[U-Boot] [PATCH 1/4] Armada100: Ethernet support for Marvell gplugD

[Prafulla Wadaskar]

> -----Original Message-----
> From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
> Sent: Friday, July 08, 2011 11:53 AM
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de; Ajay Bhargav
> Subject: [PATCH 1/4] Armada100: Ethernet support for Marvell gplugD
> 
> This patch adds ethernet support for GuruPlug-Display. tftpboot and
> and other network related commands now works.
> 
> Signed-off-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
> ---
>  .gitignore                                      |    1 +
>  arch/arm/include/asm/arch-armada100/armada100.h |   39 ++
>  arch/arm/include/asm/arch-armada100/gpio.h      |   81 +++
>  arch/arm/include/asm/arch-armada100/mfp.h       |   19 +
>  board/Marvell/gplugd/gplugd.c                   |   77 +++
>  drivers/net/Makefile                            |    1 +
>  drivers/net/pxa168_eth.c                        |  815
> +++++++++++++++++++++++
>  drivers/net/pxa168_eth.h                        |  239 +++++++
>  include/configs/gplugd.h                        |   22 +-
>  include/netdev.h                                |    1 +

Spit this patch as
1. gpio: Add GPIO driver for Armada100
2. net: Add Fast Ethernet controller driver for Armada100
3. Armada100: Enable 88E3015 PHY support on GplugD
4. Armada100: Enable Ethernet support on GplugD

Also please mentioned the dependency of this code i.e. Gplugd patch which is not yet mainlined.

Regards..
Prafulla . .