[U-Boot] [PATCH 1/2] rtc: Make mc13783-rtc driver generic

[Stefano Babic]

On 10/24/2011 06:37 PM, Fabio Estevam wrote:
> Rename mc13783-rtc so that it can be used for both MC13783 and MC13892 PMICs.
> 
> efikamx board, for example, does use a MC13892 PMIC, but the RTC selection is currently made as:
> 
> #define CONFIG_RTC_MC13783
> 
> ,which is not very obvious.
> 
> Let the MC13783 and MC13892 RTC be selected by:
> 
> #define CONFIG_RTC_MC13XXX
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  README                          |    2 +-
>  drivers/rtc/Makefile            |    2 +-
>  include/configs/efikamx.h       |    2 +-
>  include/configs/imx31_litekit.h |    2 +-
>  include/configs/mx31ads.h       |    2 +-
>  include/configs/mx31pdk.h       |    2 +-
>  include/configs/qong.h          |    2 +-
>  include/configs/vision2.h       |    2 +-
>  8 files changed, 8 insertions(+), 8 deletions(-)

Well, I do not see that drivers/rtc/mc13783-rtc.c becomes
drivers/rtc/mc13xxx-rtc.c. You patch misses something, I suppose.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================