[U-Boot] [Patch v2 1/2] powerpc/mpc8xxx: Enable calculation for fixed DDR chips

[Kumar Gala]

On Jun 6, 2011, at 8:42 PM, York Sun wrote:

> We used to have fixed parameters for soldered DDR chips. This patch introduces
> CONFIG_SYS_DDR_RAW_TIMING to enable calculation based on timing data from DDR
> chip datasheet, implemneted in board-specific files or header files.
> 
> Signed-off-by: York Sun <yorksun at freescale.com>
> ---
> README                                |    6 ++++++
> arch/powerpc/cpu/mpc85xx/cpu.c        |    4 +++-
> arch/powerpc/cpu/mpc8xxx/ddr/Makefile |   13 +++++++++++--
> arch/powerpc/cpu/mpc8xxx/ddr/ddr.h    |    9 +++++++++
> arch/powerpc/cpu/mpc8xxx/ddr/main.c   |   12 ++++++++++++
> 5 files changed, 41 insertions(+), 3 deletions(-)

applied to 85xx

- k