[U-Boot] [PATCH v6 3/5] tegra2: Move board_mmc_init into board files

Stephen Warren swarren at nvidia.com
Thu Oct 13 00:53:07 CEST 2011


For Seaboard, this is mostly a cut/paste of board_mmc_init() and
pin_mux_mmc() into seaboard.c; pin_mux_mmc() was modified to add some
missing pinmux_tristate_disable calls for the GPIOs.

For Harmony, those functions were modified to configure SDMMC2 (index 2)
instead of SDMMC3 (index 1), since that's what is present on the board.

However, harmony.c is still missing the required GPIO setup, so neither
port is likely to function correctly yet.  This will be fixed in the next
change.

v4: Include board.h to prototype tegra2_mmc_init().

Signed-off-by: Stephen Warren <swarren at nvidia.com>
Tested-by: Simon Glass <sjg at chromium.org>
Acked-by: Simon Glass <sjg at chromium.org>
---
 board/nvidia/common/board.c      |   52 -----------------------------------
 board/nvidia/harmony/harmony.c   |   56 ++++++++++++++++++++++++++++++++++++++
 board/nvidia/seaboard/seaboard.c |   53 +++++++++++++++++++++++++++++++++++
 3 files changed, 109 insertions(+), 52 deletions(-)

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 370a259..0f12de2 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -33,10 +33,6 @@
 #include <asm/arch/uart.h>
 #include "board.h"
 
-#ifdef CONFIG_TEGRA2_MMC
-#include <mmc.h>
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 const struct tegra2_sysinfo sysinfo = {
@@ -100,33 +96,6 @@ static void pin_mux_uart(void)
 #endif	/* CONFIG_TEGRA2_ENABLE_UARTD */
 }
 
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-static void pin_mux_mmc(void)
-{
-	/* SDMMC4: config 3, x8 on 2nd set of pins */
-	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
-	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
-	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
-
-	pinmux_tristate_disable(PINGRP_ATB);
-	pinmux_tristate_disable(PINGRP_GMA);
-	pinmux_tristate_disable(PINGRP_GME);
-
-	/* SDMMC3: SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
-	pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
-	pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
-	pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
-
-	pinmux_tristate_disable(PINGRP_SDC);
-	pinmux_tristate_disable(PINGRP_SDD);
-	pinmux_tristate_disable(PINGRP_SDB);
-}
-#endif
-
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -142,27 +111,6 @@ int board_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_TEGRA2_MMC
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-	gpio_config_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 4-bit bus */
-	tegra2_mmc_init(0, 4);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 1, SD slot, with 4-bit bus */
-	tegra2_mmc_init(1, 4);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index cbb30d6..f2c3867 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -24,9 +24,11 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/tegra2.h>
+#include <asm/arch/pinmux.h>
 #ifdef CONFIG_TEGRA2_MMC
 #include <mmc.h>
 #endif
+#include "../common/board.h"
 
 /*
  * Routine: gpio_config_uart
@@ -38,6 +40,39 @@ void gpio_config_uart(void)
 
 #ifdef CONFIG_TEGRA2_MMC
 /*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+	/* SDMMC4: config 3, x8 on 2nd set of pins */
+	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+
+	pinmux_tristate_disable(PINGRP_ATB);
+	pinmux_tristate_disable(PINGRP_GMA);
+	pinmux_tristate_disable(PINGRP_GME);
+
+	/* For power GPIO PI6 */
+	pinmux_tristate_disable(PINGRP_ATA);
+	/* For CD GPIO PH2 */
+	pinmux_tristate_disable(PINGRP_ATD);
+
+	/* SDMMC2: SDIO2_CLK, SDIO2_CMD, SDIO2_DAT[7:0] */
+	pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
+	pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
+
+	pinmux_tristate_disable(PINGRP_DTA);
+	pinmux_tristate_disable(PINGRP_DTD);
+
+	/* For power GPIO PT3 */
+	pinmux_tristate_disable(PINGRP_DTB);
+	/* For CD GPIO PI5 */
+	pinmux_tristate_disable(PINGRP_ATC);
+}
+
+/*
  * Routine: gpio_config_mmc
  * Description: Set GPIOs for SD card
  */
@@ -47,6 +82,27 @@ void gpio_config_mmc(void)
 }
 
 /* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	debug("board_mmc_init called\n");
+
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+	gpio_config_mmc();
+
+	debug("board_mmc_init: init SD slot J26\n");
+	/* init dev 0, SD slot J26, with 4-bit bus */
+	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
+	tegra2_mmc_init(0, 4);
+
+	debug("board_mmc_init: init SD slot J5\n");
+	/* init dev 2, SD slot J5, with 4-bit bus */
+	tegra2_mmc_init(2, 4);
+
+	return 0;
+}
+
+/* this is a weak define that we are overriding */
 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	debug("board_mmc_getcd called\n");
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index bc67d0f..22a0e69 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -24,10 +24,12 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/tegra2.h>
+#include <asm/arch/pinmux.h>
 #include <asm/gpio.h>
 #ifdef CONFIG_TEGRA2_MMC
 #include <mmc.h>
 #endif
+#include "../common/board.h"
 
 /*
  * Routine: gpio_config_uart
@@ -56,6 +58,36 @@ void gpio_config_uart(void)
 
 #ifdef CONFIG_TEGRA2_MMC
 /*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+	/* SDMMC4: config 3, x8 on 2nd set of pins */
+	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+
+	pinmux_tristate_disable(PINGRP_ATB);
+	pinmux_tristate_disable(PINGRP_GMA);
+	pinmux_tristate_disable(PINGRP_GME);
+
+	/* SDMMC3: SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
+	pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
+	pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
+	pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
+
+	pinmux_tristate_disable(PINGRP_SDC);
+	pinmux_tristate_disable(PINGRP_SDD);
+	pinmux_tristate_disable(PINGRP_SDB);
+
+	/* For power GPIO PI6 */
+	pinmux_tristate_disable(PINGRP_ATA);
+	/* For CD GPIO PI5 */
+	pinmux_tristate_disable(PINGRP_ATC);
+}
+
+/*
  * Routine: gpio_config_mmc
  * Description: Set GPIOs for SDMMC3 SDIO slot.
  */
@@ -69,6 +101,27 @@ void gpio_config_mmc(void)
 }
 
 /* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	debug("board_mmc_init called\n");
+
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+	gpio_config_mmc();
+
+	debug("board_mmc_init: init eMMC\n");
+	/* init dev 0, eMMC chip, with 4-bit bus */
+	/* The board has an 8-bit bus, but 8-bit doesn't work yet */
+	tegra2_mmc_init(0, 4);
+
+	debug("board_mmc_init: init SD slot\n");
+	/* init dev 1, SD slot, with 4-bit bus */
+	tegra2_mmc_init(1, 4);
+
+	return 0;
+}
+
+/* this is a weak define that we are overriding */
 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	debug("board_mmc_getcd called\n");
-- 
1.7.0.4



More information about the U-Boot mailing list