[U-Boot] Please pull u-boot-mpc85xx

Wolfgang Denk wd at denx.de
Mon Apr 30 16:51:01 CEST 2012


Dear Andy Fleming,

In message <1335330687-19925-1-git-send-email-afleming at freescale.com> you wrote:
> 
> The following changes since commit 61ddce07f8b96c5df7d00466b4da9edaecb0eff1:
> 
>   sandbox: Use the new run_command() (2012-04-23 22:53:54 +0200)
> 
> are available in the git repository at:
>   git://www.denx.de/git/u-boot-mpc85xx.git master
> 
> Chunhe Lan (1):
>       powerpc/p1023rds: Disable nor flash node and enable nand flash node
> 
> Jerry Huang (1):
>       PowerPC: correct the SATA for p1/p2 rdb-pc platform
> 
> Liu Gang (8):
>       powerpc/srio: Rewrite the struct ccsr_rio
>       powerpc/corenet_ds: Correct the compilation errors about ENV
>       powerpc/corenet_ds: Document for the boot from SRIO
>       powerpc/corenet_ds: Master module for boot from SRIO
>       powerpc/corenet_ds: Slave module for boot from SRIO
>       powerpc/corenet_ds: Slave uploads ucode when boot from SRIO
>       powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO
>       powerpc/corenet_ds: Slave core in holdoff when boot from SRIO
> 
> Prabhakar Kushwaha (4):
>       powerpc/85xx:Avoid hardcoded vector address for IVORs
>       powerpc/85xx:Fix IVORs addr after vector table relocation
>       powerpc/85xx:Avoid vector table compilation for nand_spl
>       powerpc/85xx:Fix lds for nand boot debug info
> 
> Shaohui Xie (2):
>       powerpc/p2041rdb: add NAND and NAND boot support
>       powerpc/p2041rdb: add env in NAND support
> 
> Timur Tabi (3):
>       cmd_bdinfo: display the address map size (32-bit vs. 36-bit)
>       powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot
>       powerpc/85xx: don't touch MAS7 on e500v1 when relocating CCSR
> 
> York Sun (1):
>       powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards
> 
>  README                                      |   24 ++
>  arch/powerpc/cpu/mpc85xx/cpu_init.c         |    9 +-
>  arch/powerpc/cpu/mpc85xx/start.S            |  112 ++++++---
>  arch/powerpc/cpu/mpc85xx/u-boot-nand.lds    |    4 +-
>  arch/powerpc/cpu/mpc8xxx/srio.c             |  210 +++++++++++++++
>  arch/powerpc/include/asm/config_mpc85xx.h   |   46 ++++
>  arch/powerpc/include/asm/fsl_srio.h         |   64 +++++
>  arch/powerpc/include/asm/immap_85xx.h       |  387 ++++++++++++++++-----------
>  board/freescale/common/p_corenet/law.c      |   13 +
>  board/freescale/common/p_corenet/tlb.c      |   19 ++
>  board/freescale/corenet_ds/corenet_ds.c     |    4 -
>  board/freescale/mpc8536ds/mpc8536ds.c       |    7 +-
>  board/freescale/mpc8572ds/mpc8572ds.c       |    6 +-
>  board/freescale/mpc8641hpcn/mpc8641hpcn.c   |    3 -
>  board/freescale/p1010rdb/ddr.c              |    6 +-
>  board/freescale/p1010rdb/p1010rdb.c         |    6 +-
>  board/freescale/p1022ds/p1022ds.c           |    8 +-
>  board/freescale/p1023rds/p1023rds.c         |    6 +
>  board/freescale/p1_p2_rdb/p1_p2_rdb.c       |    4 +-
>  board/freescale/p1_p2_rdb_pc/ddr.c          |    4 +-
>  board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c |    8 +-
>  board/freescale/p2020ds/p2020ds.c           |    8 +-
>  board/freescale/p2041rdb/p2041rdb.c         |    4 -
>  board/freescale/p3060qds/p3060qds.c         |    3 -
>  boards.cfg                                  |    7 +
>  common/Makefile                             |    1 +
>  common/cmd_bdinfo.c                         |    8 +
>  common/cmd_nvedit.c                         |    3 +-
>  common/env_remote.c                         |   79 ++++++
>  doc/README.srio-boot-corenet                |  103 +++++++
>  drivers/net/fm/fm.c                         |    2 +
>  include/configs/P1010RDB.h                  |    2 +-
>  include/configs/P2041RDB.h                  |   59 ++++-
>  include/configs/corenet_ds.h                |   75 +++++
>  include/configs/p1_p2_rdb_pc.h              |    4 +-
>  35 files changed, 1047 insertions(+), 261 deletions(-)
>  create mode 100644 arch/powerpc/include/asm/fsl_srio.h
>  create mode 100644 common/env_remote.c
>  create mode 100644 doc/README.srio-boot-corenet

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Premature optimization is the root of all evil.         -- D.E. Knuth


More information about the U-Boot mailing list