[U-Boot] Please pull u-boot-ti/master

s-paulraj at ti.com s-paulraj at ti.com
Thu Nov 3 21:11:47 CET 2011


The following changes since commit 6d66073614539d94dabff1f63ebd962840c44b81:
  Thomas Herzmann (1):
        arm/km: portl2 environment address update to P1B

are available in the git repository at:

  git://git.denx.de/u-boot-ti.git master

Bastian Ruppert (4):
      Davinci: ea20: set console on UART0
      Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console
      Davinci: ea20: add gpio for keeping power on in board_late_init
      Davinci: ea20: add gpios for LCD backlight control

Christian Riesch (1):
      arm, davinci: Add function lpsc_syncreset()

Heiko Schocher (13):
      arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
      arm, arm926: fix missing symbols in NAND_SPL mode
      usb, davinci: add enable_vbus() weak function
      arm, usb, davinci: make USBPHY_CTL register configurable
      net, davinci_emac: make clock divider in MDIO control register configurable
      spl: add option for adding post memory test to the SPL framework
      arm, davinci: add support for new spl framework
      spl, nand: add 4bit HW ecc oob first nand_read_page function
      arm, davinci: add header files for dm365
      arm, davinci: add lowlevel function for dm365 soc
      arm926ejs, davinci: add cpuinfo for dm365
      arm926ejs, davinci: add missing spi defines for dm365
      arm, davinci: add cam_enc_4xx support

Ilya Yanok (2):
      davinci_emac: compilation fix, phy is array now
      omap/spl: actually enable the console

Sanjeev Premi (7):
      omap3evm: Set environment variable 'ethaddr'
      omap3evm: Reorder related config options
      omap3evm: Prepare to split configuration
      omap3evm: move common config options to new file
      omap3evm: Add (quick) configuration for MMC/SD only
      omap3evm: Add (quick) configuration for NAND only
      omap3evm: fix errors caused by multiple definitions

Stefano Babic (8):
      Davinci: ea20: Add NAND support
      Davinci: ea20: Add early init to get early output from console
      Davinci: ea20: Add default U-Boot environment
      ARM: Davinci: added missing registers to hardware.h
      VIDEO: davinci: add framebuffer to da8xx
      Davinci: ea20: added video support
      Davinci: ea20: added I2C support
      Davinci: ea20: added PREBOOT to configuration

 MAINTAINERS                                        |    1 +
 Makefile                                           |    8 +-
 README                                             |    5 +
 arch/arm/cpu/arm926ejs/davinci/Makefile            |    5 +
 arch/arm/cpu/arm926ejs/davinci/cpu.c               |   27 +-
 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c    |  439 ++++++++++
 arch/arm/cpu/arm926ejs/davinci/psc.c               |   20 +-
 arch/arm/cpu/arm926ejs/davinci/spl.c               |   63 ++
 arch/arm/cpu/arm926ejs/start.S                     |   31 +-
 arch/arm/cpu/armv7/omap-common/spl.c               |    2 +
 arch/arm/include/asm/arch-davinci/aintc_defs.h     |   50 ++
 arch/arm/include/asm/arch-davinci/da8xx-fb.h       |  126 +++
 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h |   41 +
 arch/arm/include/asm/arch-davinci/hardware.h       |   27 +-
 arch/arm/include/asm/arch-davinci/pll_defs.h       |   84 ++
 arch/arm/include/asm/arch-davinci/psc_defs.h       |   86 ++
 arch/arm/include/asm/arch-davinci/syscfg_defs.h    |   66 ++
 board/ait/cam_enc_4xx/Makefile                     |   46 ++
 board/ait/cam_enc_4xx/cam_enc_4xx.c                |  446 +++++++++++
 board/ait/cam_enc_4xx/config.mk                    |   15 +
 board/ait/cam_enc_4xx/u-boot-spl.lds               |   73 ++
 board/ait/cam_enc_4xx/ublimage.cfg                 |   48 ++
 board/davinci/common/misc.c                        |    2 +-
 board/davinci/ea20/ea20.c                          |  205 ++++-
 board/ti/evm/evm.c                                 |   15 +
 boards.cfg                                         |    3 +
 doc/README.SPL                                     |    2 +
 doc/README.davinci.nand_spl                        |  141 ++++
 drivers/mtd/nand/Makefile                          |    3 +
 drivers/mtd/nand/nand_spl_load.c                   |   56 ++
 drivers/mtd/nand/nand_spl_simple.c                 |   43 +-
 drivers/net/davinci_emac.c                         |   11 +-
 drivers/usb/musb/davinci.c                         |   20 +-
 drivers/video/Makefile                             |    1 +
 drivers/video/da8xx-fb.c                           |  846 ++++++++++++++++++++
 include/configs/cam_enc_4xx.h                      |  453 +++++++++++
 include/configs/ea20.h                             |  126 +++-
 include/configs/omap3_evm.h                        |  331 ++-------
 include/configs/omap3_evm_common.h                 |  292 +++++++
 include/configs/omap3_evm_quick_mmc.h              |   91 +++
 include/configs/omap3_evm_quick_nand.h             |   79 ++
 spl/Makefile                                       |    1 +
 tools/ublimage.h                                   |    2 +-
 43 files changed, 4098 insertions(+), 334 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/spl.c
 create mode 100644 arch/arm/include/asm/arch-davinci/aintc_defs.h
 create mode 100644 arch/arm/include/asm/arch-davinci/da8xx-fb.h
 create mode 100644 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h
 create mode 100644 arch/arm/include/asm/arch-davinci/pll_defs.h
 create mode 100644 arch/arm/include/asm/arch-davinci/psc_defs.h
 create mode 100644 arch/arm/include/asm/arch-davinci/syscfg_defs.h
 create mode 100644 board/ait/cam_enc_4xx/Makefile
 create mode 100644 board/ait/cam_enc_4xx/cam_enc_4xx.c
 create mode 100644 board/ait/cam_enc_4xx/config.mk
 create mode 100644 board/ait/cam_enc_4xx/u-boot-spl.lds
 create mode 100644 board/ait/cam_enc_4xx/ublimage.cfg
 create mode 100644 doc/README.davinci.nand_spl
 create mode 100644 drivers/mtd/nand/nand_spl_load.c
 create mode 100644 drivers/video/da8xx-fb.c
 create mode 100644 include/configs/cam_enc_4xx.h
 create mode 100644 include/configs/omap3_evm_common.h
 create mode 100644 include/configs/omap3_evm_quick_mmc.h
 create mode 100644 include/configs/omap3_evm_quick_nand.h


More information about the U-Boot mailing list