[U-Boot] [GIT PULL] Pull request: u-boot-imx

Stefano Babic sbabic at denx.de
Wed Jan 4 17:57:24 CET 2012


Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit a747cc0a8c55d69a56a6db80a35cdb48c853447d:

  tegra2: Optimize out-of-tree build for Ventana. (2011-12-24 10:23:32
+0100)

are available in the git repository at:
  git://www.denx.de/git/u-boot-imx.git master

Eric Nelson (1):
      i.mx6q: mx6qarm2: Enable the usboh3 clock

Fabio Estevam (6):
      net: imx: Add multi-FEC support for imx_get_mac_from_fuse
      mx28: Let imx_get_mac_from_fuse be common for mx28
      mx28: Let dram_init be common for mx28
      mx28evk: Add initial support for MX28EVK board
      mx28evk: Remove 'all' target from Makefile
      m28evk: Use GENERATED_GBL_DATA_SIZE

Jason Liu (4):
      i.mx: i.mx6q: Add the enet clock function
      fec: add the i.mx6q enet driver support
      i.mx6q: arm2: Add the enet function support
      i.mx6:imx6q: allign MAC address with burned-in ordering

Marek Vasut (1):
      MX28: Fix MXSBOOT segfault if no params specified

Veli-Pekka Peltola (1):
      mx28: remove omap specific config options

 MAINTAINERS                                |    1 +
 arch/arm/cpu/arm1136/mx35/generic.c        |    2 +-
 arch/arm/cpu/arm926ejs/mx25/generic.c      |    2 +-
 arch/arm/cpu/arm926ejs/mx27/generic.c      |    2 +-
 arch/arm/cpu/arm926ejs/mx28/mx28.c         |   67 +++++++++++
 arch/arm/cpu/arm926ejs/mx28/start.S        |    6 -
 arch/arm/cpu/armv7/mx6/clock.c             |    5 +
 arch/arm/cpu/armv7/mx6/soc.c               |   16 ++-
 arch/arm/include/asm/arch-mx28/sys_proto.h |    2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h   |    4 +-
 board/denx/m28evk/m28evk.c                 |   53 +--------
 board/freescale/mx28evk/Makefile           |   47 ++++++++
 board/freescale/mx28evk/iomux.c            |  138 ++++++++++++++++++++++
 board/freescale/mx28evk/mx28evk.c          |  169
++++++++++++++++++++++++++
 board/freescale/mx28evk/u-boot.bd          |   14 +++
 board/freescale/mx6qarm2/imximage.cfg      |    2 +-
 board/freescale/mx6qarm2/mx6qarm2.c        |   90 ++++++++++++++
 boards.cfg                                 |    1 +
 drivers/net/fec_mxc.c                      |   19 +++-
 drivers/net/fec_mxc.h                      |    9 +-
 include/configs/m28evk.h                   |    9 ++-
 include/configs/mx28evk.h                  |  176
++++++++++++++++++++++++++++
 include/configs/mx6qarm2.h                 |   12 ++-
 tools/mxsboot.c                            |    3 +
 24 files changed, 769 insertions(+), 80 deletions(-)
 create mode 100644 board/freescale/mx28evk/Makefile
 create mode 100644 board/freescale/mx28evk/iomux.c
 create mode 100644 board/freescale/mx28evk/mx28evk.c
 create mode 100644 board/freescale/mx28evk/u-boot.bd
 create mode 100644 include/configs/mx28evk.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================


More information about the U-Boot mailing list