[U-Boot] [PATCH 0/5] mx5: USB host support for mx51evk and mx53loco

[Marek Vasut]

> This patches series provides USB host support for the mx51evk and
> mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc
> and uses the header files of the ehci-fsl interface. The callback
> board_ehci_hcd_init() allows to do board-specific setup when USB is
> started.
> 
> Wolfgang.
> 
> Wolfgang Grandegger (5):
>   mx5: add helper functions to enable USB clocks
>   mx5: add helper function to retrieve the GPIO number
>   mx5: add generic USB EHCI support for mx51 and mx53
>   mx53loco: add end enable USB host support on port 1
>   mx51evk: add end enable USB host support on port 1
> 
>  arch/arm/cpu/armv7/mx5/clock.c            |   72 ++++++++++++
>  arch/arm/include/asm/arch-mx5/clock.h     |    5 +
>  arch/arm/include/asm/arch-mx5/crm_regs.h  |    3 +
>  arch/arm/include/asm/arch-mx5/mx5x_pins.h |    4 +
>  board/freescale/mx51evk/mx51evk.c         |   92 +++++++++++++++
>  board/freescale/mx53loco/mx53loco.c       |   10 ++
>  drivers/usb/host/Makefile                 |    1 +
>  drivers/usb/host/ehci-mx5.c               |  174
> +++++++++++++++++++++++++++++ include/configs/mx51evk.h                 | 
>  13 ++
>  include/configs/mx53loco.h                |   13 ++
>  include/usb/ehci-fsl.h                    |   10 ++
>  11 files changed, 397 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/usb/host/ehci-mx5.c

Hi,

isn't Jana already doing this kind of USB support for mx5 based on my old 
patches? You didn't notice?

M