[U-Boot] [PATCH v2 0/5] Add basic clock and pinmux functions to the Tegra2

[Simon Glass]

Hi,

On Mon, Jun 13, 2011 at 4:38 PM, Simon Glass <sjg at chromium.org> wrote:
> This patch series adds basic clock and pinmux functions to the Tegra2, and
> modifies the ap20 and board code to use them. It includes a few very simple
> required bitfield helper macros for ARM Tegra2 only.
>
> Changes for v2:
> - Removed use of bitfield macros in C code
> - Now uses manual shifts and masks
>
> Simon Glass (5):
>  Tegra2: Add macros to calculate bitfield shifts and masks
>  Tegra2: Add microsecond timer functions
>  Tegra2: Add more clock support
>  Tegra2: add additional pin multiplexing features
>  Tegra2: Use clock and pinmux functions to simplify code
>

Is everyone OK with this patch set? Should I resend? Now that the GPIO
code is in, this can go in also.

Regards,
Simon

>  arch/arm/cpu/armv7/tegra2/Makefile          |    2 +-
>  arch/arm/cpu/armv7/tegra2/ap20.c            |   91 +++-------
>  arch/arm/cpu/armv7/tegra2/clock.c           |  158 ++++++++++++++++
>  arch/arm/cpu/armv7/tegra2/pinmux.c          |   53 ++++++
>  arch/arm/cpu/armv7/tegra2/timer.c           |   27 ++-
>  arch/arm/include/asm/arch-tegra2/bitfield.h |   96 ++++++++++
>  arch/arm/include/asm/arch-tegra2/clk_rst.h  |  140 +++++++-------
>  arch/arm/include/asm/arch-tegra2/clock.h    |  264 +++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-tegra2/pinmux.h   |  155 +++++++++++++++-
>  arch/arm/include/asm/arch-tegra2/timer.h    |   34 ++++
>  board/nvidia/common/board.c                 |   64 +++----
>  11 files changed, 893 insertions(+), 191 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/tegra2/clock.c
>  create mode 100644 arch/arm/cpu/armv7/tegra2/pinmux.c
>  create mode 100644 arch/arm/include/asm/arch-tegra2/bitfield.h
>  create mode 100644 arch/arm/include/asm/arch-tegra2/clock.h
>  create mode 100644 arch/arm/include/asm/arch-tegra2/timer.h
>
> --
> 1.7.3.1
>
>