[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Albert ARIBAUD]

Le 13/01/2011 07:40, Stefano Babic a écrit :
> Hi Wolfgang,
>
> The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59:
>
>    Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100)
>
> are available in the git repository at:
>
>    git://www.denx.de/git/u-boot-imx.git master
>
> Liu Hui-R64343 (9):
>        MX51EVK: UART does not print out the early information
>        MX5: Add initial support for MX53 processor
>        fec_mxc: add support for MX53 processor
>        serial_mxc: add support for MX53 processor
>        mxc_gpio: add support for MX53 processor
>        mxc_i2c: add support for MX53 processor
>        fsl_pmic: add I2C interface support
>        imximage: Add MX53 boot image support
>        MX5:MX53: add initial support for MX53EVK board
>
>   MAINTAINERS                                 |    4 +
>   arch/arm/cpu/armv7/mx5/iomux.c              |   30 ++-
>   arch/arm/cpu/armv7/mx5/lowlevel_init.S      |   91 +++---
>   arch/arm/cpu/armv7/mx5/soc.c                |   22 +-
>   arch/arm/include/asm/arch-mx5/asm-offsets.h |    5 +
>   arch/arm/include/asm/arch-mx5/imx-regs.h    |   82 ++---
>   arch/arm/include/asm/arch-mx5/iomux.h       |  102 ------
>   arch/arm/include/asm/arch-mx5/mx5x_pins.h   |  469
> ++++++++++++++++++++++++++-
>   board/freescale/mx51evk/mx51evk.c           |   11 +-
>   board/freescale/mx53evk/Makefile            |   48 +++
>   board/freescale/mx53evk/config.mk           |   24 ++
>   board/freescale/mx53evk/imximage.cfg        |  112 +++++++
>   board/freescale/mx53evk/mx53evk.c           |  397 +++++++++++++++++++++++
>   boards.cfg                                  |    1 +
>   doc/README.imximage                         |   12 +-
>   drivers/gpio/mxc_gpio.c                     |    9 +-
>   drivers/i2c/mxc_i2c.c                       |   21 +-
>   drivers/misc/fsl_pmic.c                     |   45 +++-
>   drivers/net/fec_mxc.c                       |    2 +-
>   drivers/net/fec_mxc.h                       |    4 +-
>   drivers/serial/serial_mxc.c                 |    6 +
>   include/configs/mx51evk.h                   |    5 +-
>   include/configs/mx53evk.h                   |  193 +++++++++++
>   include/configs/vision2.h                   |    3 +-
>   include/mc13892.h                           |    5 +
>   tools/imximage.c                            |  421 +++++++++++++++++++-----
>   tools/imximage.h                            |  110 +++++--
>   27 files changed, 1900 insertions(+), 334 deletions(-)
>   mode change 100644 =>  100755 arch/arm/cpu/armv7/mx5/iomux.c
>   mode change 100644 =>  100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S
>   mode change 100644 =>  100755 arch/arm/include/asm/arch-mx5/imx-regs.h
>   mode change 100644 =>  100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h
>   create mode 100755 board/freescale/mx53evk/Makefile
>   create mode 100755 board/freescale/mx53evk/config.mk
>   create mode 100644 board/freescale/mx53evk/imximage.cfg
>   create mode 100755 board/freescale/mx53evk/mx53evk.c
>   mode change 100644 =>  100755 drivers/i2c/mxc_i2c.c
>   mode change 100644 =>  100755 include/configs/mx51evk.h
>   create mode 100755 include/configs/mx53evk.h

I think I should be the one doing the pull as the ARM custodian. I'll be 
doing it this evening.

Amicalement,
-- 
Albert.