[U-Boot] [PATCH v2] Marvell GuruPlug Board Support

[Prafulla Wadaskar]

> -----Original Message-----
> From: Wolfgang Denk [mailto:wd at denx.de] 
> Sent: Monday, March 22, 2010 1:16 AM
> To: Tom; Prafulla Wadaskar
> Cc: Siddarth Gore; u-boot at lists.denx.de; Ashish Karkare; 
> Prabhanjan Sarnaik
> Subject: Re: [U-Boot] [PATCH v2] Marvell GuruPlug Board Support
> 
> Dear Tom, dear Prafulla,
> 
> In message 
> <1268898134-10793-1-git-send-email-gores at marvell.com> you wrote:
> > GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
> > GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot
> > 
> > References:
> > http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
> > http://plugcomputer.org
> > 
> > This patch is for GuruPlug Plus, but it supports Standard version
> > as well.
> > 
> > Signed-off-by: Siddarth Gore <gores at marvell.com>
> > ---
> > Changes compared to the previous version (messaage-id:
> > 1268660568-23022-1-git-send-email-gores at marvell.com)
> > - maintainers entry sorted according to last name
> > - removed trailing comment from board/Marvell/guruplug/config.mk
> > - removed CONFIG_CMD_AUTOSCRIPT from include/configs/guruplug.h
> > - removed word 'minimal' from comment in include/configs/guruplug.h
> > 
> >  MAINTAINERS                         |    4 +
> >  MAKEALL                             |    1 +
> >  Makefile                            |    3 +
> >  board/Marvell/guruplug/Makefile     |   51 +++++++++
> >  board/Marvell/guruplug/config.mk    |   27 +++++
> >  board/Marvell/guruplug/guruplug.c   |  167 
> +++++++++++++++++++++++++++++
> >  board/Marvell/guruplug/guruplug.h   |   39 +++++++
> >  board/Marvell/guruplug/kwbimage.cfg |  162 
> ++++++++++++++++++++++++++++
> >  include/configs/guruplug.h          |  198 
> +++++++++++++++++++++++++++++++++++
> >  9 files changed, 652 insertions(+), 0 deletions(-)
> >  create mode 100644 board/Marvell/guruplug/Makefile
> >  create mode 100644 board/Marvell/guruplug/config.mk
> >  create mode 100644 board/Marvell/guruplug/guruplug.c
> >  create mode 100644 board/Marvell/guruplug/guruplug.h
> >  create mode 100644 board/Marvell/guruplug/kwbimage.cfg
> >  create mode 100644 include/configs/guruplug.h
> 
> Reviewed-by: Wolfgang Denk <wd at denx.de>

Applied to u-boot-marvell.git master branch

Regards..
Prafulla . .