[U-Boot] [PATCH 1/4] qong: Use generic function for configuring GPR register

[Fabio Estevam]

Use generic function for configuring GPR register.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/davedenx/qong/qong.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index 665aedf..c41f11d 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -231,7 +231,7 @@ static void board_nand_setup(void)
 
 	mxc_setup_weimcs(3, &cs3);
 
-	__REG(IOMUXC_GPR) |= 1 << 13;
+	mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1);
 
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO));
 	mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO));
-- 
1.7.1