[U-Boot] [PATCH] nand: increase chip_delay in mv kirkwood nand driver

[Holger Brunck]

From: Stefan Bigler <stefan.bigler at keymile.com>

The new SAMSUNG NAND Flash K9F1G08U0D require a bigger chip_delay.
The Data Transfer from Cell to Register is >= 35us. Other Vendors
and older chips normally use >= 25us. To have enough margin 40us
is selected.

Signed-off-by: Stefan Bigler <stefan.bigler at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
cc: Prafulla Wadaskar <prafulla at marvell.com>
cc: Stefan Roese <sr at denx.de>

---
 drivers/mtd/nand/kirkwood_nand.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c
index 376378e..bdab5aa 100644
--- a/drivers/mtd/nand/kirkwood_nand.c
+++ b/drivers/mtd/nand/kirkwood_nand.c
@@ -76,7 +76,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->cmd_ctrl = kw_nand_hwcontrol;
-	nand->chip_delay = 30;
+	nand->chip_delay = 40;
 	nand->select_chip = kw_nand_select_chip;
 	return 0;
 }
-- 
1.7.1