[U-Boot] MMC0: DMA transfer failed

[Stefano Babic]

On 02/04/2012 16:01, Fabio Estevam wrote:
> Hi,
> 
> On a mx28evk board I am getting the following using top of tree U-boot:
> 
> U-Boot 2012.04-rc1-00001-g037cbfd (Apr 02 2012 - 10:57:48)
> 
> Freescale i.MX28 family at 454 MHz
> DRAM:  128 MiB
> MMC:   MXS MMC: 0
> MMC0: DMA transfer failed
> MMC0: DMA transfer failed
> MMC0: DMA transfer failed
> MMC0: DMA transfer failed
> MMC init failed
> Using default environment
> 
> Is there any patch I am missing?

Hi Fabio,

maybe it is worth to check first if it depends on the data cache, that
is now turned on. Add CONFIG_CMD_CACHE to the configuartion file, and
try to start mmc with and without dcache.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================