[U-Boot] Pull request u-boot-blackfin.git
Wolfgang Denk
wd at denx.de
Wed Jul 14 21:55:22 CEST 2010
Dear Mike Frysinger,
In message <1278713901-15574-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
>
> Make sure that argv[] argument pointers are not modified. (2010-07-04 23:55:42 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-blackfin.git master
>
> Hoan Hoang (1):
> Blackfin: ibf-dsp561: enable AX88180 net driver
>
> Michael Hennerich (1):
> Blackfin: bf527-ad7160-eval: new board support
>
> Mike Frysinger (33):
> Blackfin: clean up trace buffer handling when crashing
> Blackfin: implement bootcount support
> Blackfin: expand EVT1 usage documentation a bit more
> Blackfin: bf537-stamp: drop old spi_flash driver
> Blackfin: update anomaly lists to latest sheets
> Blackfin: set up simple NMI handlers for anomaly 05000219
> Blackfin: import gpio/portmux layer from Linux
> Blackfin: unify custom gpio commands
> Blackfin: back out status_led.h stubs
> Blackfin: switch to common GPIO LED driver
> Blackfin: bf537-stamp: use common spi boot workaround code
> Blackfin: convert gpio flash logic to common gpio layer
> Blackfin: bfin_mac: convert to portmux framework
> Blackfin: bfin_nand: convert to portmux framework
> blackfin: bfin_sdh: convert to portmux framework
> Blackfin: pata_bfin: convert to portmux framework
> Blackfin: serial: convert to portmux framework
> Blackfin: bfin_spi: convert to portmux framework
> Blackfin: bfin_spi: support gpios as chip selects
> Blackfin: bf533-stamp: convert eth/flash swap logic to gpio framework
> Blackfin: blackstamp: convert eth/flash swap logic to gpio framework
> Blackfin: bf533-stamp: scrub unused code
> Blackfin: bf518f-ezbrd: handle different PHYs dynamically
> Blackfin: bf518f-ezbrd: convert to portmux framework
> Blackfin: bf548-ezkit: convert to portmux framework
> Blackfin: bf527-ezkit: convert to portmux framework
> Blackfin: cm-bf548: convert to portmux framework
> Blackfin: bf561: use DMA for Core B L1 regions
> Blackfin: unify default I2C settings for ADI boards
> Blackfin: bfin_mac: remove space from name
> Blackfin: enable IP defrag for ADI boards
> Blackfin: drop old u-boot.lds clean target
> Blackfin: bf561-acvilon: drop unused env redund define
>
> MAINTAINERS | 2 +
> MAKEALL | 1 +
> Makefile | 1 -
> arch/blackfin/cpu/Makefile | 3 +
> arch/blackfin/cpu/bootcount.c | 34 +
> arch/blackfin/cpu/cmd_gpio.c | 120 +++
> arch/blackfin/cpu/cpu.c | 4 +-
> arch/blackfin/cpu/cpu.h | 2 +
> arch/blackfin/cpu/gpio.c | 854 ++++++++++++++++
> arch/blackfin/cpu/initcode.c | 32 +-
> arch/blackfin/cpu/interrupt.S | 5 +
> arch/blackfin/cpu/serial.h | 19 +
> arch/blackfin/cpu/traps.c | 76 +-
> arch/blackfin/include/asm/blackfin_local.h | 10 +-
> arch/blackfin/include/asm/gpio.h | 201 ++++
> arch/blackfin/include/asm/mach-bf527/anomaly.h | 196 +++--
> arch/blackfin/include/asm/mach-bf527/def_local.h | 4 +
> arch/blackfin/include/asm/mach-bf527/gpio.h | 65 ++
> arch/blackfin/include/asm/mach-bf527/portmux.h | 220 ++++
> arch/blackfin/include/asm/mach-bf533/anomaly.h | 111 ++-
> arch/blackfin/include/asm/mach-bf533/def_local.h | 4 +
> arch/blackfin/include/asm/mach-bf533/gpio.h | 31 +
> arch/blackfin/include/asm/mach-bf533/portmux.h | 71 ++
> arch/blackfin/include/asm/mach-bf537/anomaly.h | 85 ++-
> arch/blackfin/include/asm/mach-bf537/def_local.h | 4 +
> arch/blackfin/include/asm/mach-bf537/gpio.h | 65 ++
> arch/blackfin/include/asm/mach-bf537/portmux.h | 152 +++
> arch/blackfin/include/asm/mach-bf548/anomaly.h | 96 ++-
> arch/blackfin/include/asm/mach-bf548/def_local.h | 4 +
> arch/blackfin/include/asm/mach-bf548/gpio.h | 203 ++++
> arch/blackfin/include/asm/mach-bf548/portmux.h | 320 ++++++
> arch/blackfin/include/asm/mach-bf561/anomaly.h | 132 ++-
> arch/blackfin/include/asm/mach-bf561/def_local.h | 4 +
> arch/blackfin/include/asm/mach-bf561/gpio.h | 65 ++
> arch/blackfin/include/asm/mach-bf561/portmux.h | 97 ++
> arch/blackfin/include/asm/portmux.h | 1194 ++++++++++++++++++++++
> arch/blackfin/include/asm/system.h | 2 +
> board/bf518f-ezbrd/bf518f-ezbrd.c | 41 +-
> board/bf526-ezbrd/Makefile | 1 -
> board/bf526-ezbrd/status-led.c | 56 -
> board/bf527-ad7160-eval/Makefile | 54 +
> board/bf527-ad7160-eval/bf527-ad7160-eval.c | 25 +
> board/bf527-ad7160-eval/config.mk | 33 +
> board/bf527-ezkit/bf527-ezkit.c | 7 +-
> board/bf527-ezkit/video.c | 13 +-
> board/bf533-stamp/bf533-stamp.c | 84 +--
> board/bf533-stamp/bf533-stamp.h | 53 -
> board/bf533-stamp/ide-cf.c | 10 +-
> board/bf537-stamp/Makefile | 3 +-
> board/bf537-stamp/bf537-stamp.c | 7 +-
> board/bf537-stamp/cmd_bf537led.c | 201 ----
> board/bf537-stamp/spi_flash.c | 996 ------------------
> board/bf548-ezkit/bf548-ezkit.c | 64 +-
> board/bf548-ezkit/video.c | 27 +-
> board/blackstamp/blackstamp.c | 12 +-
> board/cm-bf527/Makefile | 2 +-
> board/cm-bf527/gpio.c | 74 --
> board/cm-bf527/gpio_cfi_flash.c | 21 +-
> board/cm-bf537e/Makefile | 2 +-
> board/cm-bf537e/flash.c | 34 -
> board/cm-bf537e/gpio_cfi_flash.c | 18 +-
> board/cm-bf537u/Makefile | 2 +-
> board/cm-bf537u/flash.c | 34 -
> board/cm-bf537u/gpio_cfi_flash.c | 18 +-
> board/cm-bf548/cm-bf548.c | 55 +-
> board/cm-bf548/video.c | 33 +-
> board/ibf-dsp561/ibf-dsp561.c | 8 +
> board/tcm-bf537/Makefile | 2 +-
> board/tcm-bf537/flash.c | 37 -
> board/tcm-bf537/gpio_cfi_flash.c | 20 +-
> boards.cfg | 1 +
> drivers/block/pata_bfin.c | 25 +-
> drivers/mmc/bfin_sdh.c | 18 +-
> drivers/mtd/nand/bfin_nand.c | 16 +-
> drivers/net/bfin_mac.c | 49 +-
> drivers/spi/bfin_spi.c | 292 ++----
> include/configs/bf518f-ezbrd.h | 22 +-
> include/configs/bf526-ezbrd.h | 14 +-
> include/configs/bf527-ad7160-eval.h | 148 +++
> include/configs/bf527-ezkit.h | 2 -
> include/configs/bf533-ezkit.h | 2 -
> include/configs/bf533-stamp.h | 18 +-
> include/configs/bf537-pnav.h | 2 -
> include/configs/bf537-stamp.h | 4 -
> include/configs/bf538f-ezkit.h | 2 -
> include/configs/bf548-ezkit.h | 2 -
> include/configs/bf561-acvilon.h | 1 -
> include/configs/bf561-ezkit.h | 2 -
> include/configs/bfin_adi_common.h | 15 +
> include/configs/cm-bf527.h | 2 -
> include/configs/cm-bf537e.h | 2 -
> include/configs/cm-bf537u.h | 2 -
> include/configs/cm-bf548.h | 2 -
> include/configs/ibf-dsp561.h | 14 +-
> include/configs/tcm-bf518.h | 2 -
> include/configs/tcm-bf537.h | 2 -
> include/status_led.h | 3 -
> 97 files changed, 4896 insertions(+), 2304 deletions(-)
> create mode 100644 arch/blackfin/cpu/bootcount.c
> create mode 100644 arch/blackfin/cpu/cmd_gpio.c
> create mode 100644 arch/blackfin/cpu/gpio.c
> create mode 100644 arch/blackfin/include/asm/gpio.h
> create mode 100644 arch/blackfin/include/asm/mach-bf527/gpio.h
> create mode 100644 arch/blackfin/include/asm/mach-bf527/portmux.h
> create mode 100644 arch/blackfin/include/asm/mach-bf533/gpio.h
> create mode 100644 arch/blackfin/include/asm/mach-bf533/portmux.h
> create mode 100644 arch/blackfin/include/asm/mach-bf537/gpio.h
> create mode 100644 arch/blackfin/include/asm/mach-bf537/portmux.h
> create mode 100644 arch/blackfin/include/asm/mach-bf548/gpio.h
> create mode 100644 arch/blackfin/include/asm/mach-bf548/portmux.h
> create mode 100644 arch/blackfin/include/asm/mach-bf561/gpio.h
> create mode 100644 arch/blackfin/include/asm/mach-bf561/portmux.h
> create mode 100644 arch/blackfin/include/asm/portmux.h
> delete mode 100644 board/bf526-ezbrd/status-led.c
> create mode 100644 board/bf527-ad7160-eval/Makefile
> create mode 100644 board/bf527-ad7160-eval/bf527-ad7160-eval.c
> create mode 100644 board/bf527-ad7160-eval/config.mk
> delete mode 100644 board/bf533-stamp/bf533-stamp.h
> delete mode 100644 board/bf537-stamp/cmd_bf537led.c
> delete mode 100644 board/bf537-stamp/spi_flash.c
> delete mode 100644 board/cm-bf527/gpio.c
> delete mode 100644 board/cm-bf537e/flash.c
> delete mode 100644 board/cm-bf537u/flash.c
> delete mode 100644 board/tcm-bf537/flash.c
> create mode 100644 include/configs/bf527-ad7160-eval.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Quotation, n. The act of repeating erroneously the words of another.
The words erroneously repeated.
- Ambrose Bierce _The Devil's Dictionary_
More information about the U-Boot
mailing list