[U-Boot] [PATCH 09/15] ATMEL: fix related common atmel driver files

Reinhard Meyer u-boot at emk-elektronik.de
Fri Feb 18 13:50:07 CET 2011


Signed-off-by: Reinhard Meyer <u-boot at emk-elektronik.de>
---
 drivers/mmc/gen_atmel_mci.c  |    2 +-
 drivers/net/macb.c           |   14 ++++++++------
 drivers/serial/atmel_usart.c |   28 +++++++---------------------
 drivers/spi/atmel_spi.c      |   16 ++++++++--------
 4 files changed, 24 insertions(+), 36 deletions(-)

diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 2984d64..c28c469 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -33,7 +33,7 @@
 #include <asm/errno.h>
 #include <asm/byteorder.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/memory-map.h>
+#include <asm/arch/hardware.h>
 #include "atmel_mci.h"
 
 #ifndef CONFIG_SYS_MMC_CLK_OD
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index acb8d20..72ea1fc 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -469,17 +469,19 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 
 	/* choose RMII or MII mode. This depends on the board */
 #ifdef CONFIG_RMII
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
-	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
+	defined(CONFIG_AT91SAM9XE)
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
 #endif
 #else
-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
-	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
+	defined(CONFIG_AT91SAM9XE)
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index bfa1f3a..e326b2b 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -23,21 +23,7 @@
 
 #include <asm/io.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/memory-map.h>
-
-#if defined(CONFIG_USART0)
-# define USART_ID	0
-# define USART_BASE	USART0_BASE
-#elif defined(CONFIG_USART1)
-# define USART_ID	1
-# define USART_BASE	USART1_BASE
-#elif defined(CONFIG_USART2)
-# define USART_ID	2
-# define USART_BASE	USART2_BASE
-#elif defined(CONFIG_USART3)
-# define USART_ID	3
-# define USART_BASE	USART3_BASE
-#endif
+#include <asm/arch/hardware.h>
 
 #include "atmel_usart.h"
 
@@ -45,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void serial_setbrg(void)
 {
-	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 	unsigned long divisor;
 	unsigned long usart_hz;
 
@@ -54,14 +40,14 @@ void serial_setbrg(void)
 	 * Baud Rate = --------------
 	 *                16 * CD
 	 */
-	usart_hz = get_usart_clk_rate(USART_ID);
+	usart_hz = get_usart_clk_rate(CONFIG_USART_ID);
 	divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
 	writel(USART3_BF(CD, divisor), &usart->brgr);
 }
 
 int serial_init(void)
 {
-	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 
 	writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
 
@@ -80,7 +66,7 @@ int serial_init(void)
 
 void serial_putc(char c)
 {
-	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 
 	if (c == '\n')
 		serial_putc('\r');
@@ -97,7 +83,7 @@ void serial_puts(const char *s)
 
 int serial_getc(void)
 {
-	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 
 	while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
 		 WATCHDOG_RESET();
@@ -106,6 +92,6 @@ int serial_getc(void)
 
 int serial_tstc(void)
 {
-	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
 	return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
 }
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index d0de931..33e38b6 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 
 #include <asm/arch/clk.h>
-#include <asm/arch/memory-map.h>
+#include <asm/arch/hardware.h>
 
 #include "atmel_spi.h"
 
@@ -48,21 +48,21 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 	switch (bus) {
 	case 0:
-		regs = (void *)SPI0_BASE;
+		regs = (void *)ATMEL_BASE_SPI0;
 		break;
-#ifdef SPI1_BASE
+#ifdef ATMEL_BASE_SPI1
 	case 1:
-		regs = (void *)SPI1_BASE;
+		regs = (void *)ATMEL_BASE_SPI1;
 		break;
 #endif
-#ifdef SPI2_BASE
+#ifdef ATMEL_BASE_SPI2
 	case 2:
-		regs = (void *)SPI2_BASE;
+		regs = (void *)ATMEL_BASE_SPI2;
 		break;
 #endif
-#ifdef SPI3_BASE
+#ifdef ATMEL_BASE_SPI3
 	case 3:
-		regs = (void *)SPI3_BASE;
+		regs = (void *)ATMEL_BASE_SPI3;
 		break;
 #endif
 	default:
-- 
1.5.6.5



More information about the U-Boot mailing list