Kang
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Kyungmin Park
      • [U-Boot] [PATCH 4/4 v3] s5pc1xx: add support SMDKC100 board   Tom
• [U-Boot] nash   Konrad Mattheis
  • [U-Boot] nash   Wolfgang Denk
• [U-Boot] [PATCH "mkimage" branch] tools/mkimage: fix compiler warnings, use "const"   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx - master branch   Kumar Gala
  • [U-Boot] Please pull u-boot-mpc85xx - master branch   Wolfgang Denk
    • [U-Boot] [PATCH] ppc/85xx: Don't enable interrupts before we're ready   Kumar Gala
• [U-Boot] Please pull ppc4xx/master   Stefan Roese
  • [U-Boot] Please pull ppc4xx/master   Wolfgang Denk
• [U-Boot] [PATCH] Support for the OpenRD base board   Simon Kagstrom
  • [U-Boot] [PATCH v2] Support for the OpenRD base board   Simon Kagstrom
    • [U-Boot] [PATCH v2] Support for the OpenRD base board   Prafulla Wadaskar
    • [U-Boot] [PATCH v2] Support for the OpenRD base board   Simon Kagstrom
    • [U-Boot] [PATCH v2] Support for the OpenRD base board   Prafulla Wadaskar
    • [U-Boot] [PATCH v2] Support for the OpenRD base board   Simon Kagstrom
    • [U-Boot] [PATCH v2] Support for the OpenRD base board   Prafulla Wadaskar
  • [U-Boot] [PATCH v3] Support for the OpenRD base board   Simon Kagstrom
    • [U-Boot] [PATCH v3] Support for the OpenRD base board   Prafulla Wadaskar
  • [U-Boot] [PATCH v4] Support for the OpenRD base board   Simon Kagstrom
    • [U-Boot] [PATCH v4] Support for the OpenRD base board   Prafulla Wadaskar
    • [U-Boot] [PATCH v4] Support for the OpenRD base board   Prafulla Wadaskar
  • [U-Boot] [PATCH] MCI support for AT91 family processors.   Albin Tonnerre
    • [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dipen Dudhat
    • [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
    • [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dudhat Dipen-B09055
    • [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Bin Meng
• [U-Boot] Our competition sells these lists for $2500 and more   Luciano U Palmer
  • [U-Boot] [PATCH v3] at91: Update MEESC board support   Daniel Gorsulowski
  • [U-Boot] [PATCH v3] at91: Update MEESC board support   Daniel Gorsulowski
  • [U-Boot] [PATCH v3] at91: Update MEESC board support   Wolfgang Denk
  • [U-Boot] [PATCH v3] at91: Update MEESC board support   Tom
  • [U-Boot] [PATCH v3] at91: Update MEESC board support   Wolfgang Denk
• [U-Boot] I found an error   sun peng
  • [U-Boot] I found an error   Wolfgang Denk
    • [U-Boot] I found an error   Minkyu Kang
      • [U-Boot] I found an error   Sun, Peng 2
      • [U-Boot] I found an error   Minkyu Kang
  • [U-Boot] [PATCH v3] AT91: Problems with SD   Albin Tonnerre
    • [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Martha M Stan
    • [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Wolfgang Denk
    • [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Martha J Marx
    • [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Wolfgang Denk
    • [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for all mpc512x boards   Martha M Stan
    • [U-Boot] [PATCH] Add new Elpida memory configuration for mpc5121ads board   Martha M Stan
    • [U-Boot] [PATCH] Add new Elpida memory configuration for mpc5121ads board   Wolfgang Denk
• [U-Boot] configure ppc440spe as pci adapter   dbrazeau
  • [U-Boot] configure ppc440spe as pci adapter   Stefan Roese
  • [U-Boot] configure ppc440spe as pci adapter   Wolfgang Denk
    • [U-Boot] configure ppc440spe as pci adapter   dbrazeau
      • [U-Boot] configure ppc440spe as pci adapter   Wolfgang Denk
      • [U-Boot] [PATCH] ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Remove some bogus code from external interrupt handler.   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Remove some bogus code from external interrupt handler.   Kumar Gala
      • [U-Boot] [PATCH] ppc/8xxx: Misc DDR related fixes   Kumar Gala
      • [U-Boot] [PATCH] ppc/8xxx: Misc DDR related fixes   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for P1_P2_RDB boards   Kumar Gala
      • [U-Boot] [PATCH] ppc/85xx: Simplify the top makefile for P1_P2_RDB boards   Scott Wood
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Ken MacLeod
  • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Scott Wood
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Scott Wood
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Andy Fleming
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Ken MacLeod
    • [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Ben Warren
  • [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Mike Frysinger
  • [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Wolfgang Denk
  • [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Ben Warren
  • [U-Boot] [PATCH] smc91111_eeprom: get working with net multi conversion   Mike Frysinger
• [U-Boot] [PATCH] OMAP3 Move cache routines to cache.S   Paulraj, Sandeep
  • [U-Boot] [PATCH] OMAP3 Move cache routines to cache.S   Tom
    • [U-Boot] [PATCH v2 0/5] Add boot from NAND/eSDHC/eSPI support   Mingkai Hu
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Mingkai Hu
    • [U-Boot] [PATCH v2 2/5] NAND boot: change NAND loader's relocate SP to CONFIG param   Mingkai Hu
    • [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Mingkai Hu
    • [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Kumar Gala
    • [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Kumar Gala
    • [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Kumar Gala
    • [U-Boot] [PATCH v2 3/5] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v2 2/5] NAND boot: change NAND loader's relocate SP to CONFIG param   Scott Wood
    • [U-Boot] [PATCH v2 2/5] NAND boot: change NAND loader's relocate SP to CONFIG param   Kumar Gala
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v2 4/5] On-chip ROM boot: MPC8536DS support   Mingkai Hu
    • [U-Boot] [PATCH v2 5/5] Add README.mpc8536ds   Mingkai Hu
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Mingkai Hu
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Wolfgang Denk
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Scott Wood
    • [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
    • [U-Boot] [PATCH v1 0/3] Add support for saveing env variable to SDCard   Mingkai Hu
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Mingkai Hu
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Wolfgang Denk
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Hu Mingkai-B21284
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Konrad Mattheis
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Wolfgang Denk
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Konrad Mattheis
    • [U-Boot] [PATCH v1 1/3] Make mmc init come before env_relocate   Scott Wood
    • [U-Boot] [PATCH v1 2/3] Add support for save environment variable to MMC/SD card   Mingkai Hu
    • [U-Boot] [PATCH v1 2/3] Add support for save environment variable to MMC/SD card   Wolfgang Denk
    • [U-Boot] [PATCH v1 2/3] Add support for save environment variable to MMC/SD card   Hu Mingkai-B21284
    • [U-Boot] [PATCH v1 3/3] mpc8536: Get the address of env on the SDCard   Mingkai Hu
    • [U-Boot] [PATCH v1 3/3] mpc8536: Get the address of env on the SDCard   Wolfgang Denk
    • [U-Boot] [PATCH v1 3/3] mpc8536: Get the address of env on the SDCard   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 1/5] 85xx: add boot from NAND/eSDHC/eSPI support   Mingkai Hu
    • [U-Boot] [PATCH v3 3/5] NAND boot: MPC8536DS support   Mingkai Hu
    • [U-Boot] [PATCH v3 3/5] NAND boot: MPC8536DS support   Wolfgang Denk
    • [U-Boot] [PATCH v3 3/5] NAND boot: MPC8536DS support   Hu Mingkai-B21284
• [U-Boot] Uboot Standalone Applications- Test_burst   vneethv
  • [U-Boot] Uboot Standalone Applications- Test_burst   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
  • [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] tigon3 Ethernet - any users / testers out there?   Wolfgang Denk
  • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 64 bit systems   Wolfgang Denk
  • [U-Boot] [PATCH] net/bootp.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] net/bootp.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Scott Wood
  • [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/flagadm/flash.c: fix compile warning   Scott Wood
  • [U-Boot] [PATCH v2] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH v2] board/flagadm/flash.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] drivers/net/natsemi.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] drivers/net/natsemi.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] sk98lin: fix compile warnings   Wolfgang Denk
  • [U-Boot] [PATCH] sk98lin: fix compile warnings   Wolfgang Denk
  • [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Matthias Fuchs
  • [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Stefan Roese
  • [U-Boot] [PATCH] board/esd/common/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/esd/cpci750/ide.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/esd/cpci750/ide.c: fix compile warning   Stefan Roese
  • [U-Boot] [PATCH] board/esd/cpci750/ide.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 64 bit systems   Wolfgang Denk
• [U-Boot] Does u-boot support nand flash boot   Sun, Peng 2
  • [U-Boot] [PATCH] board/dave/common/flash.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/etin/debris/phantom.c: Fix compile error   Wolfgang Denk
  • [U-Boot] [PATCH] board/etin/debris/phantom.c: Fix compile error   Wolfgang Denk
  • [U-Boot] [PATCH] board/amcc/yucca/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/amcc/yucca/flash.c: Fix compile warning   Stefan Roese
  • [U-Boot] [PATCH] board/amcc/yucca/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/dave/common/flash.c: fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/amcc/common/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/amcc/common/flash.c: Fix compile warning   Stefan Roese
  • [U-Boot] [PATCH] board/amcc/common/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
  • [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
  • [U-Boot] [PATCH] board/linkstation/ide.c: Fix compile warning   Scott Wood
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Guennadi Liakhovetski
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH v2] board/linkstation/ide.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/amcc/taihu/flash.c: Fix compile warning   Wolfgang Denk
  • [U-Boot] [PATCH] board/amcc/taihu/flash.c: Fix compile warning   Stefan Roese
  • [U-Boot] [PATCH] board/amcc/taihu/flash.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH] AT91RM9200 BGA port D defines   Jens Scharsig
• [U-Boot] Fix compile warning / error   Wolfgang Denk
• [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Mike Frysinger
  • [U-Boot] [PATCH][Net] Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API   Wolfgang Denk
    • [U-Boot] [PATCH] Support for Calao USB A9263 board based on AT91SAM9263 CPU   Thomas Petazzoni
    • [U-Boot] [PATCH] Support for Calao USB A9263 board based on AT91SAM9263 CPU   Wolfgang Denk
• [U-Boot] [PATCH][v3] mpc8260: remove Ethernet node fixup to use generic FDT code.   Marcel Ziswiler
  • [U-Boot] [PATCH][v3] mpc8260: remove Ethernet node fixup to use generic FDT code.   Wolfgang Denk
• [U-Boot] Maintainer Yuli Barcohen   Marcel Ziswiler
  • [U-Boot] Maintainer Yuli Barcohen   Frank Svendsbøe
  • [U-Boot] Maintainer Yuli Barcohen   Wolfgang Denk
    • [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence allowing for   Martha M Stan
    • [U-Boot] [PATCH] Streamlined mpc512x fixed_sdram init sequence allowing for   Wolfgang Denk
    • [U-Boot] [PATCH] ppc4xx: Fix 405EZ uart base baud calculation   Stefan Roese
    • [U-Boot] [PATCH] ppc4xx: Fix 405EZ uart base baud calculation   Stefan Roese
    • [U-Boot] [PATCH] ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia   Stefan Roese
    • [U-Boot] [PATCH] ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia   Stefan Roese
    • [U-Boot] [PATCH 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
    • [U-Boot] [PATCH 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
    • [U-Boot] [PATCH] Add support for the Calao QIL-A9G20 board   Albin Tonnerre
    • [U-Boot] [PATCH] Add support for the Calao QIL-A9G20 board   Wolfgang Denk
    • [U-Boot] [PATCH 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
    • [U-Boot] [PATCH 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
    • [U-Boot] [PATCH v2 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
    • [U-Boot] [PATCH v2 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
    • [U-Boot] [PATCH v2 2/2] ppc/85xx: Repack tlb_table to save space   Kumar Gala
    • [U-Boot] [PATCH v2 1/2] ppc/85xx: Introduce low level write_tlb function   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Move code around to prep for NAND_SPL   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Move code around to prep for NAND_SPL   Kumar Gala
• [U-Boot] [PATCH] cmd_fdt.c: fix parse of byte streams and strings   Scott Wood
  • [U-Boot] [PATCH v4] ppc/85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
  • [U-Boot] [PATCH v4] ppc/85xx: add boot from NAND/eSDHC/eSPI support   Kumar Gala
• [U-Boot] [RFC][PATCH] NAND boot: MPC8536DS support   Kumar Gala
  • [U-Boot] [RFC][PATCH] NAND boot: MPC8536DS support   Kumar Gala
  • [U-Boot] [RFC][PATCH] NAND boot: MPC8536DS support   Hu Mingkai-B21284
  • [U-Boot] [PATCH 1/2] ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL   Kumar Gala
  • [U-Boot] [PATCH 2/2] ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL   Kumar Gala
  • [U-Boot] [PATCH 2/2] ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL   Kumar Gala
  • [U-Boot] [PATCH 1/2] ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL   Kumar Gala
• [U-Boot] [PATCH v2] cmd_fdt.c: fix parse of byte streams and strings   Ken MacLeod
  • [U-Boot] [PATCH v2] cmd_fdt.c: fix parse of byte streams and strings   Jerry Van Baren
    • [U-Boot] [PATCH] ppc/85xx: Disable all async interrupt sources when we boot   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Disable all async interrupt sources when we boot   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Disable all async interrupt sources when we boot   Kumar Gala
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
  • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Dirk Behme
    • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Jean-Christian de Rivaz
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Tom
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
  • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Steve Sakoman
  • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
    • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
  • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
    • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Nishanth Menon
    • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Tom
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
      • [U-Boot] Applying u-boot-ti patches (was: [PATCH v2] TI: OMAP3: Overo Tobi ethernet support)   Dirk Behme
      • [U-Boot] Applying u-boot-ti patches (was: [PATCH v2] TI: OMAP3: Overo Tobi ethernet support)   Paulraj, Sandeep
      • [U-Boot] Applying u-boot-ti patches   Dirk Behme
      • [U-Boot] Applying u-boot-ti patches   Paulraj, Sandeep
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Dirk Behme
      • [U-Boot] [PATCH v2] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
    • [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Dirk Behme
      • [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Mike Frysinger
      • [U-Boot] smc911x runtime detection   Tom
      • [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Olof Johansson
      • [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Ben Warren
      • [U-Boot] smc911x runtime detection (was: TI: OMAP3: Overo Tobi ethernet support)   Olof Johansson
      • [U-Boot] smc911x runtime detection   Dirk Behme
    • [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support   Ben Warren
      • [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
      • [U-Boot] [PATCH] Add Elpida Memory Configuration to mpc5121ads Boards   Martha M Stan
      • [U-Boot] [PATCH] Add Elpida Memory Configuration to mpc5121ads Boards   Wolfgang Denk
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Wolfgang Denk
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Graeme Russ
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Peter Tyser
      • [U-Boot] [TESTING PATCH] ppc: Relocation test patch   Joakim Tjernlund
• [U-Boot] [PATCH] MIPS: VCT: Remove read_spareram reference   Shinya Kuribayashi
  • [U-Boot] [PATCH] MIPS: VCT: Remove read_spareram reference   Stefan Roese
    • [U-Boot] [PATCH v2] MIPS: VCT: Remove read_spareram reference   Shinya Kuribayashi
      • [U-Boot] [PATCH v2] MIPS: VCT: Remove read_spareram reference   Scott Wood
• [U-Boot] LZMA support   khteh at smartbridges.com
• [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
  • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Ben Warren
    • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
    • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Olof Johansson
      • [U-Boot] [PATCH] TI: OMAP3: Overo Tobi ethernet support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   s-paulraj at ti.com
      • [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: DaVinci: DM355 Leopard board support   Wolfgang Denk
      • [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   s-paulraj at ti.com
      • [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   Paulraj, Sandeep
      • [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   Wolfgang Denk
      • [U-Boot] [PATCH] TI: DaVinci: Adding GIO addresses to header file   Wolfgang Denk
      • [U-Boot] [PATCH] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Dirk Behme
      • [U-Boot] [PATCH] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Paulraj, Sandeep
      • [U-Boot] [PATCH] OMAP3 MMC: Fix warning dereferencing type-punned pointer   Paulraj, Sandeep
      • [U-Boot] [PATCH] OMAP3 Overo: Fix ethernet related warnings   Dirk Behme
      • [U-Boot] [PATCH] OMAP3 Overo: Fix ethernet related warnings   Paulraj, Sandeep
      • [U-Boot] [PATCH] OMAP3 Overo: Fix ethernet related warnings   Wolfgang Denk
• [U-Boot] Any Sa1100 users of uboot out there   Kristoffer Ericson
• [U-Boot] [help] is there anything wrong with my previously sent A320 patches?   Po-Yu Chuang
  • [U-Boot] [help] is there anything wrong with my previously sent A320 patches?   Wolfgang Denk
    • [U-Boot] [help] is there anything wrong with my previously sent A320 patches?   Po-Yu Chuang
      • [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Dipen Dudhat
      • [U-Boot] [PATCH v2] ppc/85xx: PIO Support for FSL eSDHC Controller Driver   Wolfgang Denk
  • [U-Boot] UNITED NATION SCAM VICTIMS COMPENSATION   james phillip
• [U-Boot] Interrupts in uboot with ARM AT91SAM9 (V2)   Manuel Sahm
  • [U-Boot] [PATCH] ppc4xx: Consolidate get_OPB_freq()   Stefan Roese
  • [U-Boot] [PATCH] ppc4xx: Consolidate get_OPB_freq()   Stefan Roese
• [U-Boot] Microblaze Pull Request   Michal Simek
  • [U-Boot] Microblaze Pull Request   Wolfgang Denk
• [U-Boot] Your e-mail address has won:US$1,200,000.00   Euro-Millions International
• [U-Boot] about 88E1145   Zhe Wang
  • [U-Boot] about 88E1145   Prafulla Wadaskar
    • [U-Boot] [PATCH] TI: DaVinci DM365: Minor config cleanup   s-paulraj at ti.com
    • [U-Boot] [PATCH] TI: DaVinci DM365: Minor config cleanup   Paulraj, Sandeep
    • [U-Boot] [PATCH] TI DaVinci DM365: Removing header file which does not exist   s-paulraj at ti.com
    • [U-Boot] [PATCH] TI DaVinci DM365: Removing header file which does not exist   Paulraj, Sandeep
    • [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   s-paulraj at ti.com
    • [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Matt Waddel
    • [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Paulraj, Sandeep
    • [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Paulraj, Sandeep
    • [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Wolfgang Denk
    • [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on DM365   Wolfgang Denk
• [U-Boot] [PATCH] net: [V2] Add LL TEMAC driver to u-boot and move Emaclite to NET_MULTI   Ben Warren
  • [U-Boot] [PATCH] net: [V2] Add LL TEMAC driver to u-boot and move Emaclite to NET_MULTI   Michal Simek
• [U-Boot] U-Boot v2009.08 & JFFS2 (NOR)   Tommy Wang
  • [U-Boot] U-Boot v2009.08 & JFFS2 (NOR)   Jon Diekema
• [U-Boot] [PATCHv5 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
  • [U-Boot] [PATCHv5 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Wolfgang Denk
    • [U-Boot] [PATCHv5 2/2] mucmc52, uc101: delete ata at 3a00 node, if no CF card is detected   Heiko Schocher
• [U-Boot] [PATCH] ubifs: Add support for looking up directory and relative symlinks   Simon Kagstrom
  • [U-Boot] [PATCH] ubifs: Add support for looking up directory and relative symlinks   Stefan Roese
    • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Stefan Roese
    • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Wolfgang Denk
    • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Mike Frysinger
    • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Wolfgang Denk
    • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 32/64 bit systems   Mike Frysinger
    • [U-Boot] [PATCH] kwbimage.c: Fix compile warning when building on 64 bit systems (again)   Wolfgang Denk
    • [U-Boot] [PATCH v2] kwbimage.c: Fix compile warning when building on 64 bit systems (again)   Wolfgang Denk
    • [U-Boot] [PATCH v2] kwbimage.c: Fix compile warning when building on 64 bit systems (again)   Wolfgang Denk
• [U-Boot] UBIFS LZO decompression failure   Simon Kagstrom
• [U-Boot] (no subject)   Konrad Mattheis
• [U-Boot] Firmware Upgrade   Rahanesh
  • [U-Boot] Firmware Upgrade   Wolfgang Denk
    • [U-Boot] Firmware Upgrade   Rahanesh
      • [U-Boot] Firmware Upgrade   Wolfgang Denk
• [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
  • [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
    • [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   Bin Meng
      • [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
      • [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   Anton Vorontsov
      • [U-Boot] No NAND device found!!! Freescale MPC8544+SAMSUNG 1GB Nand Flash , please help!   duckycool
• [U-Boot] REF:UKHY/BD3113BD   UK NATIONAL LOTTERY
  • [U-Boot] [PATCH 1/2] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Timur Tabi
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Timur Tabi
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Wolfgang Grandegger
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Wolfgang Grandegger
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Wolfgang Grandegger
  • [U-Boot] [PATCH 2/2] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_DFSR   Joakim Tjernlund
• [U-Boot] [PATCH v4 1/4]: Move __set/clear_bit from ubifs.h to bitops.h   Wolfgang Denk
• [U-Boot] still nothing on serial output sa1100   Kristoffer Ericson
• [U-Boot] [PATCH v4 2/4]: arm: Make arm bitops endianness-independent   Wolfgang Denk
• [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Wolfgang Denk
  • [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Stefan Roese
    • [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Simon Kagstrom
      • [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Stefan Roese
      • [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Simon Kagstrom
      • [U-Boot] [PATCH v4 3/4]: Define ffs/fls for all architectures   Stefan Roese
• [U-Boot] [PATCH v4 4/4]: arm: Define test_and_set_bit and test_and_clear bit for ARM   Wolfgang Denk
• [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
  • [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Fred Fan
    • [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Alan Carvalho de Assis
  • [U-Boot] Subject: [PATCH v3] mx27ads: add support for iMX27ADS board from Freescale   Wolfgang Denk
• [U-Boot] Flashing images bigger than ram   Ben Goska
  • [U-Boot] Flashing images bigger than ram   Scott Wood
  • [U-Boot] Flashing images bigger than ram   Kyungmin Park
    • [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200   Kumar Gala
    • [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200   Peter Tyser
    • [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200   Kumar Gala
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued.   Paul Gibson
  • [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued.   Wolfgang Denk
    • [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued.   Scott Wood
• [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
  • [U-Boot] Please pull u-boot-mpc85xx   Anton Vorontsov
    • [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
  • [U-Boot] Please pull u-boot-mpc85xx   Wolfgang Denk
    • [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Peter Tyser
    • [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Kumar Gala
    • [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Peter Tyser
    • [U-Boot] [PATCH] ppc/85xx: Fix LCRR_CLKDIV defines   Chris Moore
    • [U-Boot] [PATCH 2/7] mpc85xx: Add eSDHC support for MPC8569E-MDS boards   Kumar Gala
    • [U-Boot] [PATCH 3/7] mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards   Kumar Gala
    • [U-Boot] [PATCH 4/7] mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards   Kumar Gala
    • [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Kumar Gala
    • [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Jerry Van Baren
    • [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Anton Vorontsov
    • [U-Boot] [PATCH 1/7] fdt_support: Add multi-serial support for stdout fixup   Jerry Van Baren
• [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued   Paul Gibson
  • [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued   Scott Wood
  • [U-Boot] [PATCH] mpc512x. Micron nand flash needs a reset before a read command is issued   Wolfgang Denk
    • [U-Boot] [PATCH v3] mpc83xx: update LCRR register handling   Kumar Gala
    • [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields (was: Re: [PATCH v3] mpc83xx: update LCRR register handling)   Kim Phillips
    • [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Heiko Schocher
    • [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Kim Phillips
    • [U-Boot] [PATCH] mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields   Kim Phillips
  • [PATCH] Fix bug in jumptable call stubs for SPARC. Seems, that i am the first who tested it.   Sergey Mironov
  • [PATCH] Fix bug in jumptable call stubs for SPARC.   Sergey Mironov
• [U-Boot] [PATCH] SPARC standalone app fix   Сергей Миронов
  • [U-Boot] [PATCH] SPARC standalone app fix   Daniel Hellstrom
    • [U-Boot] [PATCH] SPARC standalone app fix   Wolfgang Denk
    • [U-Boot] [PATCH] SPARC standalone app fix   Daniel Hellstrom
    • [U-Boot] help command not working in u-boot   Rupesh Kumar
      • [U-Boot] help command not working in u-boot   Wolfgang Denk
      • [U-Boot] help command not working in u-boot   Detlev Zundel
      • [U-Boot] help command not working in u-boot   Rupesh Kumar
• [U-Boot] mpc8572ds: Stuck startup   Isaac Gomez Morales
• [U-Boot] lowlevel_init.s for ARM920t/S3C2410   J.Hwan.Kim
  • [U-Boot] lowlevel_init.s for ARM920t/S3C2410   kevin.morfitt at fearnside-systems.co.uk
    • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
    • [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/DFR}   Joakim Tjernlund
    • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
    • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Heiko Schocher
    • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
    • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Wolfgang Denk
    • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2819, rev 5 to calculate FDR/DFSR   Heiko Schocher
• [U-Boot] error in fw_printenv   Rahanesh
  • [U-Boot] error in fw_printenv   Wolfgang Denk
    • [U-Boot] error in fw_printenv   Rahanesh
      • [U-Boot] error in fw_printenv   Wolfgang Denk
      • [U-Boot] error in fw_printenv   Rahanesh
      • [U-Boot] error in fw_printenv   Rahanesh
      • [U-Boot] error in fw_printenv   Detlev Zundel
• [U-Boot] [STATUS] RFC: stretch merge window?   Wolfgang Denk
  • [U-Boot] [STATUS] RFC: stretch merge window?   Stefan Roese
    • [U-Boot] [STATUS] RFC: stretch merge window?   Kumar Gala
    • [U-Boot] [STATUS] RFC: stretch merge window?   Peter Tyser
  • [U-Boot] [STATUS] RFC: stretch merge window?   Ben Warren
  • [U-Boot] [STATUS] RFC: stretch merge window?   Wolfgang Denk
• [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Kraitschy, Tobias
  • [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Сергей Миронов
  • [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Jerry Van Baren
    • [U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***   Kraitschy, Tobias
• [U-Boot] [PATCH][v3] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
  • [U-Boot] [PATCH][v3] FDT: remove obsolete OF_CPU and OF_SOC macros.   Heiko Schocher
• [U-Boot] [PATCH 1/5] net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs   Anton Vorontsov
• [U-Boot] [PATCH 2/5] net: uec: Fix uccf.h and uec.h headers to include headers they depend on   Anton Vorontsov
• [U-Boot] [PATCH 3/5] mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available   Anton Vorontsov
• [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Anton Vorontsov
  • [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Kim Phillips
    • [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Anton Vorontsov
      • [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Kim Phillips
      • [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Ben Warren
      • [U-Boot] [PATCH 4/5] mpc83xx: mpc8360emds: Use RGMII mode, add workarounds for rev. 2.1 CPUs   Anton Vorontsov
• [U-Boot] [PATCH 5/5] mpc83xx: mpc8360emds: Add QE USB device tree fixups   Anton Vorontsov
  • [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   Peter Tyser
  • [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   André Schwarz
  • [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   Heiko Schocher
  • [U-Boot] [PATCH v2] Remove deprecated 'autoscr' command/variables   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init   Peter Tyser
  • [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() during init   Peter Tyser
  • [U-Boot] [PATCH 2/2] ppc: Clean up calling of phy_reset() during init   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init   Heiko Schocher
  • [U-Boot] [PATCH 1/2] ppc: Clean up calling of misc_init_r() during init   Wolfgang Denk
• [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   Thomas Jackson
  • [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   N Cheung
  • [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   Wolfgang Denk
    • [U-Boot] U-Boot load and run via NAND flash - ARM926EJ-S   Prafulla Wadaskar
• [U-Boot] imx27lite stability problems.   javier Martin
  • [U-Boot] imx27lite stability problems.   Wolfgang Denk
    • [U-Boot] imx27lite stability problems.   javier Martin
      • [U-Boot] imx27lite stability problems.   javier Martin
      • [U-Boot] imx27lite stability problems.   Fred Fan
      • [U-Boot] imx27lite stability problems.   javier Martin
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Heiko Schocher
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Wolfgang Denk
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Heiko Schocher
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Joakim Tjernlund
      • [U-Boot] [PATCH 1/3] fsl_i2c: Wait for STOP condition to propagate   Heiko Schocher
      • [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Joakim Tjernlund
      • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
      • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Heiko Schocher
      • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Wolfgang Grandegger
      • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
      • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Wolfgang Grandegger
      • [U-Boot] [PATCH 3/3] fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR   Joakim Tjernlund
      • [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Heiko Schocher
      • [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Timur Tabi
      • [U-Boot] [PATCH 2/3] fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}   Joakim Tjernlund
• [U-Boot] Compilation error for fw_printenv   Rahanesh
  • [U-Boot] Compilation error for fw_printenv   Wolfgang Denk
    • [U-Boot] Compilation error for fw_printenv   Rahanesh
• [U-Boot] fls definition issue   Hu Mingkai-B21284
  • [U-Boot] fls definition issue   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
  • [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] [PATCH] Correct ffs/fls regression for PowerPC etc   Simon Kagstrom
  • [U-Boot] [PATCH] Correct ffs/fls regression for PowerPC etc   Stefan Roese
    • [U-Boot] [PATCH] Correct ffs/fls regression for PowerPC etc   Wolfgang Denk
  • [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Simon Kagstrom
    • [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Kumar Gala
    • [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Stefan Roese
      • [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Simon Kagstrom
      • [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Stefan Roese
    • [U-Boot] [PATCH v2] Correct ffs/fls regression for PowerPC etc   Wolfgang Denk
• [U-Boot] [PATCH] arm: Correct build with CONFIG_SYS_HUSH_PARSER set   Simon Kagstrom
  • [U-Boot] [PATCH] arm: Correct build with CONFIG_SYS_HUSH_PARSER set   Simon Kagstrom
    • [U-Boot] [PATCH] arm: Correct build with CONFIG_SYS_HUSH_PARSER set   Prafulla Wadaskar
• [U-Boot] I am maintainer of Freescale i.MX   Fred Fan
  • [U-Boot] I am maintainer of Freescale i.MX   Wolfgang Denk
    • [U-Boot] I am maintainer of Freescale i.MX   Fred Fan
    • [U-Boot] I am maintainer of Freescale i.MX   Fan YeFeng-R01011
      • [U-Boot] I am maintainer of Freescale i.MX   Alan Carvalho de Assis
      • [U-Boot] [PATCH 1/3] ppc/85xx: Cleanup p1_p2_rdb PCI setup   Kumar Gala
      • [U-Boot] [PATCH 2/3] ppc/85xx: Clean up p2020ds PCI setup code   Kumar Gala
      • [U-Boot] [PATCH 3/3] ppc/85xx: Clean up mpc8572DS PCI setup code   Kumar Gala
• [U-Boot] Configuring BRGs and BRG input clock on an MPC875   Mikhail Zaturenskiy
  • [U-Boot] Configuring BRGs and BRG input clock on an MPC875   Mikhail Zaturenskiy
    • [U-Boot] Configuring BRGs and BRG input clock on an MPC875   Mikhail Zaturenskiy
• [U-Boot] ..$... 邀請 ...$..   101site
• [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Jonathan Haws
  • [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Ben Warren
  • [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Wolfgang Denk
  • [U-Boot] AMCC 405EX - EMAC0 + EMAC1 Problems   Stefan Roese
• [U-Boot] SD Card in Spi mode boot mpc8315   Marcos Cunha
  • [U-Boot] SD Card in Spi mode boot mpc8315   Konrad Mattheis
• [U-Boot] Uboot 1.1.3 and USB   Stephen Banville
  • [U-Boot] Uboot 1.1.3 and USB   Wolfgang Denk
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Mingkai Hu
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Kumar Gala
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Scott Wood
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Scott Wood
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Kumar Gala
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Kumar Gala
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Liu Dave-R63238
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Dudhat Dipen-B09055
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Wolfgang Denk
    • [U-Boot] [PATCH v3 1/3] NAND boot: MPC8536DS support   Hu Mingkai-B21284
    • [U-Boot] [PATCH v3 2/3] On-chip ROM boot: MPC8536DS support   Mingkai Hu
    • [U-Boot] [PATCH v3 3/3] Add README.mpc8536ds   Mingkai Hu
    • [U-Boot] [PATCH] mpc8536: simplify the top makefile for 36-bit config   Mingkai Hu
    • [U-Boot] [PATCH] ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds   Mingkai Hu
    • [U-Boot] [PATCH] ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds   Kumar Gala
• [U-Boot] Hanging in kmalloc of nand_scan_tail() function   J.Hwan.Kim
  • [U-Boot] Hanging in kmalloc of nand_scan_tail() function   Scott Wood
• [U-Boot] Details of fw_env.config file   Rahanesh
  • [U-Boot] Details of fw_env.config file   Wolfgang Denk
    • [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications. jmp ensures we get back to the location we came from, size(void *) make sure we get the function addresses correctly from the table (entry*4 instead of entry*1).   Daniel Hellstrom
    • [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications.   Daniel Hellstrom
    • [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications.   Wolfgang Denk
    • [U-Boot] [PATCH 1/1] SPARC: fixes exported function stub for standalone applications.   Daniel Hellstrom
• [U-Boot] [PATCH][v4] FDT: remove obsolete OF_CPU and OF_SOC macros.   Marcel Ziswiler
• [U-Boot] OMAP3, RFBI, splash screen   Sergey Lapin
  • [U-Boot] OMAP3, RFBI, splash screen   Dirk Behme
    • [U-Boot] OMAP3, RFBI, splash screen   Nishanth Menon
      • [U-Boot] [PATCH v2 1/3] ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS   Kumar Gala
      • [U-Boot] [PATCH v2 2/3] ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS   Kumar Gala
      • [U-Boot] [PATCH v3 3/3] ppc/85xx: Simplify the top makefile for P1_P2_RDB boards   Kumar Gala
  • [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Scott Wood
    • [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Kyungmin Park
      • [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Scott Wood
      • [U-Boot] [PATCH] [OneNAND IPL] OneNAND board init support   Kyungmin Park
      • [U-Boot] [PATCH 0/7] ppc/p4080: infrastructure patches   Kumar Gala
      • [U-Boot] [PATCH 1/7] ppc/p4080: Add p4080 platform immap definitions   Kumar Gala
      • [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala
      • [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Scott Wood
      • [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Scott Wood
      • [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Ben Warren
      • [U-Boot] [PATCH 2/7] ppc/p4080: Add support for CoreNet style platform LAWs   Kumar Gala