[U-Boot] [PATCH][v4] powerpc: eSPI and eSPI controller support
Shaohui Xie
b21989 at freescale.com
Tue Apr 26 07:42:34 CEST 2011
From: Mingkai Hu <Mingkai.hu at freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu at freescale.com>
Singed-off-by: Jerry Huang <Chang-Ming.Huang at freescale.com>
Signed-off-by: Shaohui Xie <b21989 at freescale.com>
Cc: Mike Frysinger <vapier at gentoo.org>
----
changes for v2:
remove #ifdef wrapper and refactor spi_xfer by use SPI_XFER(BEGIN | END).
remove 'volatile' use I/O accessors instead.
changes for v3:
move powerpc specific code to asm/config.h.
use spi_claim_bus() to setup hardware rather than spi_setup_slave().
use slave data rather than global.
drop useless return.
changes for v4:
use controller specific struct rather than put in common header.
merge read more than 0xfffa bytes patch.
arch/powerpc/include/asm/config.h | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/fsl_espi.c | 337 +++++++++++++++++++++++++++++++++++++
include/spi.h | 9 +-
4 files changed, 347 insertions(+), 7 deletions(-)
create mode 100644 drivers/spi/fsl_espi.c
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 624d8c2..9aad9be 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -29,6 +29,13 @@
#include <asm/config_mpc86xx.h>
#endif
+/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
+#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI)
+# ifndef CONFIG_HARD_SPI
+# define CONFIG_HARD_SPI
+# endif
+#endif
+
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
#define CONFIG_SYS_BOOT_GET_CMDLINE
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d582fbb..74f1293 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -38,6 +38,7 @@ COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
COBJS-$(CONFIG_SH_SPI) += sh_spi.o
+COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
new file mode 100644
index 0000000..57e0466
--- /dev/null
+++ b/drivers/spi/fsl_espi.c
@@ -0,0 +1,337 @@
+/*
+ * eSPI controller driver.
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Author: Mingkai Hu (Mingkai.hu at freescale.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <malloc.h>
+#include <spi.h>
+#include <asm/immap_85xx.h>
+
+struct fsl_spi_slave {
+ struct spi_slave slave;
+ unsigned int div16;
+ unsigned int pm;
+ unsigned int mode;
+ size_t cmd_len;
+ u8 cmd_buf[16];
+ size_t data_len;
+ unsigned int max_transfer_length;
+};
+
+#define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave)
+
+#define ESPI_MAX_CS_NUM 4
+
+#define ESPI_EV_RNE (1 << 9)
+#define ESPI_EV_TNF (1 << 8)
+
+#define ESPI_MODE_EN (1 << 31) /* Enable interface */
+#define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */
+#define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */
+
+#define ESPI_COM_CS(x) ((x) << 30)
+#define ESPI_COM_TRANLEN(x) ((x) << 0)
+
+#define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31)
+#define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30)
+#define ESPI_CSMODE_REV_MSB_FIRST (1 << 29)
+#define ESPI_CSMODE_DIV16 (1 << 28)
+#define ESPI_CSMODE_PM(x) ((x) << 24)
+#define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20)
+#define ESPI_CSMODE_LEN(x) ((x) << 16)
+#define ESPI_CSMODE_CSBEF(x) ((x) << 12)
+#define ESPI_CSMODE_CSAFT(x) ((x) << 8)
+#define ESPI_CSMODE_CSCG(x) ((x) << 3)
+
+#define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \
+ ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \
+ ESPI_CSMODE_CSCG(1))
+
+#define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct fsl_spi_slave *fsl;
+ sys_info_t sysinfo;
+ unsigned long spibrg = 0;
+ unsigned char pm = 0;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ fsl = malloc(sizeof(struct fsl_spi_slave));
+ if (!fsl)
+ return NULL;
+
+ fsl->slave.bus = bus;
+ fsl->slave.cs = cs;
+ fsl->mode = mode;
+ fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN;
+
+ /* Set eSPI BRG clock source */
+ get_sys_info(&sysinfo);
+ spibrg = sysinfo.freqSystemBus / 2;
+ fsl->div16 = 0;
+ if ((spibrg / max_hz) > 32) {
+ fsl->div16 = ESPI_CSMODE_DIV16;
+ pm = spibrg / (max_hz * 16 * 2);
+ if (pm > 16) {
+ pm = 16;
+ debug("Requested speed is too low: %d Hz"
+ " %d Hz is used.\n", max_hz, spibrg / (32 * 16));
+ }
+ } else
+ pm = spibrg / (max_hz * 2);
+ if (pm)
+ pm--;
+ fsl->pm = pm;
+
+ return &fsl->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
+ free(fsl);
+}
+
+void spi_init(void)
+{
+
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
+ ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
+ unsigned char pm = fsl->pm;
+ unsigned int cs = slave->cs;
+ unsigned int mode = fsl->mode;
+ unsigned int div16 = fsl->div16;
+ int i;
+
+ debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs);
+
+ /* Enable eSPI interface */
+ out_be32(&espi->mode, ESPI_MODE_RXTHR(3)
+ | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN);
+
+ out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */
+ out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */
+
+ /* Init CS mode interface */
+ for (i = 0; i < ESPI_MAX_CS_NUM; i++)
+ out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL);
+
+ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) &
+ ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16
+ | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK
+ | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF)));
+
+ /* Set eSPI BRG clock source */
+ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
+ | ESPI_CSMODE_PM(pm) | div16);
+
+ /* Set eSPI mode */
+ if (mode & SPI_CPHA)
+ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
+ | ESPI_CSMODE_CP_BEGIN_EDGCLK);
+ if (mode & SPI_CPOL)
+ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
+ | ESPI_CSMODE_CI_INACTIVEHIGH);
+
+ /* Character bit order: msb first */
+ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
+ | ESPI_CSMODE_REV_MSB_FIRST);
+
+ /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */
+ out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
+ | ESPI_CSMODE_LEN(7));
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out,
+ void *data_in, unsigned long flags)
+{
+ struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
+ ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
+ unsigned int tmpdout, tmpdin, event;
+ const void *dout = NULL;
+ void *din = NULL;
+ int len;
+ int numBlks, num_chunks, max_tran_len, tran_len;
+ int num_bytes;
+ unsigned char *ch;
+ unsigned char *buffer;
+ size_t buf_len;
+ u8 *cmd_buf = fsl->cmd_buf;
+ size_t cmd_len = fsl->cmd_len;
+ size_t data_len = bitlen / 8;
+ size_t rx_offset;
+
+ max_tran_len = fsl->max_transfer_length;
+ switch (flags) {
+ case SPI_XFER_BEGIN:
+ cmd_len = fsl->cmd_len = data_len;
+ memcpy(cmd_buf, data_out, cmd_len);
+ return 0;
+ case 0:
+ case SPI_XFER_END:
+ if (bitlen == 0) {
+ spi_cs_deactivate(slave);
+ return 0;
+ }
+ buf_len = 2 * cmd_len + min(data_len, max_tran_len);
+ len = cmd_len + data_len;
+ rx_offset = cmd_len;
+ buffer = (unsigned char *)malloc(buf_len);
+ if (!buffer) {
+ debug("SF: Failed to malloc memory.\n");
+ return 1;
+ }
+ memcpy(buffer, cmd_buf, cmd_len);
+ if (cmd_len != 1) {
+ if (data_in == NULL)
+ memcpy(buffer + cmd_len, data_out, data_len);
+ }
+ break;
+ case SPI_XFER_BEGIN | SPI_XFER_END:
+ len = data_len;
+ buffer = (unsigned char *)malloc(len * 2);
+ if (!buffer) {
+ debug("SF: Failed to malloc memory.\n");
+ return 1;
+ }
+ memcpy(buffer, data_out, len);
+ rx_offset = len;
+ cmd_len = 0;
+ break;
+ default:
+ printf("Unsupported flags: %ld\n", flags);
+ return 1;
+ }
+
+ debug("spi_xfer: slave %u:%u dout %08X(%08x) din %08X(%08x) len %u\n",
+ slave->bus, slave->cs, *(uint *) dout,
+ dout, *(uint *) din, din, len);
+
+ num_chunks = data_len / max_tran_len +
+ (data_len % max_tran_len ? 1 : 0);
+ while (num_chunks--) {
+ if (data_in)
+ din = buffer + rx_offset;
+ dout = buffer;
+ tran_len = min(data_len , max_tran_len);
+ numBlks = (tran_len + cmd_len) / 4 +
+ ((tran_len + cmd_len) % 4 ? 1 : 0);
+ num_bytes = (tran_len + cmd_len) % 4;
+ fsl->data_len = tran_len + cmd_len;
+ spi_cs_activate(slave);
+
+ /* Clear all eSPI events */
+ out_be32(&espi->event , 0xffffffff);
+ /* handle data in 32-bit chunks */
+ while (numBlks--) {
+
+ event = in_be32(&espi->event);
+ if (event & ESPI_EV_TNF) {
+ tmpdout = *(u32 *)dout;
+
+ /* Set up the next iteration if sending > 4 bytes */
+ if (len > 4) {
+ len -= 4;
+ dout += 4;
+ }
+
+ out_be32(&espi->tx, tmpdout);
+ out_be32(&espi->event, ESPI_EV_TNF);
+ debug("***spi_xfer:...%08x written\n", tmpdout);
+ }
+
+ /* Wait for eSPI transmit to get out */
+ udelay(80);
+
+ event = in_be32(&espi->event);
+ if (event & ESPI_EV_RNE) {
+ tmpdin = in_be32(&espi->rx);
+ if (numBlks == 0 && num_bytes != 0) {
+ ch = (unsigned char *)&tmpdin;
+ while (num_bytes--)
+ *(unsigned char *)din++ = *ch++;
+ } else {
+ *(u32 *) din = tmpdin;
+ din += 4;
+ }
+
+ out_be32(&espi->event, in_be32(&espi->event)
+ | ESPI_EV_RNE);
+ debug("***spi_xfer:...%08x readed\n", tmpdin);
+ }
+ }
+ if (data_in) {
+ memcpy(data_in, buffer + 2 * cmd_len, tran_len);
+ if (*buffer == 0x0b) {
+ data_in += tran_len;
+ data_len -= tran_len;
+ *(int *)buffer += tran_len;
+ }
+ }
+ spi_cs_deactivate(slave);
+ }
+
+ free(buffer);
+ return 0;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < ESPI_MAX_CS_NUM;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
+ ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
+ unsigned int com = 0;
+ size_t data_len = fsl->data_len;
+
+ com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF));
+ com |= ESPI_COM_CS(slave->cs);
+ com |= ESPI_COM_TRANLEN(data_len - 1);
+ out_be32(&espi->com, com);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
+
+ /* clear the RXCNT and TXCNT */
+ out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN));
+ out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN);
+}
diff --git a/include/spi.h b/include/spi.h
index 320e50e..2a63f7e 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -2,6 +2,8 @@
* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanbaren at cideas.com.
*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -26,13 +28,6 @@
/* Controller-specific definitions: */
-/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
-#ifdef CONFIG_MPC8XXX_SPI
-# ifndef CONFIG_HARD_SPI
-# define CONFIG_HARD_SPI
-# endif
-#endif
-
/* SPI mode flags */
#define SPI_CPHA 0x01 /* clock phase */
#define SPI_CPOL 0x02 /* clock polarity */
--
1.6.4
More information about the U-Boot
mailing list