[U-Boot] [PATCH 0/1 v3] Dreamplug support

[u-boot at lakedaemon.net]

From: Jason Cooper <u-boot at lakedaemon.net>

It compiles clean, and I've loaded it via JTAG and used it to dump the
existing bootloader out of the SPI flash.  I have _not_ used it to burn
itself to the flash yet.  I'm looking for comments before I try that. ;-)

Some concerns:

	- The SPI flash chip is a Macronix MX25L1606, however it has the
	  identical chip idcode to the MX25L1605.  How is that properly
	  handled?  The 06 does have some new features [1].

[1] http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/5F41CDDCB837422C48257639003E5EC3/$File/AN055-Migrate_to_MX25L1606E_and_MX25L8006E-1.2.pdf


Changes from v1 to v2:

	- resorted series to move 'make all' support last.

Changes from v2 to v3:

	- Use MACH_TYPE_GURUPLUG for now until dreamplug support is in Linux.
	- Update MAINTAINERS.
	- Collapse into one patch



Jason Cooper (1):
  dreamplug: Initial support.

 MAINTAINERS                          |    1 +
 MAKEALL                              |    1 +
 board/Marvell/dreamplug/Makefile     |   51 +++++++++++
 board/Marvell/dreamplug/dreamplug.c  |  154 ++++++++++++++++++++++++++++++++
 board/Marvell/dreamplug/dreamplug.h  |   39 ++++++++
 board/Marvell/dreamplug/kwbimage.cfg |  160 ++++++++++++++++++++++++++++++++++
 boards.cfg                           |    1 +
 include/configs/dreamplug.h          |  111 +++++++++++++++++++++++
 8 files changed, 518 insertions(+), 0 deletions(-)
 create mode 100644 board/Marvell/dreamplug/Makefile
 create mode 100644 board/Marvell/dreamplug/dreamplug.c
 create mode 100644 board/Marvell/dreamplug/dreamplug.h
 create mode 100644 board/Marvell/dreamplug/kwbimage.cfg
 create mode 100644 include/configs/dreamplug.h