[U-Boot] [PATCH v17 8/9] adp-ag101: add board adp-ag101 support

[Wolfgang Denk]

Dear Macpaul Lin,

In message <1319092871-28135-8-git-send-email-macpaul at andestech.com> you wrote:
> Add evaluation board "adp-ag101" configuration file adp-ag101.h.
> Add adp-ag101.c board config and related settings.
> Add board adp-ag101 into boards.cfg
> 
> Signed-off-by: Macpaul Lin <macpaul at andestech.com>
> ---
> Changes for v1-v4:
>   - code clean up
> Changes for v5-v6:
>   - Refine the definitions and parameters about CLK,
>     AHB controller, SDRAM controller, Static memory controllers.
>   - Add APB_CLK, AHB_CLK, SYS_CLK definitions for backward compatible.
>   - ftahbc010:
>     - Update include path of ftahbc010.
>   - ftsdmc021:
>     - Update include path of ftsdmc021.
>   - ftsmc020:
>     - Update include path of ftsmc020.
>   - ftwdt010:
>     - Fix WDT define and update include path.
>     - Fix ftwdt010 for hardware reset.
>   - ftpmu010:
>     - Remove duplicate PMU definitions.
>     - Add related configurations.
>   - Fix MAX malloc len and fix saveenv.
>   - clean up.
> Changes for v7:
>   - clean up.
>   - Move CONFIG_SYS_TEXT_BASE from board/config.mk.
>   - Fix Makefile and remove config.mk
> Changes for v8:
>   - No change.
> Changes for v9:
>   - Fix because other boards has been added into boards.cfg and
>     broken this patch.
> Changes for v10:
>   - adp-ag101.h
>    - Fix lines over 80 characters.
>    - Fix for introducing gen-asm-offset.
>    - Add mmc support for FTSDC010 SD/MMC Controller.
>    - fix flash init.
>    - fix ftsmc010 configuraion for flash probing.
>    - Add SP_INIT related configurations for supporting relocation.
>    - Fix CONFIG_TEXT_BASE for relocation.
>    - Add CONFIG_MEM_REMAP for some hardware boards and non-OS application.
>   - adp-ag101.c
>    - Clean up for braces according to Wolfgang's suggestion.
>    - Add mmc support for FTSDC010 SD/MMC Controller.
>    - fix dram init(), made this more simpler.
> Changes for v11:
>   - No change.
> Changes for v12:
>   - adp-ag101.h
>    - fix address when enable CONFIG_SKIP_LOWLEVEL_INIT
> Changes for v13:
>   - board/AndesTech/adp-ag101/Makefile: remove unused clean and distclean.
> Changes for v14:
>   - No change.
> Changes for v15:
>   - adp-ag101.h: drop NET_MULTI
>   - Makefile: clean up Makefile
> Changes for v16:
>   - No change.
> Changes for v17:
>   - Fix boards.cfg (update only).
> 
>  MAINTAINERS                           |   11 +
>  MAKEALL                               |    6 +
>  board/AndesTech/adp-ag101/Makefile    |   44 ++++
>  board/AndesTech/adp-ag101/adp-ag101.c |   89 +++++++
>  boards.cfg                            |    1 +
>  include/configs/adp-ag101.h           |  406 +++++++++++++++++++++++++++++++++
>  6 files changed, 557 insertions(+), 0 deletions(-)
>  create mode 100644 board/AndesTech/adp-ag101/Makefile
>  create mode 100644 board/AndesTech/adp-ag101/adp-ag101.c
>  create mode 100644 include/configs/adp-ag101.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"'Tis true, 'tis pity, and pity 'tis 'tis true."
    - Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_