[U-Boot] [PATCH v4 1/2] arm926ejs: add NXP LPC32x0 cpu series support

Vladimir Zapolskiy vz at mleia.com
Tue Oct 25 18:27:43 CEST 2011


This change adds initial support for NXP LPC32x0 SoC series.

Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
---
Changes from v3 to v4:
* extended memory controller definitions are introduced
* added print_cpuinfo() function

Changes from v2 to v3:
* checkpatch.pl reports zero errors and warnings

Changes from v1 to v2:
* BIT(n) and SBF(s, v) macro are not used anymore
* removed NS16550 and 14-clock UART definitions from uart.h
* added devices.c file, which contains standard UART preinitialization routine
* added get_serial_clock() function, it returns actual frequency of UART clock
* __udelay() realization is simplified, no need of interrupt handling

 arch/arm/cpu/arm926ejs/lpc32xx/Makefile       |   45 +++++++
 arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c       |  118 ++++++++++++++++++
 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c          |   58 +++++++++
 arch/arm/cpu/arm926ejs/lpc32xx/devices.c      |   47 +++++++
 arch/arm/cpu/arm926ejs/lpc32xx/timer.c        |   94 +++++++++++++++
 arch/arm/include/asm/arch-lpc32xx/clk.h       |  159 +++++++++++++++++++++++++
 arch/arm/include/asm/arch-lpc32xx/config.h    |   59 +++++++++
 arch/arm/include/asm/arch-lpc32xx/cpu.h       |   64 ++++++++++
 arch/arm/include/asm/arch-lpc32xx/emc.h       |   92 ++++++++++++++
 arch/arm/include/asm/arch-lpc32xx/sys_proto.h |   25 ++++
 arch/arm/include/asm/arch-lpc32xx/timer.h     |   74 ++++++++++++
 arch/arm/include/asm/arch-lpc32xx/uart.h      |   54 +++++++++
 arch/arm/include/asm/arch-lpc32xx/wdt.h       |   51 ++++++++
 13 files changed, 940 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h

diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
new file mode 100644
index 0000000..29b4dc8
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB     = $(obj)lib$(SOC).o
+
+COBJS   = cpu.o clkpwr.o devices.o timer.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all:    $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c b/arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
new file mode 100644
index 0000000..103157a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/io.h>
+
+static struct clk_t *clk = (struct clk_t *)CLK_PM_BASE;
+
+unsigned int get_sys_clk_rate(void)
+{
+	if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
+		return RTC_CLK_FREQUENCY * 397;
+	else
+		return OSC_CLK_FREQUENCY;
+}
+
+unsigned int get_hclk_pll_rate(void)
+{
+	unsigned long long fin, fref, fcco, fout;
+	u32 val, m_div, n_div, p_div;
+
+	/*
+	 * Valid frequency ranges:
+	 *     1 * 10^6 <=  Fin <=  20 * 10^6
+	 *     1 * 10^6 <= Fref <=  27 * 10^6
+	 *   156 * 10^6 <= Fcco <= 320 * 10^6
+	 */
+
+	fref = fin = get_sys_clk_rate();
+	if (fin > 20000000ULL || fin < 1000000ULL)
+		return 0;
+
+	val = readl(&clk->hclkpll_ctrl);
+	m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
+	n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
+	if (val & CLK_HCLK_PLL_DIRECT)
+		p_div = 0;
+	else
+		p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
+	p_div = 1 << p_div;
+
+	if (val & CLK_HCLK_PLL_BYPASS) {
+		do_div(fin, p_div);
+		return fin;
+	}
+
+	do_div(fref, n_div);
+	if (fref > 27000000ULL || fref < 1000000ULL)
+		return 0;
+
+	if (val & CLK_HCLK_PLL_FEEDBACK) {
+		fout = fcco = fref * m_div;
+		do_div(fout, p_div);
+	} else {
+		fout = fref * m_div;
+		fcco = fout * p_div;
+	}
+
+	if (fcco > 320000000ULL || fcco < 156000000ULL)
+		return 0;
+
+	return fout;
+}
+
+unsigned int get_hclk_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
+
+	return 1 << val;
+}
+
+unsigned int get_hclk_clk_rate(void)
+{
+	return get_hclk_pll_rate() / get_hclk_clk_div();
+}
+
+unsigned int get_periph_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
+
+	return (val >> 2) + 1;
+}
+
+unsigned int get_periph_clk_rate(void)
+{
+	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
+		return get_sys_clk_rate();
+
+	return get_hclk_pll_rate() / get_periph_clk_div();
+}
+
+int get_serial_clock(void)
+{
+	return get_periph_clk_rate();
+}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
new file mode 100644
index 0000000..5fa5c80
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/wdt.h>
+#include <asm/io.h>
+
+static struct clk_t   *clk = (struct clk_t *)CLK_PM_BASE;
+static struct wdtim_t *wdt = (struct wdtim_t *)WDT_BASE;
+
+void reset_cpu(ulong addr)
+{
+	u32 val;
+
+	/* Enable watchdog clock */
+	val = readl(&clk->timclk_ctrl);
+	writel(val | CLKPWR_TIMCLK_WATCHDOG, &clk->timclk_ctrl);
+
+	/* Reset pulse length is 13005 PERIPH_CLKs */
+	writel(13000, &wdt->pulse);
+
+	/* Force WDOG_RESET2 and RESOUT_N signal active */
+	writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
+	       &wdt->mctrl);
+
+	while (1)
+		/* NOP */;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	printf("CPU:   NXP LPC32XX\n");
+	printf("CPU clock:        %uMHz\n", get_hclk_pll_rate() / 1000000);
+	printf("AHB bus clock:    %uMHz\n", get_hclk_clk_rate() / 1000000);
+	printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
new file mode 100644
index 0000000..5616e53
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/uart.h>
+#include <asm/io.h>
+
+static struct clk_t       *clk          = (struct clk_t *)CLK_PM_BASE;
+static struct uart_ctrl_t *uart_control = (struct uart_ctrl_t *)UART_CTRL_BASE;
+
+void lpc32xx_uart_init(unsigned int uart_id)
+{
+	u32 val;
+
+	if (uart_id < 3 || uart_id > 6)
+		return;
+
+	/* Enable UART system clock */
+	val = readl(&clk->uartclk_ctrl);
+	writel(val | CLKPWR_UART(uart_id), &clk->uartclk_ctrl);
+
+	/* Place UART in autoclock mode */
+	val = readl(&uart_control->clkmode) & ~UART_CLKMODE_MASK(uart_id);
+	writel(val | UART_CLKMODE_AUTO(uart_id), &uart_control->clkmode);
+
+	/* Bypass pre-divider of UART clock */
+	val = CLKPWR_UART_X_DIV(1) | CLKPWR_UART_Y_DIV(1);
+	writel(val, &clk->u3clk + (uart_id - 3));
+}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
new file mode 100644
index 0000000..725c036
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/timer.h>
+#include <asm/io.h>
+
+static struct timer_t *timer0 = (struct timer_t *)TIMER0_BASE;
+static struct timer_t *timer1 = (struct timer_t *)TIMER1_BASE;
+static struct clk_t   *clk    = (struct clk_t *)CLK_PM_BASE;
+
+static void lpc32xx_timer_clock(u32 bit, int enable)
+{
+	u32 val = readl(&clk->timclk_ctrl1);
+
+	if (enable)
+		val |= bit;
+	else
+		val &= ~bit;
+
+	writel(val, &clk->timclk_ctrl1);
+}
+
+static void lpc32xx_timer_reset(struct timer_t *timer, u32 freq)
+{
+	writel(TIMER_TCR_COUNTER_RESET,   &timer->tcr);
+	writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
+	writel(0, &timer->tc);
+	writel(0, &timer->pr);
+
+	/* Count mode is every rising PCLK edge */
+	writel(TIMER_CTCR_MODE_TIMER, &timer->ctcr);
+
+	/* Set prescale counter value */
+	writel((get_periph_clk_rate() / freq) - 1, &timer->pr);
+}
+
+static void lpc32xx_timer_count(struct timer_t *timer, int enable)
+{
+	if (enable)
+		writel(TIMER_TCR_COUNTER_ENABLE,  &timer->tcr);
+	else
+		writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
+}
+
+int timer_init(void)
+{
+	lpc32xx_timer_clock(CLKPWR_TIMCLK_TIMER0, 1);
+	lpc32xx_timer_reset(timer0, CONFIG_SYS_HZ);
+	lpc32xx_timer_count(timer0, 1);
+
+	return 0;
+}
+
+ulong get_timer(ulong base)
+{
+	return readl(&timer0->tc) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	lpc32xx_timer_clock(CLKPWR_TIMCLK_TIMER1, 1);
+	lpc32xx_timer_reset(timer1, CONFIG_SYS_HZ * 1000);
+	lpc32xx_timer_count(timer1, 1);
+
+	while (readl(&timer1->tc) < usec)
+		/* NOP */;
+
+	lpc32xx_timer_count(timer1, 0);
+	lpc32xx_timer_clock(CLKPWR_TIMCLK_TIMER1, 0);
+}
+
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h b/arch/arm/include/asm/arch-lpc32xx/clk.h
new file mode 100644
index 0000000..786a4ab
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/clk.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LPC32XX_CLK_H
+#define _LPC32XX_CLK_H
+
+#include <asm/types.h>
+
+#define OSC_CLK_FREQUENCY   13000000
+#define RTC_CLK_FREQUENCY   32768
+
+/* Clocking and Power Control Registers */
+struct clk_t {
+	u32 reserved0[5];
+	u32 boot_map;       /* Boot Map Control Register                    */
+	u32 p0_intr_er;     /* Port 0/1 Start and interrupt Enable Register */
+	u32 usbdiv_ctrl;    /* USB Clock Pre-Divide Register                */
+	/* Internal Start Signal Sources Registers      */
+	u32 start_er_int;   /* Start Enable Register                        */
+	u32 start_rsr_int;  /* Start Raw Status Register                    */
+	u32 start_sr_int;   /* Start Status Register                        */
+	u32 start_apr_int;  /* Start Activation Polarity Register           */
+	/* Device Pin Start Signal Sources Registers    */
+	u32 start_er_pin;   /* Start Enable Register                        */
+	u32 start_rsr_pin;  /* Start Raw Status Register                    */
+	u32 start_sr_pin;   /* Start Status Register                        */
+	u32 start_apr_pin;  /* Start Activation Polarity Register           */
+	/* Clock Control Registers                      */
+	u32 hclkdiv_ctrl;   /* HCLK Divider Control Register                */
+	u32 pwr_ctrl;       /* Power Control Register                       */
+	u32 pll397_ctrl;    /* PLL397 Control Register                      */
+	u32 osc_ctrl;       /* Main Oscillator Control Register             */
+	u32 sysclk_ctrl;    /* SYSCLK Control Register                      */
+	u32 lcdclk_ctrl;    /* LCD Clock Control Register                   */
+	u32 hclkpll_ctrl;   /* HCLK PLL Control Register                    */
+	u32 reserved1;
+	u32 adclk_ctrl1;    /* ADC Clock Control1 Register                  */
+	u32 usb_ctrl;       /* USB Control Register                         */
+	u32 sdramclk_ctrl;  /* SDRAM Clock Control Register                 */
+	u32 ddr_lap_nom;    /* DDR Calibration Nominal Value                */
+	u32 ddr_lap_count;  /* DDR Calibration Measured Value               */
+	u32 ddr_cal_delay;  /* DDR Calibration Delay Value                  */
+	u32 ssp_ctrl;       /* SSP Control Register                         */
+	u32 i2s_ctrl;       /* I2S Clock Control Register                   */
+	u32 ms_ctrl;        /* Memory Card Control Register                 */
+	u32 reserved2[3];
+	u32 macclk_ctrl;    /* Ethernet MAC Clock Control Register          */
+	u32 reserved3[4];
+	u32 test_clk;       /* Test Clock Selection Register                */
+	u32 sw_int;         /* Software Interrupt Register                  */
+	u32 i2cclk_ctrl;    /* I2C Clock Control Register                   */
+	u32 keyclk_ctrl;    /* Keyboard Scan Clock Control Register         */
+	u32 adclk_ctrl;     /* ADC Clock Control Register                   */
+	u32 pwmclk_ctrl;    /* PWM Clock Control Register                   */
+	u32 timclk_ctrl;    /* Timer Clock Control Register                 */
+	u32 timclk_ctrl1;   /* Timer Clock Control1 and MCPWM Register      */
+	u32 spi_ctrl;       /* SPI Control Register                         */
+	u32 flashclk_ctrl;  /* NAND Flash Clock Control Register            */
+	u32 reserved4;
+	u32 u3clk;          /* UART 3 Clock Control Register                */
+	u32 u4clk;          /* UART 4 Clock Control Register                */
+	u32 u5clk;          /* UART 5 Clock Control Register                */
+	u32 u6clk;          /* UART 6 Clock Control Register                */
+	u32 irdaclk;        /* IrDA Clock Control Register                  */
+	u32 uartclk_ctrl;   /* UART Clock Control Register                  */
+	u32 dmaclk_ctrl;    /* DMA Clock Control Register                   */
+	u32 autoclk_ctrl;   /* Autoclock Control Register                   */
+};
+
+/* HCLK Divider Control Register bits */
+#define CLK_HCLK_DDRAM_HALF             (0x2 << 7)
+#define CLK_HCLK_DDRAM_NOMINAL          (0x1 << 7)
+#define CLK_HCLK_DDRAM_STOPPED          (0x0 << 7)
+#define CLK_HCLK_PERIPH_DIV_MASK        (0x1F << 2)
+#define CLK_HCLK_PERIPH_DIV(n)          (((n - 1) & 0x1F) << 2)
+#define CLK_HCLK_ARM_PLL_DIV_MASK       (0x3 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_4          (0x2 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_2          (0x1 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_1          (0x0 << 0)
+
+/* Power Control Register bits */
+#define CLK_PWR_HCLK_RUN_PERIPH         (1 << 10)
+#define CLK_PWR_EMC_SREFREQ             (1 << 9)
+#define CLK_PWR_EMC_SREFREQ_UPDATE      (1 << 8)
+#define CLK_PWR_SDRAM_SREFREQ           (1 << 7)
+#define CLK_PWR_HIGHCORE_LEVEL          (1 << 5)
+#define CLK_PWR_SYSCLKEN_LEVEL          (1 << 4)
+#define CLK_PWR_SYSCLKEN_CTRL           (1 << 3)
+#define CLK_PWR_NORMAL_RUN              (1 << 2)
+#define CLK_PWR_HIGHCORE_CTRL           (1 << 1)
+#define CLK_PWR_STOP_MODE               (1 << 0)
+
+/* SYSCLK Control Register bits */
+#define CLK_SYSCLK_PLL397               (1 << 1)
+#define CLK_SYSCLK_MUX                  (1 << 0)
+
+/* HCLK PLL Control Register bits */
+#define CLK_HCLK_PLL_OPERATING          (1 << 16)
+#define CLK_HCLK_PLL_BYPASS             (1 << 15)
+#define CLK_HCLK_PLL_DIRECT             (1 << 14)
+#define CLK_HCLK_PLL_FEEDBACK           (1 << 13)
+#define CLK_HCLK_PLL_POSTDIV_MASK       (0x3 << 11)
+#define CLK_HCLK_PLL_POSTDIV_16         (0x3 << 11)
+#define CLK_HCLK_PLL_POSTDIV_8          (0x2 << 11)
+#define CLK_HCLK_PLL_POSTDIV_4          (0x1 << 11)
+#define CLK_HCLK_PLL_POSTDIV_2          (0x0 << 11)
+#define CLK_HCLK_PLL_PREDIV_MASK        (0x3 << 9)
+#define CLK_HCLK_PLL_PREDIV_4           (0x3 << 9)
+#define CLK_HCLK_PLL_PREDIV_3           (0x2 << 9)
+#define CLK_HCLK_PLL_PREDIV_2           (0x1 << 9)
+#define CLK_HCLK_PLL_PREDIV_1           (0x0 << 9)
+#define CLK_HCLK_PLL_FEEDBACK_DIV_MASK  (0xFF << 1)
+#define CLK_HCLK_PLL_FEEDBACK_DIV(n)    (((n - 1) & 0xFF) << 1)
+#define CLK_HCLK_PLL_LOCKED             (1 << 0)
+
+/* Timer Clock Control1 Register bits */
+#define CLKPWR_TIMCLK_MOTOR             (1 << 5)
+#define CLKPWR_TIMCLK_TIMER3            (1 << 5)
+#define CLKPWR_TIMCLK_TIMER2            (1 << 4)
+#define CLKPWR_TIMCLK_TIMER1            (1 << 3)
+#define CLKPWR_TIMCLK_TIMER0            (1 << 2)
+#define CLKPWR_TIMCLK_TIMER5            (1 << 1)
+#define CLKPWR_TIMCLK_TIMER4            (1 << 0)
+
+/* Timer Clock Control Register bits */
+#define CLKPWR_TIMCLK_HSTIMER           (1 << 1)
+#define CLKPWR_TIMCLK_WATCHDOG          (1 << 0)
+
+/* UART Clock Control Register bits */
+#define CLKPWR_UART(n)                  (1 << ((n) - 3))
+
+/* UARTn Clock Select Registers bits */
+#define CLKPWR_UART_HCLK                (1 << 16)
+#define CLKPWR_UART_X_DIV(n)            (((n) & 0xFF) << 8)
+#define CLKPWR_UART_Y_DIV(n)            (((n) & 0xFF) << 0)
+
+unsigned int get_sys_clk_rate(void);
+unsigned int get_hclk_pll_rate(void);
+unsigned int get_hclk_clk_div(void);
+unsigned int get_hclk_clk_rate(void);
+unsigned int get_periph_clk_div(void);
+unsigned int get_periph_clk_rate(void);
+
+#endif /* _LPC32XX_CLK_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
new file mode 100644
index 0000000..a2d33a1
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -0,0 +1,59 @@
+/*
+ * Common definitions for LPC32XX board configurations
+ *
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_CONFIG_H
+#define _LPC32XX_CONFIG_H
+
+/* Basic CPU architecture */
+#define CONFIG_ARM926EJS                1
+
+#define CONFIG_NR_DRAM_BANKS_MAX        2
+
+/* 1KHz clock tick */
+#define CONFIG_SYS_HZ                   1000
+
+/* UART configuration */
+#if CONFIG_SYS_LPC32XX_UART >= 3 && CONFIG_SYS_LPC32XX_UART <= 6
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_CONS_INDEX               (CONFIG_SYS_LPC32XX_UART - 2)
+#endif
+
+#if defined(CONFIG_SYS_NS16550_SERIAL)
+#define CONFIG_SYS_NS16550
+
+#define CONFIG_SYS_NS16550_REG_SIZE     -4
+#define CONFIG_SYS_NS16550_CLK          get_serial_clock()
+
+#define CONFIG_SYS_NS16550_COM1         UART3_BASE
+#define CONFIG_SYS_NS16550_COM2         UART4_BASE
+#define CONFIG_SYS_NS16550_COM3         UART5_BASE
+#define CONFIG_SYS_NS16550_COM4         UART6_BASE
+
+#define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
+#endif
+
+/* NOR Flash */
+#if defined(CONFIG_SYS_FLASH_CFI)
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_PROTECTION
+#endif
+
+#endif /* _LPC32XX_CONFIG_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/cpu.h b/arch/arm/include/asm/arch-lpc32xx/cpu.h
new file mode 100644
index 0000000..53e6084
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/cpu.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _LPC32XX_CPU_H
+#define _LPC32XX_CPU_H
+
+/* LPC32XX Memory map */
+
+/* AHB physical base addresses */
+#define SLC_NAND_BASE   0x20020000      /* SLC NAND Flash registers base    */
+#define SSP0_BASE       0x20084000      /* SSP0 registers base              */
+#define SD_CARD_BASE    0x20098000      /* SD card interface registers base */
+#define MLC_NAND_BASE   0x200A8000      /* MLC NAND Flash registers base    */
+#define DMA_BASE        0x31000000      /* DMA controller registers base    */
+#define USB_BASE        0x31020000      /* USB registers base               */
+#define LCD_BASE        0x31040000      /* LCD registers base               */
+#define ETHERNET_BASE   0x31060000      /* Ethernet registers base          */
+#define EMC_BASE        0x31080000      /* EMC configuration registers base */
+
+/* FAB peripherals base addresses */
+#define CLK_PM_BASE     0x40004000      /* System control registers base    */
+#define HS_UART1_BASE   0x40014000      /* High speed UART 1 registers base */
+#define HS_UART2_BASE   0x40018000      /* High speed UART 2 registers base */
+#define HS_UART7_BASE   0x4001C000      /* High speed UART 7 registers base */
+#define RTC_BASE        0x40024000      /* RTC registers base               */
+#define GPIO_BASE       0x40028000      /* GPIO registers base              */
+#define WDT_BASE        0x4003C000      /* Watchdog timer registers base    */
+#define TIMER0_BASE     0x40044000      /* Timer0 registers base            */
+#define TIMER1_BASE     0x4004C000      /* Timer1 registers base            */
+#define UART_CTRL_BASE  0x40054000      /* UART control regsisters base     */
+
+/* APB peripherals base addresses */
+#define UART3_BASE      0x40080000      /* UART 3 registers base            */
+#define UART4_BASE      0x40088000      /* UART 4 registers base            */
+#define UART5_BASE      0x40090000      /* UART 5 registers base            */
+#define UART6_BASE      0x40098000      /* UART 6 registers base            */
+
+/* External SDRAM Memory Bank base addresses */
+#define EMC_DYCS0_BASE  0x80000000      /* SDRAM DYCS0 base address         */
+#define EMC_DYCS1_BASE  0xA0000000      /* SDRAM DYCS1 base address         */
+
+/* External Static Memory Bank base addresses */
+#define EMC_CS0_BASE    0xE0000000
+#define EMC_CS1_BASE    0xE1000000
+#define EMC_CS2_BASE    0xE2000000
+#define EMC_CS3_BASE    0xE3000000
+
+#endif /* _LPC32XX_CPU_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/emc.h b/arch/arm/include/asm/arch-lpc32xx/emc.h
new file mode 100644
index 0000000..457dceb
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/emc.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _LPC32XX_EMC_H
+#define _LPC32XX_EMC_H
+
+#include <asm/types.h>
+
+/* EMC Registers */
+struct emc_t {
+	u32 ctrl;               /* Controls operation of the EMC             */
+	u32 status;             /* Provides EMC status information           */
+	u32 config;             /* Configures operation of the EMC           */
+	u32 reserved0[5];
+	u32 control;            /* Controls dyn memory operation             */
+	u32 refresh;            /* Configures dyn memory refresh operation   */
+	u32 read_config;        /* Configures the dyn memory read strategy   */
+	u32 reserved1;
+	u32 t_rp;               /* Precharge command period                  */
+	u32 t_ras;              /* Active to precharge command period        */
+	u32 t_srex;             /* Self-refresh exit time                    */
+	u32 reserved2[2];
+	u32 t_wr;               /* Write recovery time                       */
+	u32 t_rc;               /* Active to active command period           */
+	u32 t_rfc;              /* Auto-refresh period                       */
+	u32 t_xsr;              /* Exit self-refresh to active command time  */
+	u32 t_rrd;              /* Active bank A to active bank B latency    */
+	u32 t_mrd;              /* Load mode register to active command time */
+	u32 t_cdlr;             /* Last data in to read command time         */
+	u32 reserved3[8];
+	u32 extended_wait;      /* time for static memory rd/wr transfers    */
+	u32 reserved4[31];
+	u32 config0;            /* Configuration information for the SDRAM   */
+	u32 rascas0;            /* RAS and CAS latencies for the SDRAM       */
+	u32 reserved5[6];
+	u32 config1;            /* Configuration information for the SDRAM   */
+	u32 rascas1;            /* RAS and CAS latencies for the SDRAM       */
+	u32 reserved6[54];
+	struct emc_stat_t {
+		u32 config;     /* Static memory configuration               */
+		u32 waitwen;    /* Delay from chip select to write enable    */
+		u32 waitoen;    /* Delay to output enable                    */
+		u32 waitrd;     /* Delay to a read access                    */
+		u32 waitpage;   /* Delay for async page mode read            */
+		u32 waitwr;     /* Delay to a write access                   */
+		u32 waitturn;   /* Number of bus turnaround cycles           */
+		u32 reserved;
+	} stat[4];
+	u32 reserved7[96];
+	struct emc_ahb_t {
+		u32 control;    /* Control register for AHB                  */
+		u32 status;     /* Status register for AHB                   */
+		u32 timeout;    /* Timeout register for AHB                  */
+		u32 reserved[5];
+	} ahb[5];
+};
+
+/* Static Memory Configuration Register bits */
+#define EMC_STAT_CONFIG_WP              (1 << 20)
+#define EMC_STAT_CONFIG_EW              (1 << 8)
+#define EMC_STAT_CONFIG_PB              (1 << 7)
+#define EMC_STAT_CONFIG_PC              (1 << 6)
+#define EMC_STAT_CONFIG_PM              (1 << 3)
+#define EMC_STAT_CONFIG_32BIT           (2 << 0)
+#define EMC_STAT_CONFIG_16BIT           (1 << 0)
+#define EMC_STAT_CONFIG_8BIT            (0 << 0)
+
+/* Static Memory Delay Registers */
+#define EMC_STAT_WAITWEN(n)             ((n - 1) & 0x0F)
+#define EMC_STAT_WAITOEN(n)             ((n - 1) & 0x0F)
+#define EMC_STAT_WAITRD(n)              ((n - 1) & 0x1F)
+#define EMC_STAT_WAITPAGE(n)            ((n - 1) & 0x1F)
+#define EMC_STAT_WAITWR(n)              ((n - 2) & 0x1F)
+#define EMC_STAT_WAITTURN(n)            ((n - 1) & 0x0F)
+
+#endif /* _LPC32XX_EMC_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
new file mode 100644
index 0000000..882da58
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+void lpc32xx_uart_init(unsigned int uart_id);
+
+#endif
diff --git a/arch/arm/include/asm/arch-lpc32xx/timer.h b/arch/arm/include/asm/arch-lpc32xx/timer.h
new file mode 100644
index 0000000..c11401b
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/timer.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _LPC32XX_TIMER_H
+#define _LPC32XX_TIMER_H
+
+#include <asm/types.h>
+
+/* Timer/Counter Registers */
+struct timer_t {
+	u32 ir;             /* Interrupt Register               */
+	u32 tcr;            /* Timer Control Register           */
+	u32 tc;             /* Timer Counter                    */
+	u32 pr;             /* Prescale Register                */
+	u32 pc;             /* Prescale Counter                 */
+	u32 mcr;            /* Match Control Register           */
+	u32 mr[4];          /* Match Registers                  */
+	u32 ccr;            /* Capture Control Register         */
+	u32 cr[4];          /* Capture Registers                */
+	u32 emr;            /* External Match Register          */
+	u32 reserved[12];
+	u32 ctcr;           /* Count Control Register           */
+};
+
+/* Timer/Counter Interrupt Register bits */
+#define TIMER_IR_CR(n)                  (1 << ((n) + 4))
+#define TIMER_IR_MR(n)                  (1 << (n))
+
+/* Timer/Counter Timer Control Register bits */
+#define TIMER_TCR_COUNTER_RESET         (1 << 1)
+#define TIMER_TCR_COUNTER_ENABLE        (1 << 0)
+#define TIMER_TCR_COUNTER_DISABLE       0x00
+
+/* Timer/Counter Match Control Register bits */
+#define TIMER_MCR_STOP(n)               (1 << (3 * (n) + 2))
+#define TIMER_MCR_RESET(n)              (1 << (3 * (n) + 1))
+#define TIMER_MCR_INTERRUPT(n)          (1 << (3 * (n)))
+
+/* Timer/Counter Capture Control Register bits */
+#define TIMER_CCR_INTERRUPT(n)          (1 << (3 * (n) + 2))
+#define TIMER_CCR_FALLING_EDGE(n)       (1 << (3 * (n) + 1))
+#define TIMER_CCR_RISING_EDGE(n)        (1 << (3 * (n)))
+
+/* Timer/Counter External Match Register bits */
+#define TIMER_EMR_EMC_TOGGLE(n)         (0x3 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_SET(n)            (0x2 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_CLEAR(n)          (0x1 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_NOTHING(n)        (0x0 << (2 * (n) + 4))
+#define TIMER_EMR_EM(n)                 (1 << (n))
+
+/* Timer/Counter Count Control Register bits */
+#define TIMER_CTCR_INPUT(n)             ((n) << 2)
+#define TIMER_CTCR_MODE_COUNTER_BOTH    (0x3 << 0)
+#define TIMER_CTCR_MODE_COUNTER_FALLING (0x2 << 0)
+#define TIMER_CTCR_MODE_COUNTER_RISING  (0x1 << 0)
+#define TIMER_CTCR_MODE_TIMER           (0x0 << 0)
+
+#endif /* _LPC32XX_TIMER_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/uart.h b/arch/arm/include/asm/arch-lpc32xx/uart.h
new file mode 100644
index 0000000..f20c66a
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/uart.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _LPC32XX_UART_H
+#define _LPC32XX_UART_H
+
+#include <asm/types.h>
+
+/* UART Control Registers */
+struct uart_ctrl_t {
+	u32 ctrl;           /* Control Register                 */
+	u32 clkmode;        /* Clock Mode Register              */
+	u32 loop;           /* Loopback Control Register        */
+};
+
+/* UART Control Register bits */
+#define UART_CTRL_UART3_MD_CTRL         (1 << 11)
+#define UART_CTRL_HDPX_INV              (1 << 10)
+#define UART_CTRL_HDPX_EN               (1 << 9)
+#define UART_CTRL_UART6_IRDA            (1 << 5)
+#define UART_CTRL_IR_TX6_INV            (1 << 4)
+#define UART_CTRL_IR_RX6_INV            (1 << 3)
+#define UART_CTRL_IR_RX_LENGTH          (1 << 2)
+#define UART_CTRL_IR_TX_LENGTH          (1 << 1)
+#define UART_CTRL_UART5_USB_MODE        (1 << 0)
+
+/* UART Clock Mode Register bits */
+#define UART_CLKMODE_STATX(n)           (1 << ((n) + 16))
+#define UART_CLKMODE_STAT               (1 << 14)
+#define UART_CLKMODE_MASK(n)            (0x3 << (2 * (n) - 2))
+#define UART_CLKMODE_AUTO(n)            (0x2 << (2 * (n) - 2))
+#define UART_CLKMODE_ON(n)              (0x1 << (2 * (n) - 2))
+#define UART_CLKMODE_OFF(n)             (0x0 << (2 * (n) - 2))
+
+/* UART Loopback Control Register bits */
+#define UART_LOOPBACK(n)                (1 << ((n) - 1))
+
+#endif /* _LPC32XX_UART_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/wdt.h b/arch/arm/include/asm/arch-lpc32xx/wdt.h
new file mode 100644
index 0000000..e869135
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/wdt.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _LPC32XX_WDT_H
+#define _LPC32XX_WDT_H
+
+#include <asm/types.h>
+
+/* Watchdog Timer Registers */
+struct wdtim_t {
+	u32 isr;            /* Interrupt Status Register        */
+	u32 ctrl;           /* Control Register                 */
+	u32 counter;        /* Counter Value Register           */
+	u32 mctrl;          /* Match Control Register           */
+	u32 match0;         /* Match 0 Register                 */
+	u32 emr;            /* External Match Control Register  */
+	u32 pulse;          /* Reset Pulse Length Register      */
+	u32 res;            /* Reset Source Register            */
+};
+
+/* Watchdog Timer Control Register bits */
+#define WDTIM_CTRL_PAUSE_EN             (1 << 2)
+#define WDTIM_CTRL_RESET_COUNT          (1 << 1)
+#define WDTIM_CTRL_COUNT_ENAB           (1 << 0)
+
+/* Watchdog Timer Match Control Register bits */
+#define WDTIM_MCTRL_RESFRC2             (1 << 6)
+#define WDTIM_MCTRL_RESFRC1             (1 << 5)
+#define WDTIM_MCTRL_M_RES2              (1 << 4)
+#define WDTIM_MCTRL_M_RES1              (1 << 3)
+#define WDTIM_MCTRL_STOP_COUNT0         (1 << 2)
+#define WDTIM_MCTRL_RESET_COUNT0        (1 << 1)
+#define WDTIM_MCTRL_MR0_INT             (1 << 0)
+
+#endif /* _LPC32XX_WDT_H */
-- 
1.7.5.4



More information about the U-Boot mailing list