[U-Boot] [PATCH V0] omap-common: move early UART clock setup to s_init

[Andreas Bießmann]

Hi Simon,

Am 28.07.2011 11:22, schrieb Simon Schwarz:
> Moves the early UART clock setup setup_clocks_for_console() from
> preloader_console_init() to s_init() of OMAP4.

I recommend putting this in your 'devkit8000 nand_spl support' series
before the current '2/5 omap-common: add nand_spl support' and remove
the '#ifdef CONFIG_OMAP34XX' in that patch. Albert how do you think
about this?

> Signed-off-by: Simon Schwarz <simonschwarzcor at gmail.com>
> ---
>  arch/arm/cpu/armv7/omap-common/spl.c |    1 -
>  arch/arm/cpu/armv7/omap4/board.c     |    1 +
>  2 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
> index d177652..d380b3e 100644
> --- a/arch/arm/cpu/armv7/omap-common/spl.c
> +++ b/arch/arm/cpu/armv7/omap-common/spl.c
> @@ -259,7 +259,6 @@ void preloader_console_init(void)

I recommend adding some comment for preloader_console_init() saying
'this requires UART clocks to be enabled before' in this patch.

>  	gd->flags |= GD_FLG_RELOC;
>  	gd->baudrate = CONFIG_BAUDRATE;
>  
> -	setup_clocks_for_console();
>  	serial_init();		/* serial communications setup */
>  
>  	/* Avoid a second "U-Boot" coming from this string */

regards

Andreas Bießmann