[U-Boot] [PATCH 4/4] 85xx/fsl-sata: Use is_serdes_configured() to determine if SATA is enabled

[Kumar Gala]

On the MPC85xx platform if we have SATA its connected on SERDES.
Determing if SATA is enabled via sata_initialize should not be board
specific and thus we move it out of the MPC8536DS board code.

Additionally, now that we have is_serdes_configured() we can determine
if the given SATA port is enabled and error out if its not in the
driver.

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 arch/ppc/cpu/mpc85xx/cpu_init.c       |   12 ++++++++++++
 board/freescale/mpc8536ds/mpc8536ds.c |   11 -----------
 drivers/block/fsl_sata.c              |   12 ++++++++++++
 3 files changed, 24 insertions(+), 11 deletions(-)

diff --git a/arch/ppc/cpu/mpc85xx/cpu_init.c b/arch/ppc/cpu/mpc85xx/cpu_init.c
index b517e06..d06caa9 100644
--- a/arch/ppc/cpu/mpc85xx/cpu_init.c
+++ b/arch/ppc/cpu/mpc85xx/cpu_init.c
@@ -30,9 +30,11 @@
 #include <watchdog.h>
 #include <asm/processor.h>
 #include <ioports.h>
+#include <sata.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
 #include "mp.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -403,3 +405,13 @@ void arch_preboot_os(void)
 
 	setup_ivors();
 }
+
+#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
+int sata_initialize(void)
+{
+	if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
+		return __sata_initialize();
+
+	return 1;
+}
+#endif
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index c181f94..e4c1855 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -482,17 +482,6 @@ get_board_ddr_clk(ulong dummy)
 }
 #endif
 
-int sata_initialize(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	uint sdrs2_io_sel =
-		(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
-	if (sdrs2_io_sel & 0x04)
-		return 1;
-
-	return __sata_initialize();
-}
-
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_TSEC_ENET
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 8878560..5875aa8 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -22,6 +22,7 @@
 #include <command.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/fsl_serdes.h>
 #include <malloc.h>
 #include <libata.h>
 #include <fis.h>
@@ -129,6 +130,17 @@ int init_sata(int dev)
 		return -1;
 	}
 
+#ifdef CONFIG_MPC85xx
+	if ((dev == 0) && (!is_serdes_configured(SATA1))) {
+		printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
+		return -1;
+	}
+	if ((dev == 1) && (!is_serdes_configured(SATA2))) {
+		printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev);
+		return -1;
+	}
+#endif
+
 	/* Allocate SATA device driver struct */
 	sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t));
 	if (!sata) {
-- 
1.6.0.6