[U-Boot] [PATCH 1/3 v7] arm926ejs: add NXP LPC32x0 cpu series support

Vladimir Zapolskiy vz at mleia.com
Thu Jan 12 00:12:48 CET 2012


This change adds initial support for NXP LPC32x0 SoC series.

Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
Cc: Wolfgang Denk <wd at denx.de>
---
Changes from v6 to v7:
* get use of setbits_le32() and friends
* add arch_cpu_init() routine

Changes from v5 to v6:
* replaced some spaces with tabs in macro declarations
* more rules separating 14-clock and ns16650 UARTs in config.h

Changes from v4 to v5:
* corrected address in GPLv2+ licence header in files

Changes from v3 to v4:
* extended memory controller definitions are introduced
* added print_cpuinfo() function

Changes from v2 to v3:
* checkpatch.pl reports zero errors and warnings

Changes from v1 to v2:
* BIT(n) and SBF(s, v) macro are not used anymore
* removed NS16550 and 14-clock UART definitions from uart.h
* added devices.c file, which contains standard UART preinitialization routine
* added get_serial_clock() function, it returns actual frequency of UART clock
* __udelay() realization is simplified, no need of interrupt handling

 arch/arm/cpu/arm926ejs/lpc32xx/Makefile       |   45 +++++++
 arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c       |  118 +++++++++++++++++
 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c          |   68 ++++++++++
 arch/arm/cpu/arm926ejs/lpc32xx/devices.c      |   52 ++++++++
 arch/arm/cpu/arm926ejs/lpc32xx/timer.c        |   90 +++++++++++++
 arch/arm/include/asm/arch-lpc32xx/clk.h       |  170 +++++++++++++++++++++++++
 arch/arm/include/asm/arch-lpc32xx/config.h    |   76 +++++++++++
 arch/arm/include/asm/arch-lpc32xx/cpu.h       |   64 +++++++++
 arch/arm/include/asm/arch-lpc32xx/emc.h       |   92 +++++++++++++
 arch/arm/include/asm/arch-lpc32xx/sys_proto.h |   25 ++++
 arch/arm/include/asm/arch-lpc32xx/timer.h     |   74 +++++++++++
 arch/arm/include/asm/arch-lpc32xx/uart.h      |   54 ++++++++
 arch/arm/include/asm/arch-lpc32xx/wdt.h       |   51 ++++++++
 13 files changed, 979 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c
 create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h

diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
new file mode 100644
index 0000000..e6222e4
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA  02110-1301, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB     = $(obj)lib$(SOC).o
+
+COBJS   = cpu.o clkpwr.o devices.o timer.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS    := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all:    $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c b/arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
new file mode 100644
index 0000000..103157a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/io.h>
+
+static struct clk_t *clk = (struct clk_t *)CLK_PM_BASE;
+
+unsigned int get_sys_clk_rate(void)
+{
+	if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
+		return RTC_CLK_FREQUENCY * 397;
+	else
+		return OSC_CLK_FREQUENCY;
+}
+
+unsigned int get_hclk_pll_rate(void)
+{
+	unsigned long long fin, fref, fcco, fout;
+	u32 val, m_div, n_div, p_div;
+
+	/*
+	 * Valid frequency ranges:
+	 *     1 * 10^6 <=  Fin <=  20 * 10^6
+	 *     1 * 10^6 <= Fref <=  27 * 10^6
+	 *   156 * 10^6 <= Fcco <= 320 * 10^6
+	 */
+
+	fref = fin = get_sys_clk_rate();
+	if (fin > 20000000ULL || fin < 1000000ULL)
+		return 0;
+
+	val = readl(&clk->hclkpll_ctrl);
+	m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
+	n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
+	if (val & CLK_HCLK_PLL_DIRECT)
+		p_div = 0;
+	else
+		p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
+	p_div = 1 << p_div;
+
+	if (val & CLK_HCLK_PLL_BYPASS) {
+		do_div(fin, p_div);
+		return fin;
+	}
+
+	do_div(fref, n_div);
+	if (fref > 27000000ULL || fref < 1000000ULL)
+		return 0;
+
+	if (val & CLK_HCLK_PLL_FEEDBACK) {
+		fout = fcco = fref * m_div;
+		do_div(fout, p_div);
+	} else {
+		fout = fref * m_div;
+		fcco = fout * p_div;
+	}
+
+	if (fcco > 320000000ULL || fcco < 156000000ULL)
+		return 0;
+
+	return fout;
+}
+
+unsigned int get_hclk_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
+
+	return 1 << val;
+}
+
+unsigned int get_hclk_clk_rate(void)
+{
+	return get_hclk_pll_rate() / get_hclk_clk_div();
+}
+
+unsigned int get_periph_clk_div(void)
+{
+	u32 val;
+
+	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
+
+	return (val >> 2) + 1;
+}
+
+unsigned int get_periph_clk_rate(void)
+{
+	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
+		return get_sys_clk_rate();
+
+	return get_hclk_pll_rate() / get_periph_clk_div();
+}
+
+int get_serial_clock(void)
+{
+	return get_periph_clk_rate();
+}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
new file mode 100644
index 0000000..b9f6f23
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/wdt.h>
+#include <asm/io.h>
+
+static struct clk_t   *clk = (struct clk_t *)CLK_PM_BASE;
+static struct wdtim_t *wdt = (struct wdtim_t *)WDT_BASE;
+
+void reset_cpu(ulong addr)
+{
+	/* Enable watchdog clock */
+	setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
+
+	/* Reset pulse length is 13005 peripheral clock frames */
+	writel(13000, &wdt->pulse);
+
+	/* Force WDOG_RESET2 and RESOUT_N signal active */
+	writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
+	       &wdt->mctrl);
+
+	while (1)
+		/* NOP */;
+}
+
+#if defined(CONFIG_ARCH_CPU_INIT)
+int arch_cpu_init(void)
+{
+	/*
+	 * It might be necessary to flush data cache, if U-boot is loaded
+	 * from kickstart bootloader, e.g. from S1L loader
+	 */
+	flush_dcache_all();
+
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	printf("CPU:   NXP LPC32XX\n");
+	printf("CPU clock:        %uMHz\n", get_hclk_pll_rate() / 1000000);
+	printf("AHB bus clock:    %uMHz\n", get_hclk_clk_rate() / 1000000);
+	printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
new file mode 100644
index 0000000..613f26a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/uart.h>
+#include <asm/io.h>
+
+static struct clk_t       *clk          = (struct clk_t *)CLK_PM_BASE;
+static struct uart_ctrl_t *uart_control = (struct uart_ctrl_t *)UART_CTRL_BASE;
+
+void lpc32xx_uart_init(unsigned int uart_id)
+{
+	if (uart_id < 1 || uart_id > 7)
+		return;
+
+	/* Disable loopback mode, if it is set by S1L bootloader */
+	clrbits_le32(&uart_control->loop,
+		     UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART));
+
+	if (uart_id < 3 || uart_id > 6)
+		return;
+
+	/* Enable UART system clock */
+	setbits_le32(&clk->uartclk_ctrl, CLK_UART(uart_id));
+
+	/* Place UART in autoclock mode */
+	clrsetbits_le32(&uart_control->clkmode,
+			UART_CLKMODE_MASK(uart_id),
+			UART_CLKMODE_AUTO(uart_id));
+
+	/* Bypass pre-divider of UART clock */
+	writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1),
+	       &clk->u3clk + (uart_id - 3));
+}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
new file mode 100644
index 0000000..43a7b6a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/timer.h>
+#include <asm/io.h>
+
+static struct timer_t *timer0 = (struct timer_t *)TIMER0_BASE;
+static struct timer_t *timer1 = (struct timer_t *)TIMER1_BASE;
+static struct clk_t   *clk    = (struct clk_t *)CLK_PM_BASE;
+
+static void lpc32xx_timer_clock(u32 bit, int enable)
+{
+	if (enable)
+		setbits_le32(&clk->timclk_ctrl1, bit);
+	else
+		clrbits_le32(&clk->timclk_ctrl1, bit);
+}
+
+static void lpc32xx_timer_reset(struct timer_t *timer, u32 freq)
+{
+	writel(TIMER_TCR_COUNTER_RESET,   &timer->tcr);
+	writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
+	writel(0, &timer->tc);
+	writel(0, &timer->pr);
+
+	/* Count mode is every rising PCLK edge */
+	writel(TIMER_CTCR_MODE_TIMER, &timer->ctcr);
+
+	/* Set prescale counter value */
+	writel((get_periph_clk_rate() / freq) - 1, &timer->pr);
+}
+
+static void lpc32xx_timer_count(struct timer_t *timer, int enable)
+{
+	if (enable)
+		writel(TIMER_TCR_COUNTER_ENABLE,  &timer->tcr);
+	else
+		writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
+}
+
+int timer_init(void)
+{
+	lpc32xx_timer_clock(CLK_TIMCLK_TIMER0, 1);
+	lpc32xx_timer_reset(timer0, CONFIG_SYS_HZ);
+	lpc32xx_timer_count(timer0, 1);
+
+	return 0;
+}
+
+ulong get_timer(ulong base)
+{
+	return readl(&timer0->tc) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 1);
+	lpc32xx_timer_reset(timer1, CONFIG_SYS_HZ * 1000);
+	lpc32xx_timer_count(timer1, 1);
+
+	while (readl(&timer1->tc) < usec)
+		/* NOP */;
+
+	lpc32xx_timer_count(timer1, 0);
+	lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 0);
+}
+
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h b/arch/arm/include/asm/arch-lpc32xx/clk.h
new file mode 100644
index 0000000..669c97d
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/clk.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_CLK_H
+#define _LPC32XX_CLK_H
+
+#include <asm/types.h>
+
+#define OSC_CLK_FREQUENCY	13000000
+#define RTC_CLK_FREQUENCY	32768
+
+/* Clocking and Power Control Registers */
+struct clk_t {
+	u32 reserved0[5];
+	u32 boot_map;		/* Boot Map Control Register		*/
+	u32 p0_intr_er;		/* Port 0/1 Start and Interrupt Enable	*/
+	u32 usbdiv_ctrl;	/* USB Clock Pre-Divide Register	*/
+	/* Internal Start Signal Sources Registers	*/
+	u32 start_er_int;	/* Start Enable Register		*/
+	u32 start_rsr_int;	/* Start Raw Status Register		*/
+	u32 start_sr_int;	/* Start Status Register		*/
+	u32 start_apr_int;	/* Start Activation Polarity Register	*/
+	/* Device Pin Start Signal Sources Registers	*/
+	u32 start_er_pin;	/* Start Enable Register		*/
+	u32 start_rsr_pin;	/* Start Raw Status Register		*/
+	u32 start_sr_pin;	/* Start Status Register		*/
+	u32 start_apr_pin;	/* Start Activation Polarity Register	*/
+	/* Clock Control Registers			*/
+	u32 hclkdiv_ctrl;	/* HCLK Divider Control Register	*/
+	u32 pwr_ctrl;		/* Power Control Register		*/
+	u32 pll397_ctrl;	/* PLL397 Control Register		*/
+	u32 osc_ctrl;		/* Main Oscillator Control Register	*/
+	u32 sysclk_ctrl;	/* SYSCLK Control Register		*/
+	u32 lcdclk_ctrl;	/* LCD Clock Control Register		*/
+	u32 hclkpll_ctrl;	/* HCLK PLL Control Register		*/
+	u32 reserved1;
+	u32 adclk_ctrl1;	/* ADC Clock Control1 Register		*/
+	u32 usb_ctrl;		/* USB Control Register			*/
+	u32 sdramclk_ctrl;	/* SDRAM Clock Control Register		*/
+	u32 ddr_lap_nom;	/* DDR Calibration Nominal Value	*/
+	u32 ddr_lap_count;	/* DDR Calibration Measured Value	*/
+	u32 ddr_cal_delay;	/* DDR Calibration Delay Value		*/
+	u32 ssp_ctrl;		/* SSP Control Register			*/
+	u32 i2s_ctrl;		/* I2S Clock Control Register		*/
+	u32 ms_ctrl;		/* Memory Card Control Register		*/
+	u32 reserved2[3];
+	u32 macclk_ctrl;	/* Ethernet MAC Clock Control Register	*/
+	u32 reserved3[4];
+	u32 test_clk;		/* Test Clock Selection Register	*/
+	u32 sw_int;		/* Software Interrupt Register		*/
+	u32 i2cclk_ctrl;	/* I2C Clock Control Register		*/
+	u32 keyclk_ctrl;	/* Keyboard Scan Clock Control Register	*/
+	u32 adclk_ctrl;		/* ADC Clock Control Register		*/
+	u32 pwmclk_ctrl;	/* PWM Clock Control Register		*/
+	u32 timclk_ctrl;	/* Watchdog and Highspeed Timer Control */
+	u32 timclk_ctrl1;	/* Motor and Timer Clock Control	*/
+	u32 spi_ctrl;		/* SPI Control Register			*/
+	u32 flashclk_ctrl;	/* NAND Flash Clock Control Register	*/
+	u32 reserved4;
+	u32 u3clk;		/* UART 3 Clock Control Register	*/
+	u32 u4clk;		/* UART 4 Clock Control Register	*/
+	u32 u5clk;		/* UART 5 Clock Control Register	*/
+	u32 u6clk;		/* UART 6 Clock Control Register	*/
+	u32 irdaclk;		/* IrDA Clock Control Register		*/
+	u32 uartclk_ctrl;	/* UART Clock Control Register		*/
+	u32 dmaclk_ctrl;	/* DMA Clock Control Register		*/
+	u32 autoclk_ctrl;	/* Autoclock Control Register		*/
+};
+
+/* HCLK Divider Control Register bits */
+#define CLK_HCLK_DDRAM_HALF		(0x2 << 7)
+#define CLK_HCLK_DDRAM_NOMINAL		(0x1 << 7)
+#define CLK_HCLK_DDRAM_STOPPED		(0x0 << 7)
+#define CLK_HCLK_PERIPH_DIV_MASK	(0x1F << 2)
+#define CLK_HCLK_PERIPH_DIV(n)		(((n - 1) & 0x1F) << 2)
+#define CLK_HCLK_ARM_PLL_DIV_MASK	(0x3 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_4		(0x2 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_2		(0x1 << 0)
+#define CLK_HCLK_ARM_PLL_DIV_1		(0x0 << 0)
+
+/* Power Control Register bits */
+#define CLK_PWR_HCLK_RUN_PERIPH		(1 << 10)
+#define CLK_PWR_EMC_SREFREQ		(1 << 9)
+#define CLK_PWR_EMC_SREFREQ_UPDATE	(1 << 8)
+#define CLK_PWR_SDRAM_SREFREQ		(1 << 7)
+#define CLK_PWR_HIGHCORE_LEVEL		(1 << 5)
+#define CLK_PWR_SYSCLKEN_LEVEL		(1 << 4)
+#define CLK_PWR_SYSCLKEN_CTRL		(1 << 3)
+#define CLK_PWR_NORMAL_RUN		(1 << 2)
+#define CLK_PWR_HIGHCORE_CTRL		(1 << 1)
+#define CLK_PWR_STOP_MODE		(1 << 0)
+
+/* SYSCLK Control Register bits */
+#define CLK_SYSCLK_PLL397		(1 << 1)
+#define CLK_SYSCLK_MUX			(1 << 0)
+
+/* HCLK PLL Control Register bits */
+#define CLK_HCLK_PLL_OPERATING		(1 << 16)
+#define CLK_HCLK_PLL_BYPASS		(1 << 15)
+#define CLK_HCLK_PLL_DIRECT		(1 << 14)
+#define CLK_HCLK_PLL_FEEDBACK		(1 << 13)
+#define CLK_HCLK_PLL_POSTDIV_MASK	(0x3 << 11)
+#define CLK_HCLK_PLL_POSTDIV_16		(0x3 << 11)
+#define CLK_HCLK_PLL_POSTDIV_8		(0x2 << 11)
+#define CLK_HCLK_PLL_POSTDIV_4		(0x1 << 11)
+#define CLK_HCLK_PLL_POSTDIV_2		(0x0 << 11)
+#define CLK_HCLK_PLL_PREDIV_MASK	(0x3 << 9)
+#define CLK_HCLK_PLL_PREDIV_4		(0x3 << 9)
+#define CLK_HCLK_PLL_PREDIV_3		(0x2 << 9)
+#define CLK_HCLK_PLL_PREDIV_2		(0x1 << 9)
+#define CLK_HCLK_PLL_PREDIV_1		(0x0 << 9)
+#define CLK_HCLK_PLL_FEEDBACK_DIV_MASK	(0xFF << 1)
+#define CLK_HCLK_PLL_FEEDBACK_DIV(n)	(((n - 1) & 0xFF) << 1)
+#define CLK_HCLK_PLL_LOCKED		(1 << 0)
+
+/* Ethernet MAC Clock Control Register bits	*/
+#define CLK_MAC_RMII			(0x3 << 3)
+#define CLK_MAC_MII			(0x1 << 3)
+#define CLK_MAC_MASTER			(1 << 2)
+#define CLK_MAC_SLAVE			(1 << 1)
+#define CLK_MAC_REG			(1 << 0)
+
+/* Timer Clock Control1 Register bits */
+#define CLK_TIMCLK_MOTOR		(1 << 6)
+#define CLK_TIMCLK_TIMER3		(1 << 5)
+#define CLK_TIMCLK_TIMER2		(1 << 4)
+#define CLK_TIMCLK_TIMER1		(1 << 3)
+#define CLK_TIMCLK_TIMER0		(1 << 2)
+#define CLK_TIMCLK_TIMER5		(1 << 1)
+#define CLK_TIMCLK_TIMER4		(1 << 0)
+
+/* Timer Clock Control Register bits */
+#define CLK_TIMCLK_HSTIMER		(1 << 1)
+#define CLK_TIMCLK_WATCHDOG		(1 << 0)
+
+/* UART Clock Control Register bits */
+#define CLK_UART(n)			(1 << ((n) - 3))
+
+/* UARTn Clock Select Registers bits */
+#define CLK_UART_HCLK			(1 << 16)
+#define CLK_UART_X_DIV(n)		(((n) & 0xFF) << 8)
+#define CLK_UART_Y_DIV(n)		(((n) & 0xFF) << 0)
+
+/* DMA Clock Control Register bits */
+#define CLK_DMA_ENABLE			(1 << 0)
+
+unsigned int get_sys_clk_rate(void);
+unsigned int get_hclk_pll_rate(void);
+unsigned int get_hclk_clk_div(void);
+unsigned int get_hclk_clk_rate(void);
+unsigned int get_periph_clk_div(void);
+unsigned int get_periph_clk_rate(void);
+
+#endif /* _LPC32XX_CLK_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h
new file mode 100644
index 0000000..25b75ef
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/config.h
@@ -0,0 +1,76 @@
+/*
+ * Common definitions for LPC32XX board configurations
+ *
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_CONFIG_H
+#define _LPC32XX_CONFIG_H
+
+/* Basic CPU architecture */
+#define CONFIG_ARM926EJS
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_NR_DRAM_BANKS_MAX	2
+
+/* 1KHz clock tick */
+#define CONFIG_SYS_HZ			1000
+
+/* UART configuration */
+#if CONFIG_SYS_LPC32XX_UART >= 3 && CONFIG_SYS_LPC32XX_UART <= 6
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_CONS_INDEX		(CONFIG_SYS_LPC32XX_UART - 2)
+#elif	CONFIG_SYS_LPC32XX_UART == 1 || CONFIG_SYS_LPC32XX_UART == 2 || \
+	CONFIG_SYS_LPC32XX_UART == 7
+#define CONFIG_LPC32XX_HSUART
+#else
+#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
+#endif
+
+#if defined(CONFIG_SYS_NS16550_SERIAL)
+#define CONFIG_SYS_NS16550
+
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
+#define CONFIG_SYS_NS16550_COM1		UART3_BASE
+#define CONFIG_SYS_NS16550_COM2		UART4_BASE
+#define CONFIG_SYS_NS16550_COM3		UART5_BASE
+#define CONFIG_SYS_NS16550_COM4		UART6_BASE
+#endif
+
+#if defined(CONFIG_LPC32XX_HSUART)
+#if	CONFIG_SYS_LPC32XX_UART == 1
+#define HS_UART_BASE			HS_UART1_BASE
+#elif	CONFIG_SYS_LPC32XX_UART == 2
+#define HS_UART_BASE			HS_UART2_BASE
+#else	/* CONFIG_SYS_LPC32XX_UART == 7 */
+#define HS_UART_BASE			HS_UART7_BASE
+#endif
+#endif
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+		{ 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
+
+/* NOR Flash */
+#if defined(CONFIG_SYS_FLASH_CFI)
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_PROTECTION
+#endif
+
+#endif /* _LPC32XX_CONFIG_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/cpu.h b/arch/arm/include/asm/arch-lpc32xx/cpu.h
new file mode 100644
index 0000000..c5343c3
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/cpu.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_CPU_H
+#define _LPC32XX_CPU_H
+
+/* LPC32XX Memory map */
+
+/* AHB physical base addresses */
+#define SLC_NAND_BASE	0x20020000	/* SLC NAND Flash registers base    */
+#define SSP0_BASE	0x20084000	/* SSP0 registers base              */
+#define SD_CARD_BASE	0x20098000	/* SD card interface registers base */
+#define MLC_NAND_BASE	0x200A8000	/* MLC NAND Flash registers base    */
+#define DMA_BASE	0x31000000	/* DMA controller registers base    */
+#define USB_BASE	0x31020000	/* USB registers base               */
+#define LCD_BASE	0x31040000	/* LCD registers base               */
+#define ETHERNET_BASE	0x31060000	/* Ethernet registers base          */
+#define EMC_BASE	0x31080000	/* EMC configuration registers base */
+
+/* FAB peripherals base addresses */
+#define CLK_PM_BASE	0x40004000	/* System control registers base    */
+#define HS_UART1_BASE	0x40014000	/* High speed UART 1 registers base */
+#define HS_UART2_BASE	0x40018000	/* High speed UART 2 registers base */
+#define HS_UART7_BASE	0x4001C000	/* High speed UART 7 registers base */
+#define RTC_BASE	0x40024000	/* RTC registers base               */
+#define GPIO_BASE	0x40028000	/* GPIO registers base              */
+#define WDT_BASE	0x4003C000	/* Watchdog timer registers base    */
+#define TIMER0_BASE	0x40044000	/* Timer0 registers base            */
+#define TIMER1_BASE	0x4004C000	/* Timer1 registers base            */
+#define UART_CTRL_BASE	0x40054000	/* UART control regsisters base     */
+
+/* APB peripherals base addresses */
+#define UART3_BASE	0x40080000	/* UART 3 registers base            */
+#define UART4_BASE	0x40088000	/* UART 4 registers base            */
+#define UART5_BASE	0x40090000	/* UART 5 registers base            */
+#define UART6_BASE	0x40098000	/* UART 6 registers base            */
+
+/* External SDRAM Memory Bank base addresses */
+#define EMC_DYCS0_BASE	0x80000000	/* SDRAM DYCS0 base address         */
+#define EMC_DYCS1_BASE	0xA0000000	/* SDRAM DYCS1 base address         */
+
+/* External Static Memory Bank base addresses */
+#define EMC_CS0_BASE	0xE0000000
+#define EMC_CS1_BASE	0xE1000000
+#define EMC_CS2_BASE	0xE2000000
+#define EMC_CS3_BASE	0xE3000000
+
+#endif /* _LPC32XX_CPU_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/emc.h b/arch/arm/include/asm/arch-lpc32xx/emc.h
new file mode 100644
index 0000000..3c79c90
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/emc.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_EMC_H
+#define _LPC32XX_EMC_H
+
+#include <asm/types.h>
+
+/* EMC Registers */
+struct emc_t {
+	u32 ctrl;		/* Controls operation of the EMC             */
+	u32 status;		/* Provides EMC status information           */
+	u32 config;		/* Configures operation of the EMC           */
+	u32 reserved0[5];
+	u32 control;		/* Controls dyn memory operation             */
+	u32 refresh;		/* Configures dyn memory refresh operation   */
+	u32 read_config;	/* Configures the dyn memory read strategy   */
+	u32 reserved1;
+	u32 t_rp;		/* Precharge command period                  */
+	u32 t_ras;		/* Active to precharge command period        */
+	u32 t_srex;		/* Self-refresh exit time                    */
+	u32 reserved2[2];
+	u32 t_wr;		/* Write recovery time                       */
+	u32 t_rc;		/* Active to active command period           */
+	u32 t_rfc;		/* Auto-refresh period                       */
+	u32 t_xsr;		/* Exit self-refresh to active command time  */
+	u32 t_rrd;		/* Active bank A to active bank B latency    */
+	u32 t_mrd;		/* Load mode register to active command time */
+	u32 t_cdlr;		/* Last data in to read command time         */
+	u32 reserved3[8];
+	u32 extended_wait;	/* time for static memory rd/wr transfers    */
+	u32 reserved4[31];
+	u32 config0;		/* Configuration information for the SDRAM   */
+	u32 rascas0;		/* RAS and CAS latencies for the SDRAM       */
+	u32 reserved5[6];
+	u32 config1;		/* Configuration information for the SDRAM   */
+	u32 rascas1;		/* RAS and CAS latencies for the SDRAM       */
+	u32 reserved6[54];
+	struct emc_stat_t {
+		u32 config;	/* Static memory configuration               */
+		u32 waitwen;	/* Delay from chip select to write enable    */
+		u32 waitoen;	/* Delay to output enable                    */
+		u32 waitrd;	/* Delay to a read access                    */
+		u32 waitpage;	/* Delay for async page mode read            */
+		u32 waitwr;	/* Delay to a write access                   */
+		u32 waitturn;	/* Number of bus turnaround cycles           */
+		u32 reserved;
+	} stat[4];
+	u32 reserved7[96];
+	struct emc_ahb_t {
+		u32 control;	/* Control register for AHB                  */
+		u32 status;	/* Status register for AHB                   */
+		u32 timeout;	/* Timeout register for AHB                  */
+		u32 reserved[5];
+	} ahb[5];
+};
+
+/* Static Memory Configuration Register bits */
+#define EMC_STAT_CONFIG_WP		(1 << 20)
+#define EMC_STAT_CONFIG_EW		(1 << 8)
+#define EMC_STAT_CONFIG_PB		(1 << 7)
+#define EMC_STAT_CONFIG_PC		(1 << 6)
+#define EMC_STAT_CONFIG_PM		(1 << 3)
+#define EMC_STAT_CONFIG_32BIT		(2 << 0)
+#define EMC_STAT_CONFIG_16BIT		(1 << 0)
+#define EMC_STAT_CONFIG_8BIT		(0 << 0)
+
+/* Static Memory Delay Registers */
+#define EMC_STAT_WAITWEN(n)		((n - 1) & 0x0F)
+#define EMC_STAT_WAITOEN(n)		((n - 1) & 0x0F)
+#define EMC_STAT_WAITRD(n)		((n - 1) & 0x1F)
+#define EMC_STAT_WAITPAGE(n)		((n - 1) & 0x1F)
+#define EMC_STAT_WAITWR(n)		((n - 2) & 0x1F)
+#define EMC_STAT_WAITTURN(n)		((n - 1) & 0x0F)
+
+#endif /* _LPC32XX_EMC_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
new file mode 100644
index 0000000..0a10aef
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+void lpc32xx_uart_init(unsigned int uart_id);
+
+#endif
diff --git a/arch/arm/include/asm/arch-lpc32xx/timer.h b/arch/arm/include/asm/arch-lpc32xx/timer.h
new file mode 100644
index 0000000..5050df3
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/timer.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_TIMER_H
+#define _LPC32XX_TIMER_H
+
+#include <asm/types.h>
+
+/* Timer/Counter Registers */
+struct timer_t {
+	u32 ir;			/* Interrupt Register		*/
+	u32 tcr;		/* Timer Control Register	*/
+	u32 tc;			/* Timer Counter		*/
+	u32 pr;			/* Prescale Register		*/
+	u32 pc;			/* Prescale Counter		*/
+	u32 mcr;		/* Match Control Register	*/
+	u32 mr[4];		/* Match Registers		*/
+	u32 ccr;		/* Capture Control Register	*/
+	u32 cr[4];		/* Capture Registers		*/
+	u32 emr;		/* External Match Register	*/
+	u32 reserved[12];
+	u32 ctcr;		/* Count Control Register	*/
+};
+
+/* Timer/Counter Interrupt Register bits */
+#define TIMER_IR_CR(n)			(1 << ((n) + 4))
+#define TIMER_IR_MR(n)			(1 << (n))
+
+/* Timer/Counter Timer Control Register bits */
+#define TIMER_TCR_COUNTER_RESET		(1 << 1)
+#define TIMER_TCR_COUNTER_ENABLE	(1 << 0)
+#define TIMER_TCR_COUNTER_DISABLE	(0 << 0)
+
+/* Timer/Counter Match Control Register bits */
+#define TIMER_MCR_STOP(n)		(1 << (3 * (n) + 2))
+#define TIMER_MCR_RESET(n)		(1 << (3 * (n) + 1))
+#define TIMER_MCR_INTERRUPT(n)		(1 << (3 * (n)))
+
+/* Timer/Counter Capture Control Register bits */
+#define TIMER_CCR_INTERRUPT(n)		(1 << (3 * (n) + 2))
+#define TIMER_CCR_FALLING_EDGE(n)	(1 << (3 * (n) + 1))
+#define TIMER_CCR_RISING_EDGE(n)	(1 << (3 * (n)))
+
+/* Timer/Counter External Match Register bits */
+#define TIMER_EMR_EMC_TOGGLE(n)		(0x3 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_SET(n)		(0x2 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_CLEAR(n)		(0x1 << (2 * (n) + 4))
+#define TIMER_EMR_EMC_NOTHING(n)	(0x0 << (2 * (n) + 4))
+#define TIMER_EMR_EM(n)			(1 << (n))
+
+/* Timer/Counter Count Control Register bits */
+#define TIMER_CTCR_INPUT(n)		((n) << 2)
+#define TIMER_CTCR_MODE_COUNTER_BOTH	(0x3 << 0)
+#define TIMER_CTCR_MODE_COUNTER_FALLING	(0x2 << 0)
+#define TIMER_CTCR_MODE_COUNTER_RISING	(0x1 << 0)
+#define TIMER_CTCR_MODE_TIMER		(0x0 << 0)
+
+#endif /* _LPC32XX_TIMER_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/uart.h b/arch/arm/include/asm/arch-lpc32xx/uart.h
new file mode 100644
index 0000000..3c7e561
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/uart.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_UART_H
+#define _LPC32XX_UART_H
+
+#include <asm/types.h>
+
+/* UART Control Registers */
+struct uart_ctrl_t {
+	u32 ctrl;		/* Control Register		*/
+	u32 clkmode;		/* Clock Mode Register		*/
+	u32 loop;		/* Loopback Control Register	*/
+};
+
+/* UART Control Register bits */
+#define UART_CTRL_UART3_MD_CTRL		(1 << 11)
+#define UART_CTRL_HDPX_INV		(1 << 10)
+#define UART_CTRL_HDPX_EN		(1 << 9)
+#define UART_CTRL_UART6_IRDA		(1 << 5)
+#define UART_CTRL_IR_TX6_INV		(1 << 4)
+#define UART_CTRL_IR_RX6_INV		(1 << 3)
+#define UART_CTRL_IR_RX_LENGTH		(1 << 2)
+#define UART_CTRL_IR_TX_LENGTH		(1 << 1)
+#define UART_CTRL_UART5_USB_MODE	(1 << 0)
+
+/* UART Clock Mode Register bits */
+#define UART_CLKMODE_STATX(n)		(1 << ((n) + 16))
+#define UART_CLKMODE_STAT		(1 << 14)
+#define UART_CLKMODE_MASK(n)		(0x3 << (2 * (n) - 2))
+#define UART_CLKMODE_AUTO(n)		(0x2 << (2 * (n) - 2))
+#define UART_CLKMODE_ON(n)		(0x1 << (2 * (n) - 2))
+#define UART_CLKMODE_OFF(n)		(0x0 << (2 * (n) - 2))
+
+/* UART Loopback Control Register bits */
+#define UART_LOOPBACK(n)		(1 << ((n) - 1))
+
+#endif /* _LPC32XX_UART_H */
diff --git a/arch/arm/include/asm/arch-lpc32xx/wdt.h b/arch/arm/include/asm/arch-lpc32xx/wdt.h
new file mode 100644
index 0000000..bf93f12
--- /dev/null
+++ b/arch/arm/include/asm/arch-lpc32xx/wdt.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef _LPC32XX_WDT_H
+#define _LPC32XX_WDT_H
+
+#include <asm/types.h>
+
+/* Watchdog Timer Registers */
+struct wdtim_t {
+	u32 isr;		/* Interrupt Status Register		*/
+	u32 ctrl;		/* Control Register			*/
+	u32 counter;		/* Counter Value Register		*/
+	u32 mctrl;		/* Match Control Register		*/
+	u32 match0;		/* Match 0 Register			*/
+	u32 emr;		/* External Match Control Register	*/
+	u32 pulse;		/* Reset Pulse Length Register		*/
+	u32 res;		/* Reset Source Register		*/
+};
+
+/* Watchdog Timer Control Register bits */
+#define WDTIM_CTRL_PAUSE_EN		(1 << 2)
+#define WDTIM_CTRL_RESET_COUNT		(1 << 1)
+#define WDTIM_CTRL_COUNT_ENAB		(1 << 0)
+
+/* Watchdog Timer Match Control Register bits */
+#define WDTIM_MCTRL_RESFRC2		(1 << 6)
+#define WDTIM_MCTRL_RESFRC1		(1 << 5)
+#define WDTIM_MCTRL_M_RES2		(1 << 4)
+#define WDTIM_MCTRL_M_RES1		(1 << 3)
+#define WDTIM_MCTRL_STOP_COUNT0		(1 << 2)
+#define WDTIM_MCTRL_RESET_COUNT0	(1 << 1)
+#define WDTIM_MCTRL_MR0_INT		(1 << 0)
+
+#endif /* _LPC32XX_WDT_H */
-- 
1.7.5.4



More information about the U-Boot mailing list