[U-Boot] [U-BOOT][PATCH]mmc: modify setting tran_speed and change csd's instead of response value

[Minkyu Kang]

On 18 June 2010 15:13, Jaehoon Chung <jh80.chung at samsung.com> wrote:
> This patch do the following
> 1. we need not use cmd.response, because we assinged cmd.response value to mmc->csd.
> 2. mmc_set_clock() is hard setting, that is not good solution
>   and if mmc is not MMC_MODE_HS, mmc will set card's tran_speed.
>
>  Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>
>
> ---
>  drivers/mmc/mmc.c |   19 ++++++++++---------
>  1 files changed, 10 insertions(+), 9 deletions(-)
>

Acked-by: Minkyu Kang <mk7.kang at samsung.com>

Thanks.
Minkyu Kang
-- 
from. prom.
www.promsoft.net