[U-Boot] [PATCH 2/8] i.MX: Add target flashable to offset 0

[Stefano Babic]

On 12/04/2012 11:33, Timo Ketola wrote:
> .imx image directly from mkimage must be flashed at offset 0x400 into the nand. Thats a little hard with e.g. openocd.
> 
> Signed-off-by: Timo Ketola <timo at exertus.fi>
> ---

Hi Timo,

>  Makefile |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 1446131..b3f1279 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -410,6 +410,9 @@ $(obj)u-boot.imx:       $(obj)u-boot.bin
>  		$(obj)tools/mkimage -n  $(CONFIG_IMX_CONFIG) -T imximage \
>  		-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
>  
> +$(obj)u-boot-nand.imx: $(obj)u-boot.imx
> +		dd if=$< of=$@ seek=2
> +

I wonder why we need this in u-boot code and to set this rule in the
main Makefile. You can always do this after generating u-boot.

The rules here are to generate the u-boot.imx. Then the same image can
be stored at different addresses. Depending on the i.MX SOC, ofssets can
be different (MX5 / MX6 have different offsets for NOR / NAND / oneNAND).

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================