[U-Boot] [PATCH 0/4 V2] Add basic NVIDIA Tegra2 SoC support

[Peter Tyser]

Hi Tom,

On Fri, 2011-01-14 at 10:11 -0700, Tom Warren wrote:
> This series of patches adds preliminary/baseline support for NVIDIA's
> Tegra2 SoC.  Basic CPU (AVP), RAM and UART init are covered so that the
> system (Harmony or Seaboard) can boot to the U-Boot serial cmd prompt.
> 
> Further support (for Cortex-A9 CPU(s), USB, SD/MMC, etc.) to follow.
> 
> V2: Make changes based on feedback from Peter Tyser and Sandeep Paulraj.

If you didn't use all the feedback to the original patches, you should
state explicitly what you changed here, or respond to the original
comment email as to why they weren't made.  For example, I see you
didn't make the suggested change to use IO access functions, or allow
compiling out of support for UARTA and UARTD.  That should be made clear
somewhere (and the logic of why the changes weren't made) so that those
reviewing the patches know what changed between v1 and v2 and why.  As
is its unclear why the v1 comments weren't implemented, so they also
apply to this series.

Best,
Peter