[U-Boot] [PATCH] powerpc/85xx: Add default usb mode and phy type to hwconfig

Kumar Gala galak at kernel.crashing.org
Fri Jul 1 06:03:09 CEST 2011


From: ramneek mehresh <ramneek.mehresh at freescale.com>

Move to use hwconfig for usb mode & phy type instead of magic
'usb_phy_type' environment variable on the following platforms:

MPC8536DS, P1020RDB, P1020RDB-PC, P1010RDB, P2020RDB, P2020RDB-PC,
P2020RDB, P3041DS, P4080DS, & P5020DS.

Signed-off-by: Ramneek Mehresh <ramneek.mehresh at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 include/configs/MPC8536DS.h  |    3 ++-
 include/configs/P1_P2_RDB.h  |    2 +-
 include/configs/P2020DS.h    |    3 ++-
 include/configs/corenet_ds.h |    9 ++++++++-
 4 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 7f7ff9f..783ed51 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -262,6 +262,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
 
+#define CONFIG_HWCONFIG			/* enable hwconfig */
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
 #ifdef CONFIG_PHYS_64BIT
@@ -782,7 +783,7 @@
  "fdtaddr=c00000\0"				\
  "fdtfile=8536ds/mpc8536ds.dtb\0"		\
  "bdev=sda3\0"					\
- "usb_phy_type=ulpi\0"
+ "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 
 #define CONFIG_HDBOOT				\
  "setenv bootargs root=/dev/$bdev rw "		\
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 4f1bdfe..df88b79 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -689,7 +689,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 	"nandfdtaddr=80000\0"		\
 	"nandimgsize=400000\0"		\
 	"nandfdtsize=80000\0"		\
-	"usb_phy_type=ulpi\0"		\
+	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"	\
 	"vscfw_addr=ef000000\0"	\
 	"othbootargs=ramdisk_size=600000\0" \
 	"usbfatboot=setenv bootargs root=/dev/ram rw "	\
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index b5db0b3..90fe7c4 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -752,7 +752,8 @@
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "perf_mode=performance\0"			\
- "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1\0"	\
+	"hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1;"	\
+	"usb1:dr_mode=host,phy_type=ulpi\0"			\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
  "tftpflash=tftpboot $loadaddr $uboot; "			\
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 757a778..39d9b00 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -638,9 +638,16 @@
 
 #define CONFIG_BAUDRATE	115200
 
+#if defined(CONFIG_P4080DS)
+#define __USB_PHY_TYPE	ulpi
+#else
+#define __USB_PHY_TYPE	utmi
+#endif
+
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
-	"bank_intlv=cs0_cs1\0"					\
+	"bank_intlv=cs0_cs1;"					\
+	"usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
 	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"			\
 	"ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"			\
-- 
1.7.3.4



More information about the U-Boot mailing list