[U-Boot] [PATCH 2/2 v2] mpc5200, digsy_mtc: add support for rev5 board version

Heiko Schocher hs at denx.de
Thu Jan 13 08:25:00 CET 2011


difference to previous board version:
- M29W128GH flash from Numonyx
- SDRAM ISSI IS45S16800 (Option A2 105°C)
- rev5 uses RTC RV-3029-C2
- update cs0 and cs1 baseaddr and length
  depending on the detected flash size.
- added Werner Pfister <Pfister_Werner at intercontrol.de>
  as maintainer for the digsy board variants
- As the M29W128GH needs a special flash_cmd_reset()
  document that in the new file doc/README.cfi.
- move "#endif /* CONFIG_CMD_IDE */" to the right place
- remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5
  boards
- change doc/README.cfi as Stefan Roese suggested

Signed-off-by: Heiko Schocher <hs at denx.de>
Signed-off-by: Stefan Roese <sr at denx.de>
cc: Wolfgang Denk <hs at denx.de>
cc: Stefan Roese <sr at denx.de>
cc: Werner Pfister <Pfister_Werner at intercontrol.de>
cc: Detlev Zundel <dzu at denx.de>

---
changes against v1:
- add comments from Wolfgang Denk
  - add Copyright to board/digsy_mtc/is45s16800a2.h
  - change ft_adapt_flash_base() and ft_delete_node()
    to void functions, and add printf warnings in it,
    if they fail
  - to commit message:
    - move "#endif /* CONFIG_CMD_IDE */" to the right place
    - remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5
      boards
    - change doc/README.cfi as Stefan suggested
  - remove unneccessary "#if defined(CONFIG_DIGSY_REV5)... #endif"
    around gd->bd->bi_flashstart = base;
  - add comment why deleting the RTC node in ft_board_setup()
  - add Detlev Zundel to cc:

 MAINTAINERS                    |    4 ++
 board/digsy_mtc/digsy_mtc.c    |  109 +++++++++++++++++++++++++++++++++++++++-
 board/digsy_mtc/is45s16800a2.h |   31 +++++++++++
 boards.cfg                     |    3 +-
 doc/README.cfi                 |   29 +++++++++++
 include/configs/digsy_mtc.h    |   27 +++++++++-
 6 files changed, 197 insertions(+), 6 deletions(-)
 create mode 100644 board/digsy_mtc/is45s16800a2.h
 create mode 100644 doc/README.cfi

diff --git a/MAINTAINERS b/MAINTAINERS
index 553930a..bd18f7b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -340,6 +340,10 @@ Denis Peter <d.peter at mpl.ch>
 	MIP405		PPC4xx
 	PIP405		PPC4xx
 
+Werner Pfister <Pfister_Werner at intercontrol.de>
+	digsy_mtc	mpc5200
+	digsy_mtc_rev5	mpc5200
+
 Kim Phillips <kim.phillips at freescale.com>
 
 	MPC8349EMDS	MPC8349
diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c
index cc6087b..afb0948 100644
--- a/board/digsy_mtc/digsy_mtc.c
+++ b/board/digsy_mtc/digsy_mtc.c
@@ -39,12 +39,29 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include "eeprom.h"
+#if defined(CONFIG_DIGSY_REV5)
+#include "is45s16800a2.h"
+#include <mtd/cfi_flash.h>
+#else
 #include "is42s16800a-7t.h"
+#endif
+#include <libfdt.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 extern int usb_cpu_init(void);
 
+#if defined(CONFIG_DIGSY_REV5)
+/*
+ * The M29W128GH needs a specail reset command function,
+ * details see the doc/README.cfi file
+ */
+void flash_cmd_reset(flash_info_t *info)
+{
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+}
+#endif
+
 #ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start(int hi_addr)
 {
@@ -175,6 +192,9 @@ int checkboard(void)
 	char *s = getenv("serial#");
 
 	puts ("Board: InterControl digsyMTC");
+#if defined(CONFIG_DIGSY_REV5)
+	puts (" rev5");
+#endif
 	if (s != NULL) {
 		puts(", ");
 		puts(s);
@@ -305,12 +325,97 @@ void ide_set_reset(int idereset)
 	setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
 }
 #endif /* CONFIG_IDE_RESET */
+#endif /* CONFIG_CMD_IDE */
 
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+static void ft_delete_node(void *fdt, const char *compat)
+{
+	int off = -1;
+	int ret;
+
+	off = fdt_node_offset_by_compatible(fdt, -1, compat);
+	if (off < 0) {
+		printf("Could not find %s node.\n", compat);
+		return;
+	}
+
+	ret = fdt_del_node(fdt, off);
+	if (ret < 0)
+		printf("Could not delete %s node.\n", compat);
+}
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+static void ft_adapt_flash_base(void *blob)
+{
+	flash_info_t	*dev = &flash_info[0];
+	int off;
+	struct fdt_property *prop;
+	int len;
+	u32 *reg, *reg2;
+
+	off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb");
+	if (off < 0) {
+		printf("Could not find fsl,mpc5200b-lpb node.\n");
+		return;
+	}
+
+	/* found compatible property */
+	prop = fdt_get_property_w(blob, off, "ranges", &len);
+	if (prop) {
+		reg = reg2 = (u32 *)&prop->data[0];
+
+		reg[2] = dev->start[0];
+		reg[3] = dev->size;
+		fdt_setprop(blob, off, "ranges", reg2, len);
+	} else
+		printf("Could not find ranges\n");
+}
+
+extern ulong flash_get_size (phys_addr_t base, int banknum);
+
+/* Update the Flash Baseaddr settings */
+int update_flash_size (int flash_size)
+{
+	volatile struct mpc5xxx_mmap_ctl *mm =
+		(struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
+	flash_info_t	*dev;
+	int	i;
+	int size = 0;
+	unsigned long base = 0x0;
+	u32 *cs_reg = (u32 *)&mm->cs0_start;
+
+	for (i = 0; i < 2; i++) {
+		dev = &flash_info[i];
+
+		if (dev->size) {
+			/* calculate new base addr for this chipselect */
+			base -= dev->size;
+			out_be32(cs_reg, START_REG(base));
+			cs_reg++;
+			out_be32(cs_reg, STOP_REG(base, dev->size));
+			cs_reg++;
+			/* recalculate the sectoraddr in the cfi driver */
+			size += flash_get_size(base, i);
+		}
+	}
+	gd->bd->bi_flashstart = base;
+	return 0;
+}
+#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
+
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
+	/*
+	 * There are 2 RTC nodes in the DTS, so remove
+	 * the unneeded node here.
+	 */
+#if defined(CONFIG_DIGSY_REV5)
+	ft_delete_node(blob, "dallas,ds1339");
+#else
+	ft_delete_node(blob, "mc,rv3029c2");
+#endif
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+	ft_adapt_flash_base(blob);
+#endif
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-#endif /* CONFIG_CMD_IDE */
diff --git a/board/digsy_mtc/is45s16800a2.h b/board/digsy_mtc/is45s16800a2.h
new file mode 100644
index 0000000..6ab5c12
--- /dev/null
+++ b/board/digsy_mtc/is45s16800a2.h
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * based on:
+ * (C) Copyright 2004-2009
+ * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_MODE	0x00CD0000
+#define SDRAM_CONTROL	0x50470000
+#define SDRAM_CONFIG1	0xD2322900
+#define SDRAM_CONFIG2	0x8AD70000
diff --git a/boards.cfg b/boards.cfg
index 94b8745..093c4c9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -239,8 +239,9 @@ BC3450                       powerpc     mpc5xxx     bc3450
 canmb                        powerpc     mpc5xxx
 cm5200                       powerpc     mpc5xxx
 digsy_mtc                    powerpc     mpc5xxx     digsy_mtc
-digsy_mtc_LOWBOOT            powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:SYS_TEXT_BASE=0xFF000000
 digsy_mtc_RAMBOOT            powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:SYS_TEXT_BASE=0x00100000
+digsy_mtc_rev5               powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:DIGSY_REV5
+digsy_mtc_rev5_RAMBOOT       powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5
 galaxy5200                   powerpc     mpc5xxx     galaxy5200          -              -           galaxy5200:galaxy5200
 galaxy5200_LOWBOOT           powerpc     mpc5xxx     galaxy5200          -              -           galaxy5200:galaxy5200_LOWBOOT
 icecube_5200                 powerpc     mpc5xxx     icecube             -              -           IceCube
diff --git a/doc/README.cfi b/doc/README.cfi
new file mode 100644
index 0000000..af5ae60
--- /dev/null
+++ b/doc/README.cfi
@@ -0,0 +1,29 @@
+The common CFI driver provides this weak default implementation for 
+flash_cmd_reset():
+
+void __flash_cmd_reset(flash_info_t *info)
+{
+	/*
+	 * We do not yet know what kind of commandset to use, so we issue
+	 * the reset command in both Intel and AMD variants, in the hope
+	 * that AMD flash roms ignore the Intel command.
+	 */
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+void flash_cmd_reset(flash_info_t *info)
+	__attribute__((weak,alias("__flash_cmd_reset")));
+
+
+Some flash chips seems to have trouble with this reset sequence. In this case 
+the board specific code can override this weak default version with a board 
+specific function. For example the digsy_mtc board equipped with the M29W128GH 
+from Numonyx needs this version to function properly:
+
+void flash_cmd_reset(flash_info_t *info)
+{
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+}
+
+see also:
+http://www.mail-archive.com/u-boot@lists.denx.de/msg24368.html
diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index d541160..bfbec6a 100644
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -249,9 +249,14 @@
 /*
  * RTC configuration
  */
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_I2C_RTC_ADDR	0x56
+#define CONFIG_RTC_RV3029
+#else
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #define CONFIG_SYS_DS1339_TCR_VAL	0xAB	/* diode + 4k resistor */
+#endif
 
 /*
  * Flash configuration
@@ -259,14 +264,24 @@
 #define	CONFIG_SYS_FLASH_CFI		1
 #define	CONFIG_FLASH_CFI_DRIVER	1
 
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_FLASH_BASE		0xFE000000
+#define CONFIG_SYS_FLASH_BASE_CS1	0xFC000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_CS1, \
+					CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+#else
 #define CONFIG_SYS_FLASH_BASE		0xFF000000
-#define CONFIG_SYS_FLASH_SIZE	0x01000000
-
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#endif
+
 #define CONFIG_SYS_MAX_FLASH_SECT	256
 #define CONFIG_FLASH_16BIT
 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_SIZE	0x01000000
 #define CONFIG_SYS_FLASH_ERASE_TOUT	240000
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
@@ -409,6 +424,12 @@
 #define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
 #define CONFIG_SYS_CS0_CFG		0x0002DD00
 
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE_CS1
+#define CONFIG_SYS_CS1_SIZE		CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_CFG		0x0002DD00
+#endif
+
 #define CONFIG_SYS_CS_BURST		0x00000000
 #define CONFIG_SYS_CS_DEADCYCLE	0x11111111
 
-- 
1.7.3.4



More information about the U-Boot mailing list