[U-Boot] Pull request: u-boot-arm/master -- updated
Wolfgang Denk
wd at denx.de
Thu Aug 4 23:24:16 CEST 2011
Dear Albert ARIBAUD,
In message <4E3AD10D.6040907 at aribaud.net> you wrote:
> Hi Wolfgang,
>
> Here is my pull request for u-boot-arm/master, from which I did remove
> the wrongly applied commits that you indicated and in which all patches
> submitted before the merge window closure are taken into account.
>
> Developers, please direct complaints to me for any ARM-directed patches
> submitted before the window closure, and which is not accounted for at
> this point.
>
> Still to apply are bugfix patches submitted after window closure as
> well as the UTF-8 conversion patch and the ARM board removal patch.
>
> The following changes since commit d50a8f45c9a640b3bcbd0ede91f83c8646cca018:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-08-02
> 22:39:36 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-arm.git master
>
> Ajay Bhargav (2):
> Armada100: MFP macro naming correction
> Armada100: Add Board Support for Marvell GuruPlug-Display
>
> Albert ARIBAUD (1):
> Merge commit '7b2fac7654f7420c2787f74ec3b1540fa3b343e9'
>
> Andreas Bießmann (8):
> ARM: remove obsolete at91rm9200
> MAKEALL: remove obsolete at91rm9200 soc
> a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
> README.at91-soc: remove AT91(RM9200) joining notice
> net/eth.c: drop obsolete at91rm9200 support
> README: fix arm920t/at91 path
> a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
> avr32: add grasshopper (ICnova AP7000) board
>
> Aneesh V (21):
> omap1610h2: fix build breaks
> omap5912osk: fix build breaks
> omap1510inn: fix build breaks
> omap1610inn: fix build breaks
> omap2420h4: fix build breaks
> omap730p2: fix build breaks
> omap4: utility function to identify the context of hw init
> omap4: cleanup pin mux data
> omap4: add OMAP4430 revision check
> omap4: add clock support
> omap4: add sdram init support
> omap4: calculate EMIF register values
> omap4: automatic sdram detection
> armv7: start.S: fixes and enhancements for SPL
> omap: add basic SPL support
> omap: add MMC and FAT support to SPL
> omap4: add omap4460 revision detection
> omap4: sdram init changes for omap4460
> omap: reuse omap3 gpio support in omap4
> omap4: support TPS programming
> omap4: clock init support for omap4460
>
> Asen Dimov (1):
> AT91: change common at91sam9261 files to compile with new scheme
>
> Chander Kashyap (1):
> SMDKV310: MMC_SPL: Fix building when using "make O="
>
> Christopher Harvey (1):
> Removed unused define, CONFIG_ARMV7.
>
> Dirk Behme (1):
> ARMv7: u8500_href: Add missing header to fix compiler warning
>
> Heiko Schocher (1):
> cosmetic: arm: lib/board.c: Coding Style cleanup
>
> Jason Cooper (1):
> drivers/rtc: add Marvell Integrated RTC
>
> John Rigby (1):
> mkimage: Add OMAP boot image support
>
> Laurence Withers (6):
> DaVinci: rename gpio_defs.h to gpio.h
> DA8xx: add generic GPIO driver
> DaVinci EMAC: declare function for all DA8xx CPUs
> DA8xx: add MMC/SD controller addresses
> DA8xx: switch an enum to defines for consistency
> DA8xx: fix LPSC constants
>
> Matthias Weisser (1):
> arm: auto gen asm-offsets.h for mb86r0x
>
> Po-Yu Chuang (2):
> arm: a320: fix multiline comment style
> arm: a320: enable tagged list support
>
> Reinhard Meyer (3):
> AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
> MAKEALL: remove AT91 boards that are in boards.cfg
> AT91/SPI: fix atmel_dataflash_spi.c to allow building without
> warnings
>
> Sanjeev Premi (3):
> omap3: Include array definition only when it is used
> omap3evm: eth: split function setup_net_chip
> omap3evm: eth: Include functions only when necessary
>
> Shiraz Hashim (1):
> spear: fix build errors for spear3xx/spear600 platforms
>
> Sriramakrishnan (1):
> omap3evm: Update ethernet reset sequence for Rev.G board
>
> Stefano Babic (1):
> ARM: versatile: fix board support
>
> Thomas Abraham (1):
> SMDKV310: Enable device tree support
>
> Xu, Hong (6):
> AT91: Makes AT91SAM9RL SoC build correctly against
> u-boot-atmel/master
> AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
> AT91: SoC fix at91sam9261_matrix.h
> AT91: Board fix for AT91SAM9261-EK
> AT91: Makes AT91SAM9263 SoC build correctly against
> u-boot-atmel/master
> AT91: Makes AT91SAM9263-EK build correctly against
> u-boot-atmel/master
>
> MAINTAINERS | 5 +
> MAKEALL | 7 -
> Makefile | 63 -
> README | 2 +-
> arch/arm/cpu/arm920t/at91/reset.c | 4 -
> arch/arm/cpu/arm920t/at91rm9200/bcm5221.c | 232 ----
> arch/arm/cpu/arm920t/at91rm9200/dm9161.c | 225 ----
> arch/arm/cpu/arm920t/at91rm9200/ether.c | 316 -----
> arch/arm/cpu/arm920t/at91rm9200/i2c.c | 192 ---
> arch/arm/cpu/arm920t/at91rm9200/ks8721.c | 249 ----
> arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S | 169 ---
> arch/arm/cpu/arm920t/at91rm9200/lxt972.c | 192 ---
> arch/arm/cpu/arm920t/at91rm9200/reset.c | 71 --
> arch/arm/cpu/arm920t/at91rm9200/spi.c | 152 ---
> arch/arm/cpu/arm920t/at91rm9200/timer.c | 142 ---
> arch/arm/cpu/arm920t/cpu.c | 4 -
> arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
> arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 76 +-
> arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 38 +-
> arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 74 +-
> arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 2 +-
> arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 2 +
> arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c | 65 +
> arch/arm/cpu/armv7/Makefile | 7 +-
> arch/arm/cpu/armv7/cpu.c | 7 +
> arch/arm/cpu/armv7/omap-common/Makefile | 6 +
> arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c | 41 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 272 ++++
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 62 +
> arch/arm/cpu/armv7/omap-common/utils.c | 57 +
> arch/arm/cpu/armv7/omap3/Makefile | 1 -
> arch/arm/cpu/armv7/omap3/board.c | 12 +
> arch/arm/cpu/armv7/omap3/sys_info.c | 3 +
> arch/arm/cpu/armv7/omap4/Makefile | 6 +
> arch/arm/cpu/armv7/omap4/board.c | 180 +++-
> arch/arm/cpu/armv7/omap4/clocks.c | 940 ++++++++++++++
> .../panda => arch/arm/cpu/armv7/omap4}/config.mk | 25 +-
> arch/arm/cpu/armv7/omap4/emif.c | 1310
> ++++++++++++++++++++
> arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 +
> arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 282 +++++
> arch/arm/cpu/armv7/start.S | 50 +-
> arch/arm/cpu/armv7/u-boot.lds | 2 +
> arch/arm/include/asm/arch-armada100/mfp.h | 4 +-
> arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
> arch/arm/include/asm/arch-at91/at91sam9261.h | 3 +-
> .../arm/include/asm/arch-at91/at91sam9261_matrix.h | 77 +-
> arch/arm/include/asm/arch-at91/at91sam9263.h | 13 +
> .../arm/include/asm/arch-at91/at91sam9263_matrix.h | 146 +--
> arch/arm/include/asm/arch-at91/at91sam9rl.h | 185 ++--
> arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h | 121 +--
> arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h | 812 ------------
> arch/arm/include/asm/arch-at91rm9200/hardware.h | 75 --
> arch/arm/include/asm/arch-davinci/davinci_misc.h | 2 +-
> .../asm/arch-davinci/{gpio_defs.h => gpio.h} | 8 +
> arch/arm/include/asm/arch-davinci/hardware.h | 102 +-
> arch/arm/include/asm/arch-kirkwood/kirkwood.h | 1 +
> arch/arm/include/asm/arch-mb86r0x/asm-offsets.h | 74 --
> arch/arm/include/asm/arch-mb86r0x/mb86r0x.h | 42 +
> arch/arm/include/asm/arch-omap3/cpu.h | 26 +
> arch/arm/include/asm/arch-omap4/clocks.h | 690 +++++++++++
> arch/arm/include/asm/arch-omap4/cpu.h | 26 +
> arch/arm/include/asm/arch-omap4/emif.h | 1040 ++++++++++++++++
> arch/arm/include/asm/arch-omap4/mux_omap4.h | 1 +
> arch/arm/include/asm/arch-omap4/omap4.h | 61 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 72 ++-
> arch/arm/include/asm/armv7.h | 6 +
> arch/arm/include/asm/omap_common.h | 56 +
> .../include/asm/{arch-omap3/gpio.h => omap_gpio.h} | 27 +-
> arch/arm/lib/board.c | 216 ++--
> .../at91rm9200 => board/Marvell/gplugd}/Makefile | 45 +-
> board/Marvell/gplugd/gplugd.c | 62 +
> board/armltd/versatile/config.mk | 5 -
> board/armltd/versatile/versatile.c | 10 +-
> board/atmel/at91sam9261ek/at91sam9261ek.c | 136 ++-
> board/atmel/at91sam9261ek/config.mk | 1 -
> board/atmel/at91sam9261ek/led.c | 7 +-
> board/atmel/at91sam9263ek/at91sam9263ek.c | 56 +-
> board/atmel/at91sam9263ek/config.mk | 1 -
> board/atmel/at91sam9263ek/led.c | 23 +-
> board/atmel/at91sam9rlek/at91sam9rlek.c | 73 +-
> board/atmel/at91sam9rlek/config.mk | 1 -
> board/atmel/at91sam9rlek/led.c | 6 +-
> board/davinci/dm355leopard/dm355leopard.c | 2 +-
> board/davinci/dm365evm/dm365evm.c | 2 +-
> .../in-circuit/grasshopper}/Makefile | 29 +-
> board/in-circuit/grasshopper/grasshopper.c | 112 ++
> board/spear/common/spr_misc.c | 10 +-
> board/st-ericsson/u8500/u8500_href.c | 1 +
> board/ti/evm/evm.c | 45 +-
> board/ti/evm/evm.h | 1 +
> board/ti/panda/Makefile | 2 +
> board/ti/panda/panda.c | 25 +-
> board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +-
> board/ti/sdp4430/Makefile | 2 +
> board/ti/sdp4430/config.mk | 31 -
> board/ti/sdp4430/sdp.c | 25 +-
> .../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +--
> boards.cfg | 18 +
> common/image.c | 6 +-
> doc/README.at91-soc | 22 -
> drivers/gpio/Makefile | 1 +
> drivers/gpio/da8xx_gpio.c | 281 +++++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/mvrtc.c | 124 ++
> .../at91rm9200/usb.c => drivers/rtc/mvrtc.h | 64 +-
> drivers/spi/atmel_dataflash_spi.c | 16 +-
> drivers/usb/musb/da8xx.h | 2 +-
> include/configs/a320evb.h | 34 +-
> include/configs/am3517_crane.h | 1 -
> include/configs/am3517_evm.h | 1 -
> include/configs/at91sam9261ek.h | 133 ++-
> include/configs/at91sam9263ek.h | 83 +-
> include/configs/at91sam9rlek.h | 85 +-
> include/configs/ca9x4_ct_vxp.h | 3 -
> include/configs/cm_t35.h | 1 -
> include/configs/devkit8000.h | 1 -
> include/configs/dig297.h | 1 -
> include/configs/gplugd.h | 87 ++
> include/configs/grasshopper.h | 198 +++
> include/configs/igep0020.h | 1 -
> include/configs/igep0030.h | 1 -
> include/configs/omap3_beagle.h | 1 -
> include/configs/omap3_evm.h | 1 -
> include/configs/omap3_overo.h | 1 -
> include/configs/omap3_pandora.h | 1 -
> include/configs/omap3_sdp3430.h | 1 -
> include/configs/omap3_zoom1.h | 1 -
> include/configs/omap3_zoom2.h | 1 -
> include/configs/omap4_panda.h | 38 +-
> include/configs/omap4_sdp4430.h | 38 +-
> include/configs/s5p_goni.h | 1 -
> include/configs/s5pc210_universal.h | 1 -
> include/configs/smdkc100.h | 1 -
> include/configs/smdkv310.h | 4 +-
> include/configs/spear-common.h | 12 +
> include/configs/versatile.h | 21 +-
> include/image.h | 1 +
> mmc_spl/board/samsung/smdkv310/Makefile | 12 +-
> net/eth.c | 4 -
> spl/Makefile | 6 +
> tools/Makefile | 2 +
> tools/mkimage.c | 2 +
> tools/mkimage.h | 1 +
> tools/omap/clocks_get_m_n.c | 197 +++
> tools/omapimage.c | 224 ++++
> tools/omapimage.h | 50 +
> 147 files changed, 7971 insertions(+), 4275 deletions(-)
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/bcm5221.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/dm9161.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ether.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/i2c.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/ks8721.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/lxt972.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/reset.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/spi.c
> delete mode 100644 arch/arm/cpu/arm920t/at91rm9200/timer.c
> create mode 100644 arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c
> rename arch/arm/cpu/armv7/{omap3 => omap-common}/gpio.c (76%)
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> create mode 100644 arch/arm/cpu/armv7/omap-common/utils.c
> create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c
> rename {board/ti/panda => arch/arm/cpu/armv7/omap4}/config.mk (64%)
> create mode 100644 arch/arm/cpu/armv7/omap4/emif.c
> create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h
> create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c
> delete mode 100644 arch/arm/include/asm/arch-at91rm9200/AT91RM9200.h
> delete mode 100644 arch/arm/include/asm/arch-at91rm9200/hardware.h
> rename arch/arm/include/asm/arch-davinci/{gpio_defs.h => gpio.h} (90%)
> delete mode 100644 arch/arm/include/asm/arch-mb86r0x/asm-offsets.h
> create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h
> create mode 100644 arch/arm/include/asm/arch-omap4/emif.h
> create mode 100644 arch/arm/include/asm/omap_common.h
> rename arch/arm/include/asm/{arch-omap3/gpio.h => omap_gpio.h} (67%)
> copy {arch/arm/cpu/arm920t/at91rm9200 =>
> board/Marvell/gplugd}/Makefile (54%)
> create mode 100644 board/Marvell/gplugd/gplugd.c
> delete mode 100644 board/armltd/versatile/config.mk
> delete mode 100644 board/atmel/at91sam9261ek/config.mk
> delete mode 100644 board/atmel/at91sam9263ek/config.mk
> delete mode 100644 board/atmel/at91sam9rlek/config.mk
> rename {arch/arm/cpu/arm920t/at91rm9200 =>
> board/in-circuit/grasshopper}/Makefile (73%)
> create mode 100644 board/in-circuit/grasshopper/grasshopper.c
> rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%)
> delete mode 100644 board/ti/sdp4430/config.mk
> rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%)
> create mode 100644 drivers/gpio/da8xx_gpio.c
> create mode 100644 drivers/rtc/mvrtc.c
> rename arch/arm/cpu/arm920t/at91rm9200/usb.c => drivers/rtc/mvrtc.h (50%)
> create mode 100644 include/configs/gplugd.h
> create mode 100644 include/configs/grasshopper.h
> create mode 100644 tools/omap/clocks_get_m_n.c
> create mode 100644 tools/omapimage.c
> create mode 100644 tools/omapimage.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Leave bigotry in your quarters; there's no room for it on the bridge.
-- Kirk, "Balance of Terror", stardate 1709.2
More information about the U-Boot
mailing list