[U-Boot] Ping command

[Wolfgang Denk]

Dear smitha.vanga at wipro.com,

please stop top posting/ full quoting.  You can find hints here:
http://www.netmeister.org/news/learn2quote.html

In message <07ACDFB8ECA8EF47863A613BC01BBB22032BC8BF at HYD-MKD-MBX02.wipro.com> you wrote:
> 
> I get the below messages. Its failing in the fec_send BD_ENET_TX_READY
> bit is not getting set.
> Any clue?

Check your clock routing.  Eventually you have misconfigured the Tx
clock.

> > >ping 172.16.52.20
> > Using unknown device
> > ping failed; host 172.16.52.20 is not alive
> 
> Check the source code and find out why ping reports an "unknown device".

Did you solve this "unknown device" issue?  THis must be done first.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Very ugly or very beautiful women should be flattered on their
understanding, and mediocre ones on their beauty.
                                       -- Philip Earl of Chesterfield