[U-Boot] Pull request: u-boot-tegra/next
Tom Warren
TWarren at nvidia.com
Thu Dec 22 22:51:42 CET 2011
I did a 'git fetch git://git.denx.de/u-boot-arm.git', then rebased on that, as per the Workflow for Custodian git Repos wiki page. But that gave me a large number of changes in my pull request (most of which weren't my recent ones). So I did (on Simon's advice):
git checkout -b next-try u-boot-arm/master
git cherry-pick next~23, etc. for the commits I'd added since the last pull request.
This resulted in a pull request w/just my commits, as below. So I make 'next-try' my 'next' branch & pushed it to u-boot-tegra.
Note that I see this in my 'u-boot-arm' cloned repo, master branch:
commit 4f1a2cd1637027f31de7796aedb1fa5fc0ec0f97
Merge: f8d2c65 953209b
Author: Wolfgang Denk <wd at denx.de>
Date: Mon Dec 12 07:56:41 2011 +0100
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints
post: fix compile issue for post tests on kirkwood
The second hash in the 'Merge: ...' line has the below commit #. Maybe things diverged at some point?
Let me know how I can straighten this out. I'd like to get it in before I leave for the holidays.
Thanks,
Tom
> -----Original Message-----
> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
> Sent: Thursday, December 22, 2011 2:08 PM
> To: Tom Warren
> Cc: Wolfgang Denk; u-boot at lists.denx.de
> Subject: Re: Pull request: u-boot-tegra/next
>
> Le 22/12/2011 21:59, Tom Warren a écrit :
> > Albert,
> >
> > Please pull u-boot-tegra/next. Thanks. Happy holidays!
>
> When I get such a request to 'pull .../next', I am never completely sure
> which branch of u-boot-arm I should be pulling into: is this supposed to be
> pulled into next or master? It *looks* like it is for next, but I want to be
> sure.
>
> In such cases, I tend to try and find out based on the u-boot-arm or u-boot
> branch the changes are based upon, but here:
>
> > The following changes since commit
> 953209bf5ef0889a1baa02aa0ed5324f53ff8fda:
> >
> > arm: add __aeabi_unwind_cpp_pr1() function to avoid linker
> > complaints (2011-12-11 13:56:57 +0100)
>
> This commit corresponds to no branch of u-boot-arm or u-boot at the moment.
> What repo and branch was u-boot-tegra rebased onto before the pull request?
>
> > are available in the git repository at:
> > git://git.denx.de/u-boot-tegra.git next
> >
> > Simon Glass (14):
> > tegra2: Tidy UART selection
> > tegra2: Add UARTB support
> > tegra2: config: Enable SPI flash on Seaboard
> > tegra2: Enable SPI environment on Seaboard
> > tegra2: Implement SPI / UART GPIO switch
> > tegra2: spi: Support SPI / UART switch
> > tegra2: Plumb in SPI/UART switch code
> > tegra: Fix build error in plutux, medcom
> > tegra: Move cpu_init_cp15() to arch_cpu_init()
> > tegra: Move clock_early_init() to arch_cpu_init()
> > tegra: add clock_ll_start_uart() to enable UART prior to reloc
> > tegra: Add a function mux feature
> > tegra: Add support for UART init in cpu board.c
> > tegra: Move boards over to use arch-level board UART function
> >
> > Stephen Warren (1):
> > tegra2: Enable CONFIG_SYS_RELATIVE_IMAGES
> >
> > Thierry Reding (7):
> > tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
> > tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
> > tegra2: Move tegra2_mmc_init() prototype to public header.
> > tegra2: Add common Avionic Design Tamonten support.
> > tegra2: Add Avionic Design Plutux support.
> > tegra2: Add Avionic Design Medcom support.
> > tegra2: Optimize out-of-tree build for Ventana.
> >
> > Tom Warren (2):
> > tegra2: spi: Add SPI driver for Tegra2 SOC
> > arm: Tegra: Fix Harmony and Ventana builds in
> > u-boot-tegra/master
> >
> > MAINTAINERS | 5 +
> > arch/arm/cpu/armv7/tegra2/Makefile | 2 +-
> > arch/arm/cpu/armv7/tegra2/board.c | 58 ++++
> > arch/arm/cpu/armv7/tegra2/clock.c | 14 +
> > arch/arm/cpu/armv7/tegra2/config.mk | 2 +
> > arch/arm/cpu/armv7/tegra2/funcmux.c | 58 ++++
> > arch/arm/include/asm/arch-tegra2/board.h | 30 ++
> > arch/arm/include/asm/arch-tegra2/clock.h | 11 +
> > arch/arm/include/asm/arch-tegra2/funcmux.h | 41 +++
> > arch/arm/include/asm/arch-tegra2/mmc.h | 27 ++
> > arch/arm/include/asm/arch-tegra2/tegra2.h | 1 +
> > arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 76 ++++++
> > arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 46 ++++
> > board/avionic-design/common/tamonten.c | 116 ++++++++
> > board/avionic-design/common/tamonten.h | 32 +++
> > board/avionic-design/medcom/Makefile | 50 ++++
> > board/avionic-design/medcom/medcom.c | 45 ++++
> > board/avionic-design/plutux/Makefile | 50 ++++
> > board/avionic-design/plutux/plutux.c | 45 ++++
> > board/nvidia/common/Makefile | 47 ++++
> > board/nvidia/common/board.c | 73 +----
> > board/nvidia/common/board.h | 2 +-
> > board/nvidia/common/uart-spi-switch.c | 138 ++++++++++
> > board/nvidia/harmony/Makefile | 1 -
> > board/nvidia/harmony/harmony.c | 2 +-
> > board/nvidia/seaboard/Makefile | 1 -
> > board/nvidia/seaboard/seaboard.c | 5 +-
> > board/nvidia/ventana/Makefile | 5 +-
> > boards.cfg | 2 +
> > drivers/mmc/tegra2_mmc.h | 2 -
> > drivers/spi/Makefile | 1 +
> > drivers/spi/tegra2_spi.c | 279
> ++++++++++++++++++++
> > include/configs/harmony.h | 3 +
> > include/configs/medcom.h | 64 +++++
> > include/configs/plutux.h | 64 +++++
> > include/configs/seaboard.h | 20 ++
> > include/configs/tegra2-common.h | 7 +-
> > include/configs/ventana.h | 3 +
> > 38 files changed, 1355 insertions(+), 73 deletions(-) create mode
> > 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
> > create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
> > create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
> > create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
> > create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
> > create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
> > create mode 100644 board/avionic-design/common/tamonten.c
> > create mode 100644 board/avionic-design/common/tamonten.h
> > create mode 100644 board/avionic-design/medcom/Makefile
> > create mode 100644 board/avionic-design/medcom/medcom.c
> > create mode 100644 board/avionic-design/plutux/Makefile
> > create mode 100644 board/avionic-design/plutux/plutux.c
> > create mode 100644 board/nvidia/common/Makefile create mode 100644
> > board/nvidia/common/uart-spi-switch.c
> > create mode 100644 drivers/spi/tegra2_spi.c create mode 100644
> > include/configs/medcom.h create mode 100644 include/configs/plutux.h
>
> And then:
>
> > ----------------------------------------------------------------------
> > ------------- This email message is for the sole use of the intended
> > recipient(s) and may contain confidential information. Any
> > unauthorized review, use, disclosure or distribution is prohibited.
> > If you are not the intended recipient, please contact the sender by
> > reply email and destroy all copies of the original message.
> > ----------------------------------------------------------------------
> > -------------
>
> Please remove this from messages on the list.
>
> Amicalement,
> --
> Albert.
More information about the U-Boot
mailing list