[U-Boot] uboot load ftb

[Scott Wood]

On Fri, 14 Jan 2011 09:44:44 +0800
张扬 <w90p710 at gmail.com> wrote:

> Dear Scott Wood
> 
> 2011/1/13 Scott Wood <scottwood at freescale.com>:
> > On Wed, 12 Jan 2011 09:00:52 +0100
> > Wolfgang Denk <wd at denx.de> wrote:
> >
> >> Dear =?UTF-8?B?5byg5oms?=,
> >>
> >> In message <AANLkTinUx-NmpundBm=scYeahCkBAd9=dx8B3rO7G9GN at mail.gmail.com> you wrote:
> >> >
> >> > > i trying to sue the kernel's Makefile rule, but the issue is not solved.
> >> >   WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND.
> >> >   ERROR: /chosen node create failed - must RESET the board to recover.
> >>
> >> Well, seems your device tree has some problem.
> >
> > My guess is it's an old U-Boot that can't create properties
> > in /chosen if /chosen doesn't already exist.
> > i use lastest version of  u-boot, booting process gives the error. but i use u-boot-1.3.0 that's ok.

OK, check whether you have a "serial0" alias (or "serial1" if using
what U-Boot thinks of as the second serial port, etc) in your device
tree.

-Scott