[U-Boot] [GIT PULL] mpc83xx: new MergerBox board + minor fixes

[Wolfgang Denk]

Dear Kim Phillips,

In message <20110706192221.4497ca2d.kim.phillips at freescale.com> you wrote:
> Wolfgang Denk,
> 
> Please pull new MergerBox board + minor fixes for 83xx for u-boot
> v2011.09:
> 
> The following changes since commit 79642098a8345e2506ab0ff02e8c7ac4da405d0c:
> 
>   Add support for Network Space v2 and parents (2011-07-04 10:55:28 +0200)
> 
> are available in the git repository at:
>   git://git.denx.de/u-boot-mpc83xx.git master
> 
> Andre Schwarz (4):
>       MPC837x: set i2c1_clk
>       MPC83xx: add define for global half-strength enable (HSE)
>       MPC83xx: add config options for memory setup.
>       mpc83xx: Add support for MergerBox board
> 
> Bill Cook (1):
>       MPC83XX: Fix PCI express clock setup
> 
> Ira W. Snyder (1):
>       fsl_dma: fix support for 83xx DMA engine
> 
> Timur Tabi (1):
>       powerpc/83xx: remove empty board_early_init_f()
> 
>  MAINTAINERS                               |    1 +
>  arch/powerpc/cpu/mpc83xx/spd_sdram.c      |   19 +-
>  arch/powerpc/cpu/mpc83xx/speed.c          |    8 +-
>  board/freescale/mpc8323erdb/mpc8323erdb.c |    5 -
>  board/freescale/mpc8360erdk/mpc8360erdk.c |    5 -
>  board/matrix_vision/mergerbox/Makefile    |   51 +++
>  board/matrix_vision/mergerbox/fpga.c      |  175 ++++++++
>  board/matrix_vision/mergerbox/fpga.h      |   30 ++
>  board/matrix_vision/mergerbox/mergerbox.c |  241 +++++++++++
>  board/matrix_vision/mergerbox/mergerbox.h |   67 +++
>  board/matrix_vision/mergerbox/pci.c       |  134 +++++++
>  board/matrix_vision/mergerbox/sm107.c     |  126 ++++++
>  boards.cfg                                |    1 +
>  doc/README.mergerbox                      |   59 +++
>  drivers/dma/fsl_dma.c                     |    2 +
>  include/configs/MERGERBOX.h               |  619 +++++++++++++++++++++++++++++
>  include/configs/MPC8323ERDB.h             |    2 -
>  include/configs/MPC8360ERDK.h             |    1 -
>  include/mpc83xx.h                         |    1 +
>  19 files changed, 1531 insertions(+), 16 deletions(-)
>  create mode 100644 board/matrix_vision/mergerbox/Makefile
>  create mode 100644 board/matrix_vision/mergerbox/fpga.c
>  create mode 100644 board/matrix_vision/mergerbox/fpga.h
>  create mode 100644 board/matrix_vision/mergerbox/mergerbox.c
>  create mode 100644 board/matrix_vision/mergerbox/mergerbox.h
>  create mode 100644 board/matrix_vision/mergerbox/pci.c
>  create mode 100644 board/matrix_vision/mergerbox/sm107.c
>  create mode 100644 doc/README.mergerbox
>  create mode 100644 include/configs/MERGERBOX.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A wise person makes his  own  decisions,  a  weak  one  obeys  public
opinion.                                           -- Chinese proverb