[U-Boot] [PATCH v2 1/5] davinci : move clock related functions to new file

manjunath.hadli at ti.com manjunath.hadli at ti.com
Mon Oct 17 10:01:40 CEST 2011


From: Manjunath Hadli <manjunath.hadli at ti.com>

move the functions related to clock from cpu.c to the new file
speed.c. Removed volatile where ever possible and replaced REG
instructions by readl.

Signed-off-by: Manjunath Hadli <manjunath.hadli at ti.com>
---
 arch/arm/cpu/arm926ejs/davinci/Makefile |    2 +-
 arch/arm/cpu/arm926ejs/davinci/cpu.c    |  185 -----------------------------
 arch/arm/cpu/arm926ejs/davinci/speed.c  |  197 +++++++++++++++++++++++++++++++
 3 files changed, 198 insertions(+), 186 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/speed.c

diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index 0310957..12457ea 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS-y				+= cpu.o timer.o psc.o
+COBJS-y				+= cpu.o timer.o psc.o speed.o
 COBJS-$(CONFIG_AM18018_LOWLEVEL)       += am1808_lowlevel.o
 COBJS-$(CONFIG_SOC_DM355)	+= dm355.o
 COBJS-$(CONFIG_SOC_DM365)	+= dm365.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c
index 02819f6..c2f72d6 100644
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c
@@ -22,191 +22,6 @@
 
 #include <common.h>
 #include <netdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-/* offsets from PLL controller base */
-#define PLLC_PLLCTL	0x100
-#define PLLC_PLLM	0x110
-#define PLLC_PREDIV	0x114
-#define PLLC_PLLDIV1	0x118
-#define PLLC_PLLDIV2	0x11c
-#define PLLC_PLLDIV3	0x120
-#define PLLC_POSTDIV	0x128
-#define PLLC_BPDIV	0x12c
-#define PLLC_PLLDIV4	0x160
-#define PLLC_PLLDIV5	0x164
-#define PLLC_PLLDIV6	0x168
-#define PLLC_PLLDIV7	0x16c
-#define PLLC_PLLDIV8	0x170
-#define PLLC_PLLDIV9	0x174
-
-#define BIT(x)		(1 << (x))
-
-/* SOC-specific pll info */
-#ifdef CONFIG_SOC_DM355
-#define ARM_PLLDIV	PLLC_PLLDIV1
-#define DDR_PLLDIV	PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DM644X
-#define ARM_PLLDIV	PLLC_PLLDIV2
-#define DSP_PLLDIV	PLLC_PLLDIV1
-#define DDR_PLLDIV	PLLC_PLLDIV2
-#endif
-
-#ifdef CONFIG_SOC_DM646X
-#define DSP_PLLDIV	PLLC_PLLDIV1
-#define ARM_PLLDIV	PLLC_PLLDIV2
-#define DDR_PLLDIV	PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DA8XX
-unsigned int sysdiv[9] = {
-	PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
-	PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
-};
-
-int clk_get(enum davinci_clk_ids id)
-{
-	int pre_div;
-	int pllm;
-	int post_div;
-	int pll_out;
-	unsigned int pll_base;
-
-	pll_out = CONFIG_SYS_OSCIN_FREQ;
-
-	if (id == DAVINCI_AUXCLK_CLKID)
-		goto out;
-
-	if ((id >> 16) == 1)
-		pll_base = (unsigned int)davinci_pllc1_regs;
-	else
-		pll_base = (unsigned int)davinci_pllc0_regs;
-
-	id &= 0xFFFF;
-
-	/*
-	 * Lets keep this simple. Combining operations can result in
-	 * unexpected approximations
-	 */
-	pre_div = (readl(pll_base + PLLC_PREDIV) &
-		DAVINCI_PLLC_DIV_MASK) + 1;
-	pllm = readl(pll_base + PLLC_PLLM) + 1;
-
-	pll_out /= pre_div;
-	pll_out *= pllm;
-
-	if (id == DAVINCI_PLLM_CLKID)
-		goto out;
-
-	post_div = (readl(pll_base + PLLC_POSTDIV) &
-		DAVINCI_PLLC_DIV_MASK) + 1;
-
-	pll_out /= post_div;
-
-	if (id == DAVINCI_PLLC_CLKID)
-		goto out;
-
-	pll_out /= (readl(pll_base + sysdiv[id - 1]) &
-		DAVINCI_PLLC_DIV_MASK) + 1;
-
-out:
-	return pll_out;
-}
-#ifdef CONFIG_DISPLAY_CPUINFO
-int print_cpuinfo(void)
-{
-	printf("Cores: ARM %d MHz",
-			clk_get(DAVINCI_ARM_CLKID) / 1000000);
-	printf("\nDDR:   %d MHz\n",
-			/* DDR PHY uses an x2 input clock */
-			clk_get(0x10001) / 1000000);
-	return 0;
-}
-#endif
-#else /* CONFIG_SOC_DA8XX */
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-
-static unsigned pll_div(volatile void *pllbase, unsigned offset)
-{
-	u32	div;
-
-	div = REG(pllbase + offset);
-	return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
-}
-
-static inline unsigned pll_prediv(volatile void *pllbase)
-{
-#ifdef CONFIG_SOC_DM355
-	/* this register read seems to fail on pll0 */
-	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
-		return 8;
-	else
-		return pll_div(pllbase, PLLC_PREDIV);
-#endif
-	return 1;
-}
-
-static inline unsigned pll_postdiv(volatile void *pllbase)
-{
-#ifdef CONFIG_SOC_DM355
-	return pll_div(pllbase, PLLC_POSTDIV);
-#elif defined(CONFIG_SOC_DM6446)
-	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
-		return pll_div(pllbase, PLLC_POSTDIV);
-#endif
-	return 1;
-}
-
-static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
-{
-	volatile void	*pllbase = (volatile void *) pll_addr;
-#ifdef CONFIG_SOC_DM646X
-	unsigned	base = CFG_REFCLK_FREQ / 1000;
-#else
-	unsigned	base = CONFIG_SYS_HZ_CLOCK / 1000;
-#endif
-
-	/* the PLL might be bypassed */
-	if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
-		base /= pll_prediv(pllbase);
-		base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
-		base /= pll_postdiv(pllbase);
-	}
-	return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
-}
-
-int print_cpuinfo(void)
-{
-	/* REVISIT fetch and display CPU ID and revision information
-	 * too ... that will matter as more revisions appear.
-	 */
-	printf("Cores: ARM %d MHz",
-			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
-
-#ifdef DSP_PLLDIV
-	printf(", DSP %d MHz",
-			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
-#endif
-
-	printf("\nDDR:   %d MHz\n",
-			/* DDR PHY uses an x2 input clock */
-			pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
-				/ 2);
-	return 0;
-}
-
-#ifdef DAVINCI_DM6467EVM
-unsigned int davinci_arm_clk_get()
-{
-	return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
-}
-#endif
-#endif /* CONFIG_DISPLAY_CPUINFO */
-#endif /* !CONFIG_SOC_DA8XX */
 
 /*
  * Initializes on-chip ethernet controllers.
diff --git a/arch/arm/cpu/arm926ejs/davinci/speed.c b/arch/arm/cpu/arm926ejs/davinci/speed.c
new file mode 100644
index 0000000..40716f6
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/speed.c
@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2011
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/* offsets from PLL controller base */
+#define PLLC_PLLCTL	0x100
+#define PLLC_PLLM	0x110
+#define PLLC_PREDIV	0x114
+#define PLLC_PLLDIV1	0x118
+#define PLLC_PLLDIV2	0x11c
+#define PLLC_PLLDIV3	0x120
+#define PLLC_POSTDIV	0x128
+#define PLLC_BPDIV	0x12c
+#define PLLC_PLLDIV4	0x160
+#define PLLC_PLLDIV5	0x164
+#define PLLC_PLLDIV6	0x168
+#define PLLC_PLLDIV7	0x16c
+#define PLLC_PLLDIV8	0x170
+#define PLLC_PLLDIV9	0x174
+
+#define BIT(x)		(1 << (x))
+
+/* SOC-specific pll info */
+#ifdef CONFIG_SOC_DM355
+#define ARM_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DM644X
+#define ARM_PLLDIV	PLLC_PLLDIV2
+#define DSP_PLLDIV	PLLC_PLLDIV1
+#define DDR_PLLDIV	PLLC_PLLDIV2
+#endif
+
+#ifdef CONFIG_SOC_DM646X
+#define DSP_PLLDIV	PLLC_PLLDIV1
+#define ARM_PLLDIV	PLLC_PLLDIV2
+#define DDR_PLLDIV	PLLC_PLLDIV1
+#endif
+
+#ifdef CONFIG_SOC_DA8XX
+unsigned int sysdiv[9] = {
+	PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
+	PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
+};
+
+int clk_get(enum davinci_clk_ids id)
+{
+	int pre_div;
+	int pllm;
+	int post_div;
+	int pll_out;
+	unsigned int pll_base;
+
+	pll_out = CONFIG_SYS_OSCIN_FREQ;
+
+	if (id == DAVINCI_AUXCLK_CLKID)
+		goto out;
+
+	if ((id >> 16) == 1)
+		pll_base = (unsigned int)davinci_pllc1_regs;
+	else
+		pll_base = (unsigned int)davinci_pllc0_regs;
+
+	id &= 0xFFFF;
+
+	/*
+	 * Lets keep this simple. Combining operations can result in
+	 * unexpected approximations
+	 */
+	pre_div = (readl(pll_base + PLLC_PREDIV) &
+		DAVINCI_PLLC_DIV_MASK) + 1;
+	pllm = readl(pll_base + PLLC_PLLM) + 1;
+
+	pll_out /= pre_div;
+	pll_out *= pllm;
+
+	if (id == DAVINCI_PLLM_CLKID)
+		goto out;
+
+	post_div = (readl(pll_base + PLLC_POSTDIV) &
+		DAVINCI_PLLC_DIV_MASK) + 1;
+
+	pll_out /= post_div;
+
+	if (id == DAVINCI_PLLC_CLKID)
+		goto out;
+
+	pll_out /= (readl(pll_base + sysdiv[id - 1]) &
+		DAVINCI_PLLC_DIV_MASK) + 1;
+
+out:
+	return pll_out;
+}
+#endif /* CONFIG_SOC_DA8XX */
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+
+static unsigned pll_div(unsigned pllbase, unsigned offset)
+{
+	u32	div;
+
+	div = readl(pllbase + offset);
+	return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
+}
+
+static inline unsigned pll_prediv(unsigned pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+	/* this register read seems to fail on pll0 */
+	if (pllbase == DAVINCI_PLL_CNTRL0_BASE)
+		return 8;
+	else
+		return pll_div(pllbase, PLLC_PREDIV);
+#endif
+	return 1;
+}
+
+static inline unsigned pll_postdiv(unsigned pllbase)
+{
+#ifdef CONFIG_SOC_DM355
+	return pll_div(pllbase, PLLC_POSTDIV);
+#elif defined(CONFIG_SOC_DM6446)
+	if (pllbase == DAVINCI_PLL_CNTRL0_BASE)
+		return pll_div(pllbase, PLLC_POSTDIV);
+#endif
+	return 1;
+}
+
+static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
+{
+#ifdef CONFIG_SOC_DM646X
+	unsigned	base = CFG_REFCLK_FREQ / 1000;
+#else
+	unsigned	base = CONFIG_SYS_HZ_CLOCK / 1000;
+#endif
+
+	/* the PLL might be bypassed */
+	if (readl(pll_addr + PLLC_PLLCTL) & BIT(0)) {
+		base /= pll_prediv(pll_addr);
+		base *= 1 + (readl(pll_addr + PLLC_PLLM) & 0x0ff);
+		base /= pll_postdiv(pll_addr);
+	}
+	return DIV_ROUND_UP(base, 1000 * pll_div(pll_addr, div));
+}
+
+int print_cpuinfo(void)
+{
+	/* REVISIT fetch and display CPU ID and revision information
+	 * too ... that will matter as more revisions appear.
+	 */
+	printf("Cores: ARM %d MHz",
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
+
+#ifdef DSP_PLLDIV
+	printf(", DSP %d MHz",
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
+#endif
+
+	printf("\nDDR:   %d MHz\n",
+			/* DDR PHY uses an x2 input clock */
+			pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
+				/ 2);
+	return 0;
+}
+
+#ifdef DAVINCI_DM6467EVM
+unsigned int davinci_arm_clk_get()
+{
+	return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
+}
+#endif
+#endif
-- 
1.6.2.4



More information about the U-Boot mailing list