[U-Boot] [PATCH] phy.c: make less verbose - turn printf() into debug()

[Kumar Gala]

On Jul 25, 2011, at 2:39 AM, Wolfgang Denk wrote:

> The PHY driver was too verbose and corrupted the boot message display
> like this:
> 
> 	...
> 	Net:   TSEC0 connected to Marvell 88E1111S
> 	TSEC1 connected to Marvell 88E1111S
> 	TSEC0, TSEC1
> 	...
> 
> Turn printf() into debug() so we het the expected output again:
> 
> 	...
> 	Net:   TSEC0, TSEC1
> 	...
> 
> Signed-off-by: Wolfgang Denk <wd at denx.de>
> Cc: Kumar Gala <galak at kernel.crashing.org>
> 
> ---
> drivers/net/phy/phy.c |    2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index c7edcc0..ce69c19 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -714,7 +714,7 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
> 
> 	phydev->dev = dev;
> 
> -	printf("%s connected to %s\n", dev->name, phydev->drv->name);
> +	debug("%s connected to %s\n", dev->name, phydev->drv->name);
> 
> 	return phydev;
> }
> -- 
> 1.7.6

Andy,

Any comments?

- k