[U-Boot] [PATCH 03/13] MX3: qong: use new pmic driver

Stefano Babic sbabic at denx.de
Sat Oct 8 18:35:59 CEST 2011


Switch to new pmic generic driver.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 board/davedenx/qong/qong.c |   11 ++++++++---
 include/configs/qong.h     |    5 ++++-
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index 9fca1f8..a9f2ef0 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -28,6 +28,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <nand.h>
+#include <pmic.h>
 #include <fsl_pmic.h>
 #include <asm/gpio.h>
 #include "qong_fpga.h"
@@ -176,11 +177,15 @@ int board_init (void)
 int board_late_init(void)
 {
 	u32 val;
+	struct pmic *p;
+
+	pmic_init();
+	p = get_pmic();
 
 	/* Enable RTC battery */
-	val = pmic_reg_read(REG_POWER_CTL0);
-	pmic_reg_write(REG_POWER_CTL0, val | COINCHEN);
-	pmic_reg_write(REG_INT_STATUS1, RTCRSTI);
+	pmic_reg_read(p, REG_POWER_CTL0, &val);
+	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
+	pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
 
 #ifdef CONFIG_HW_WATCHDOG
 	mxc_hw_watchdog_enable();
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 78b3701..ec99021 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -60,11 +60,14 @@
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_RTC_MC13783
 
-#define CONFIG_FSL_PMIC
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	100000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_BITLEN	32
 
 /* FPGA */
 #define CONFIG_FPGA
-- 
1.7.1



More information about the U-Boot mailing list