[U-Boot] [PATCH] powerpc/85xx: remove useless info of 36-bit Addressing

[Shengzhou Liu]

We are not doing this any more.  The bdinfo command will be updated to
display this information instead, so remove previous display info.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
---
 board/freescale/corenet_ds/corenet_ds.c |    4 ----
 board/freescale/p2041rdb/p2041rdb.c     |    4 ----
 board/freescale/p3060qds/p3060qds.c     |    3 ---
 3 files changed, 0 insertions(+), 11 deletions(-)

diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index b1eecc4..a33c936 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -62,10 +62,6 @@ int checkboard (void)
 	else
 		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
-
 	/* Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
 	 */
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 6461bd7..1eed67e 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -54,10 +54,6 @@ int checkboard(void)
 	sw = CPLD_READ(fbank_sel);
 	printf("vBank: %d\n", sw & 0x1);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
-
 	/*
 	 * Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
index c6c74f2..c7cca2a 100644
--- a/board/freescale/p3060qds/p3060qds.c
+++ b/board/freescale/p3060qds/p3060qds.c
@@ -68,9 +68,6 @@ int checkboard(void)
 	else
 		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
 	puts("Reset Configuration Word (RCW):");
 	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
 		u32 rcw = in_be32(&gur->rcwsr[i]);
-- 
1.6.4