[U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table

[Jason Kridner]

A simple addition to the revision IDs.

This patch depends upon http://patchwork.ozlabs.org/patch/85303/.

Signed-off-by: Jason Kridner <jkridner at beagleboard.org>
---
 board/ti/beagle/beagle.c |   12 ++++++++++++
 board/ti/beagle/beagle.h |    1 +
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 905b151..0596443 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -168,6 +168,7 @@ void display_init(void)
 		break;
 	case REVISION_XM_A:
 	case REVISION_XM_B:
+	case REVISION_XM_C:
 	default:
 		omap3_dss_panel_config(&dvid_cfg_xm);
 		break;
@@ -227,6 +228,16 @@ int misc_init_r(void)
 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
 		break;
+	case REVISION_XM_C:
+		printf("Beagle xM Rev C\n");
+		setenv("beaglerev", "xMC");
+		MUX_BEAGLE_XM();
+		/* Set VAUX2 to 1.8V for EHCI PHY */
+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
+		break;
 	default:
 		printf("Beagle unknown 0x%02x\n", get_board_revision());
 		MUX_BEAGLE_XM();
@@ -372,6 +383,7 @@ int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		break;
 	case REVISION_XM_A:
 	case REVISION_XM_B:
+	case REVISION_XM_C:
 	default:
 		gpio = 4;
 		break;
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index bdf2a6f..f31ce31 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -41,6 +41,7 @@ const omap3_sysinfo sysinfo = {
 #define REVISION_C4	0x5
 #define REVISION_XM_A	0x0
 #define REVISION_XM_B	0x1
+#define REVISION_XM_C	0x2
 
 /*
  * IEN  - Input Enable
-- 
1.5.6.4