[U-Boot] [PATCH V10 0/7] SPL Linux boot

[Simon Schwarz]

Hi,

I have not yet factored out the general elements of SPL direct boot. ATM 
i don't have the time - so if someone wants to take it :)

If not this will have to wait, maybe until  next year.

Regards
Simon

On 12/13/2011 11:20 AM, Simon Schwarz wrote:
> Adds direct Linux boot to SPL. It implements a spl export command to save
> ATAGS or FDT to NAND flash. The kernel image has to be in place for this!
>
> Changes in V10:
> - spl_start_uboot replaces spl_uboot_key and is defined weak
> - if the linux image is not found a normal u-boot is started
> - some minor changes
>
> based on:
> - Prep subcommand patch for arm
>
> Please test this patch - there have been major changes!
>
> Simon Schwarz (7):
>    Add cmd_spl command
>    devki8000: add config for spl command
>    omap-common: Add NAND SPL linux booting
>    devkit8000/spl: init GPMC for dm9000 in SPL
>    omap-common/spl: Add linux boot to SPL
>    omap/spl: change output of spl_parse_image_header
>    devkit8000: Implement and activate direct OS boot
>
>   arch/arm/cpu/armv7/omap-common/spl.c      |   51 ++++++-
>   arch/arm/cpu/armv7/omap-common/spl_nand.c |   75 ++++++++--
>   arch/arm/include/asm/omap_common.h        |    3 +
>   board/timll/devkit8000/devkit8000.c       |   57 ++++++-
>   common/Makefile                           |    1 +
>   common/cmd_spl.c                          |  229 +++++++++++++++++++++++++++++
>   doc/README.commands.spl                   |   31 ++++
>   include/cmd_spl.h                         |   30 ++++
>   include/configs/devkit8000.h              |   15 ++-
>   include/image.h                           |    2 +
>   10 files changed, 464 insertions(+), 30 deletions(-)
>   create mode 100644 common/cmd_spl.c
>   create mode 100644 doc/README.commands.spl
>   create mode 100644 include/cmd_spl.h
>